Roth-nembo

Mfumo wa Compact wa Roth QuickTemp

Roth-QuickTemp-Compact-System-Product

Vipimo vya Bidhaa

  • Vipimo: 61 cm x 61 cm x 40 cm
  • Upeo wa mzigo: 2mm kwa mita
  • Mkutano unahitajika

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Vuta sakafu ya chini. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Grooves kati ya sahani lazima iwe sawa.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Tumia sahani za kuhamisha kwa mabomba ya kulisha/kuziba mapengo.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Sakinisha bomba vizuri/karibu na mduara wa ndani kwa zamu.

Roth-QuickTemp-Compact-System-Fig- (11)

Weka mabomba na fanya mtihani wa shinikizo.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Hatua za Ufungaji

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Angalia utulivu na ufanye marekebisho ikiwa ni lazima.
  8. Bidhaa yako sasa iko tayari kutumika!

Maswali Yanayoulizwa Mara kwa Mara

Ni nini uwezo wa juu wa mzigo wa bidhaa?

The maximum load capacity is 2mm per meter.

Je, ninahitaji zana zozote za ziada za kusanyiko?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Je, bidhaa inaweza kugawanywa kwa kuhifadhi?

Yes, the product can be disassembled following the reverse order of the installation steps.

Nyaraka / Rasilimali

Mfumo wa Compact wa Roth QuickTemp [pdf] Mwongozo wa Ufungaji
Mfumo wa Compact wa QuickTemp, QuickTemp, Mfumo wa Compact, Mfumo

Marejeleo

Acha maoni

Barua pepe yako haitachapishwa. Sehemu zinazohitajika zimetiwa alama *