Mwongozo wa Maelekezo ya Stendi ya HUANUO HNDMA61B ya Vidhibiti Viwili

1. Utangulizi

Thank you for choosing the HUANUO HNDMA61B Dual Monitor Stand. This freestanding vertical monitor mount is designed to optimize your workspace by allowing you to stack two monitors, ranging from 13 to 34 inches, one above the other. It supports VESA mounting patterns of 50x50mm, 75x75mm, or 100x100mm, and can hold monitors up to 44 lbs. The stand offers extensive adjustability, including swivel, tilt, and rotation, along with 13 height settings to ensure an ergonomic viewing experience and reduce neck and back strain.

2. Taarifa za Usalama

Read this entire instruction manual before installation and assembly. If you do not understand any part of the instructions or have doubts, please contact our U.S.-based support team.
Do not exceed the maximum load capacity of 44 lbs (20 kg). This product is intended for vertical dual monitor use only.
Ensure your monitors are compatible with VESA mounting patterns 50x50mm, 75x75mm, or 100x100mm.
Verify that the mounting surface (desk) is structurally sound to support the combined weight of the stand and monitors.
Use safety gear and proper tools for installation.
Keep children away from the assembly area. Small parts could be swallowed if ingested.

3. Yaliyomo kwenye Kifurushi

Please check that all components are present and undamaged. If any parts are missing or damaged, contact our support team for assistance.

Base (Tempered Glass)
Vertical Pole (2 sections)
VESA Monitor Plates (2)
Monitor Head Brackets (2)
C-Clamp Vifaa vya Kuweka
Vifaa vya Kupachika Grommet
Sehemu za Cable
Assembly Tools (Allen wrenches)
Various Screws and Spacers for VESA mounting

Components of the HUANUO Dual Monitor Stand laid out — Figure 1: All components included in the package for the HUANUO Dual Monitor Stand.

4. Kuweka

4.1. Assemble the Vertical Pole

Connect the two sections of the vertical pole by screwing them together. Ensure they are tightly secured.
Attach the assembled pole to the tempered glass base using the provided screws and Allen wrench.

4.2. Choose and Install Mounting Method

The stand offers two primary mounting options: C-Clamp or Grommet. Select the method suitable for your desk.

Graphic illustrating C-clamp and grommet mounting options for the monitor stand. — Figure 2: Visual representation of C-Clamp na chaguo za kupachika Grommet.

C-Clamp Kupachika:

Ambatanisha C-clamp bracket to the desk edge and tighten the knob until secure.

Uwekaji wa Grommet:

If your desk has a grommet hole, use the grommet base hardware to secure the stand through the hole.

4.3. Attach VESA Plates to Monitors

Weka kwa uangalifu kichungi chako kikiwa chini kwenye uso laini na safi.
Panga bamba la VESA na mashimo ya kupachika nyuma ya skrini yako.
Secure the VESA plate using the appropriate screws and spacers provided. Ensure all four screws are tightened.

4.4. Mount Monitors to the Stand

Slide the monitor heads (with attached VESA plates) onto the vertical pole at your desired height. The stand offers 13 height settings.
Secure each monitor head in place using the locking knobs or screws.

HUANUO Dual Monitor Stand with two monitors stacked vertically on a desk. — Figure 3: The HUANUO Dual Monitor Stand fully assembled with two monitors.

4.5. Usimamizi wa Cable

Use the included cable clips to route your monitor cables neatly along the back of the vertical pole. This helps maintain a clean and organized workspace.

Video 1: A comprehensive installation guide for the monitor stand, demonstrating each step from assembly to cable management.

5. Maagizo ya Uendeshaji

5.1. Marekebisho ya Urefu

The monitor stand features 13 distinct height settings, allowing you to position your monitors at an ergonomic level. To adjust the height, loosen the locking mechanism on the monitor head, slide the monitor to the desired position, and then re-tighten the lock.

Diagram showing 13 height settings for the HUANUO Dual Monitor Stand, with measurements. — Figure 4: The monitor stand offers 13 height settings for optimal viewfaraja.

5.2. Kurekebisha Marekebisho

Adjust the monitor's vertical angle with a tool-free tilt range of -15° to +10°. This allows you to reduce glare and find the most comfortable viewpembe.

Two people adjusting the tilt of their monitors on the stand. — Figure 5: Adjusting the monitor tilt for a perfect viewpembe.

5.3. Swivel and Rotation

The monitor mount allows for a +/-50° swivel, enabling you to share your screen easily. Additionally, smaller monitors can be rotated 360° for instant portrait or landscape orientation.

Images showing monitor swivel and 360-degree rotation capabilities. — Figure 6: Demonstrating the swivel and rotation features for flexible viewing.

