Utangulizi
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
Ni nini kwenye Sanduku
Baada ya kufungua kifurushi, utapata vitu vifuatavyo:
- COROS Bike Cadence Sensor
- Mlima wa Sensor
- Rubber Bands for mounting
- Mwongozo wa Kuanza Haraka
- Taarifa za Usalama wa Bidhaa

Kuweka na Kuweka
1. Ufungaji wa Betri
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.

2. Kuweka Sensorer
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.


3. Kuoanisha na Vifaa
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
Maagizo ya Uendeshaji
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
Matengenezo
Uhai wa Batri na Uingizwaji
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
Cleaning and Water Resistance
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp kitambaa. Epuka kutumia kemikali kali au vifaa vya kukwaruza ambavyo vinaweza kuharibu kifaa.
Kutatua matatizo
- Kihisi Hakiunganishi: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- Usomaji usio sahihi: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- Betri inaisha haraka: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
Vipimo
| Chapa | COROS |
| Jina la Mfano | COROS Bike Cadence Sensor |
| Rangi | Nyeusi |
| Aina ya Sensor | Sensor ya Cadence |
| Teknolojia ya Uunganisho | Bluetooth (Not compatible with ANT+ devices) |
| Aina ya Kuweka | Crank Arm Mount |
| Aina ya Betri | CR2032 Lithium Manganese Dioxide |
| Maisha ya Betri | Hadi miezi 12 |
| Ukadiriaji wa Maji | IP67 |
| Uzito | 11g |
| Vipimo vya Bidhaa (LxWxH) | Inchi 3.94 x 3.94 x 3.94 |
Udhamini na Msaada
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka uthibitisho wako wa ununuzi kwa ajili ya uthibitisho wa udhamini.





