LTECH M9 LED Controller Instruction Manual

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Vigezo vya Kiufundi

Vipimo

Ufungaji wa Bidhaa

Njia mbili za kurekebisha kishikiliaji cha mbali:

1. Kurekebisha mmiliki wa kijijini katika ukuta na screws mbili.
2. Rekebisha kishikiliaji cha mbali kwenye ukuta na wambiso wa 3M.

Kumbuka: Tafadhali ondoa kichupo cha betri kabla ya matumizi ya kwanza

Kazi za Kitufe

• Washa/Zima: Press briefly to turn the light on or off.
• Nyekundu/Kijani/Bluu: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Kasi/Mwangaza +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Examp1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Examp2:Red, Blue Two colors, Jump/Fade/Strobe
   Examp3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

HAPANA.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Rukia	Fifisha	Strobe
1	Nyeusi
2	Nyekundu	Tuli Nyekundu	Red Fade In and Out	Strobe Nyekundu
3	Kijani	Tuli Kijani	Green Fade In and Out	Strobe ya Kijani
4	Bluu	Bluu tuli	Bluu Inafifia Ndani na Nje	Strobe ya Bluu
5	Njano	Njano tuli	Yellow Fade In and Out	Strobe ya Njano
6	Zambarau	Zambarau tuli	Purple Fade In and Out	Zambarau Strobe
7	Cyan	Sia Tuli	Cyan Fade In and Out	Strobe ya Cyan
8	Nyeupe	Nyeupe tuli	White Fade In and Out	Strobe Nyeupe
9	Nyekundu/Kijani/Bluu	Rukia Nyekundu-Kijani-Bluu	Nyekundu-Kijani-Bluu Inafifia	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Kumbuka: One remote control can control an unlimited number of controllers

Weka upya Kazi ya Kitufe

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Ulinganishaji wa Kanuni

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Zima kidhibiti;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Kusafisha Kanuni

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Hali ya Mwanga wa Kiashiria

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Kumbuka: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Usafiri na Uhifadhi

1.  Usafiri
   Bidhaa zinaweza kusafirishwa kupitia magari, boti na ndege.
   Wakati wa usafirishaji, bidhaa zinapaswa kulindwa kutokana na mvua na jua. Tafadhali epuka mshtuko mkali na mtetemo wakati wa upakiaji na upakuaji.
2. Hifadhi
   Masharti ya uhifadhi yanapaswa kuzingatia Viwango vya Mazingira vya Hatari ya I. Bidhaa ambazo zimehifadhiwa kwa zaidi ya miezi sita zinapendekezwa kukaguliwa tena na zinaweza kutumika tu baada ya kuhitimu.

Makini
Tafadhali tumia katika mazingira kavu ya ndani;

• Wakati wa kusakinisha betri, tafadhali unganisha terminal chanya na hasi kwa usahihi. Ikiwa kidhibiti cha mbali hakitatumika kwa muda mrefu, toa betri nje;
• Wakati umbali wa mbali umefupishwa na au kidhibiti cha mbali hakifanyi kazi mara kwa mara, tafadhali badilisha betri kwa wakati;
• Tafadhali ichukue kwa uangalifu na kuiweka chini ili kuzuia maporomoko ambayo husababisha uharibifu;
• Hitilafu ikitokea, tafadhali usijaribu kurekebisha bidhaa peke yako. Ikiwa una swali lolote, tafadhali wasiliana na wasambazaji wako.
• Mwongozo huu unaweza kubadilika bila taarifa zaidi. Kazi za bidhaa zinategemea bidhaa. Tafadhali jisikie huru kuwasiliana na wasambazaji wetu rasmi ikiwa una swali lolote.

Mkataba wa Udhamini

Vipindi vya udhamini kutoka tarehe ya kujifungua: miaka 5.
Ukarabati wa bure au huduma za uingizwaji kwa shida za ubora hutolewa ndani ya muda wa udhamini.

Kutengwa kwa udhamini hapa chini:
Masharti yafuatayo hayako ndani ya safu ya dhamana ya ukarabati wa bure au huduma zingine:

• Zaidi ya muda wa udhamini;
• Uharibifu wowote wa bandia unaosababishwa na sauti ya juutage, overload, or improper operations; Products with severe physical damage;
• Uharibifu unaosababishwa na majanga ya asili na nguvu majeure;
• Lebo za udhamini na misimbopau zimeharibiwa.
• Hakuna mkataba wowote uliosainiwa na kampuni yetu.

1. Urekebishaji au uingizwaji unaotolewa ndio suluhisho pekee kwa wateja. Kampuni yetu haiwajibiki kwa uharibifu wowote wa bahati mbaya au unaotokana na uharibifu isipokuwa kama uko ndani ya sheria.
2.  Kampuni yetu ina haki ya kurekebisha au kurekebisha masharti ya udhamini huu, na kutolewa kwa maandishi kutatawala.

ONYO

• HATARI YA KUmeza: Bidhaa hii ina kitufe cha seli au betri ya sarafu.
• KIFO au jeraha kubwa linaweza kutokea likimezwa.
• Seli ya kitufe kilichomezwa au betri ya sarafu inaweza kusababisha Kuungua kwa kemikali ya Ndani kwa muda wa saa 2.
• WEKA betri mpya na zilizotumika NJE YA WATOTO
• Tafuta matibabu ya haraka ikiwa betri inashukiwa kumezwa au kuingizwa ndani ya sehemu yoyote ya mwili.
• Ondoa na urejeshe tena au tupa betri zilizotumika kulingana na kanuni za eneo lako na uweke mbali na watoto. USITUPE betri kwenye takataka za nyumbani au uchome moto.
• Hata betri zilizotumiwa zinaweza kusababisha jeraha kali au kifo.
• Piga simu kwa kituo cha udhibiti wa sumu kwa habari ya matibabu.
• Aina ya betri inayolingana: CR2032.
• Betri ya jina la ujazotage: 3Vdc.
• Betri zisizoweza kuchajiwa hazipaswi kuchajiwa tena.
• Usilazimishe kutoa, kuchaji upya, kutenganisha, joto juu (ukadiriaji wa halijoto uliobainishwa na mtengenezaji) au uchome moto. Kufanya hivyo kunaweza kusababisha jeraha kutokana na kutoa hewa, kuvuja au mlipuko na kusababisha kuungua kwa kemikali.
• Hakikisha betri zimewekwa kwa usahihi kulingana na polarity (+ na -).
• Usichanganye betri za zamani na mpya, chapa tofauti au aina tofauti za betri, kama vile alkali, carbon-zinki, au betri zinazoweza kuchajiwa tena.
• Ondoa na urejeshe tena au tupa betri kutoka kwa vifaa ambavyo havijatumika kwa muda mrefu kulingana na kanuni za mahali hapo.
• Daima salama kabisa sehemu ya betri. Ikiwa sehemu ya betri haifungi kwa usalama, acha kutumia bidhaa, ondoa betri na uziweke mbali na watoto.

Maswali Yanayoulizwa Mara Kwa Mara