6. Matengenezo

Mara kwa mara angalia skrubu na miunganisho yote ili kuhakikisha kuwa zinasalia kuwa ngumu na salama.
Clean the stand and base with a soft, damp kitambaa. Epuka kutumia visafishaji vya abrasive au vimumunyisho ambavyo vinaweza kuharibu umalizio.
Hakikisha nyaya zinasimamiwa ipasavyo ili kuzuia mkazo au uharibifu.

7. Utatuzi wa shida

7.1. Monitor Wobbles or Sags

Suluhisho: Ensure all screws, especially those connecting the monitor heads to the pole and the VESA plates to the monitors, are securely tightened. Verify that the total weight of your monitors does not exceed the 44 lbs (20 kg) maximum load capacity.

7.2. VESA Plate Does Not Fit Monitor

Suluhisho: Double-check your monitor's VESA mounting pattern. This stand supports 50x50mm, 75x75mm, and 100x100mm. If your monitor has a different pattern, it may not be compatible. Ensure you are using the correct screws and spacers for your monitor's depth.

7.3. Difficulty Adjusting Monitor Position

Suluhisho: Loosen the relevant adjustment screws or knobs slightly before attempting to move the monitor. Once in the desired position, re-tighten them firmly.

8. Vipimo

Kipengele	Vipimo
Nambari ya Mfano	HNDMA61B
Utangamano wa Ukubwa wa Skrini	13 hadi 34 inchi
Uwezo wa Juu wa Kupakia	Pauni 44 (kilo 20)
Utangamano wa VESA	50x50mm, 75x75mm, 100x100mm
Mipangilio ya Urefu	13 settings (9.5 to 32.3 inches)
Safu ya Tilt	-15 ° hadi +10 °
Masafa ya kuzunguka	+/-50°
Mzunguko	360°
Nyenzo	Chuma cha Aloi, Kioo Chenye Hasira
Aina ya Kuweka	Tabletop Mount (Freestanding, C-Clamp, Grommet)
Vipimo vya Bidhaa	Inchi 17.44 x 12.52 x 3.11
Uzito wa Kipengee	Pauni 9.11

9. Udhamini na Msaada

HUANUO is committed to providing high-quality products and customer satisfaction. This product comes with a standard manufacturer's warranty. For any questions, concerns, or warranty claims, please contact our U.S.-based support team. Our team is ready to assist you with installation, troubleshooting, or any other product-related inquiries.

Contact information can typically be found on the product packaging or the official HUANUO webtovuti.

	Mwongozo wa Maelekezo ya Kiinua Kiegemeo cha Kinara cha HUANUO HNMSO9 Mwongozo wa maelekezo kwa ajili ya Kiinua Kiegemeo cha Kinachosimamia cha HUANUO HNMSO9, kinachoelezea hatua za uunganishaji, vipuri, na matumizi.
	Mwongozo wa Maelekezo ya Mkono wa HUANUO HNDS8 wa Kichunguzi Kiwili Mwongozo kamili wa maagizo kwa ajili ya mkono wa HUANUO HNDS8 wa kifuatiliaji chenye sehemu mbili, uainishaji wa kina wa usakinishaji, marekebisho, na tahadhari za usalama kwa ajili ya kuweka dawati.
	HUANUO HNHM4 Mwongozo wa Maelekezo ya Dawati Mbili ya Monitor Mwongozo huu unatoa maagizo ya kukusanyika na kutumia Mlima wa Dawati la Kufuatilia Mbili wa HUANUO HNHM4. Inajumuisha maelezo ya usalama, orodha ya sehemu na maunzi, na miongozo ya hatua kwa hatua ya mkusanyiko wa C-clamp na uwekaji wa grommet.
	Mwongozo wa Usakinishaji wa Kifaa cha Kupachika Meza cha Huanuo HNDSK2 Mwongozo kamili wa usakinishaji wa sehemu ya kupachika kwenye dawati la kifuatiliaji cha mikono miwili cha Huanuo HNDSK2. Jifunze jinsi ya kuunganisha, kusakinisha, na kurekebisha sehemu yako ya kupachika kwenye kifuatiliaji kwa ubora wa hali ya juu. viewing.
	HUANUO HNDS8 Mwongozo wa Maelekezo ya Mlima wa Kufuatilia Gesi Mbili Mwongozo wa kina wa Mlima wa Kufuatilia Gesi Mbili wa HUANUO HNDS8, unaoeleza kwa kina hatua za usakinishaji, tahadhari za usalama, uzani na uoanifu wa VESA, na taratibu za urekebishaji za upangaji bora zaidi.
	Mwongozo wa Usakinishaji wa Mkono wa HUANUO HNDS8 wa Kichunguzi Kiwili Mwongozo kamili wa maagizo kwa ajili ya mkono wa HUANUO HNDS8 wa kifuatiliaji chenye sehemu mbili, unaoshughulikia usakinishaji, ukaguzi wa utangamano, marekebisho, na miongozo ya usalama kwa ajili ya kuweka dawati.

HUANUO HNDMA61B