SwitchBot Lock Pro and Fingerprint Authentication Pad Instruction Manual

1. Utangulizi

This manual provides detailed instructions for the installation, operation, and maintenance of your SwitchBot Lock Pro and Fingerprint Authentication Pad. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Taarifa za Usalama

Ensure the door surface is clean and dry before installation.
Tumia vifaa vilivyotolewa pekee kwa ajili ya usakinishaji.
Keep the device away from extreme temperatures and moisture.
Usijaribu kutenganisha au kutengeneza kifaa mwenyewe. Wasiliana na usaidizi kwa wateja kwa usaidizi.
After using adhesion promoter, always wash your hands thoroughly.

3. Kuweka

3.1 Items to Prepare

Before you begin, ensure you have the following items:

SwitchBot Lock Pro unit
Sumaku
Phillips bisibisi
Kusafisha tishu
Mkuzaji wa kujitoa
Reinforcing tape

3.2 Installing the Thumb Turn Holder

Remove the thumb turn holder from the Lock Pro unit.
Adjust the attachment to its maximum extension using a screwdriver.
Place the holder over your door's thumb turn and tighten the screws to secure it. Ensure the center of rotation is aligned as much as possible.

3.3 Adjusting Lock Pro Height and Position

Remove the four screws from the back panel of the Lock Pro unit.
Place the Lock Pro unit over the installed thumb turn holder. Adjust the height of the plate to match the thumb turn's height.
Mark the position for attaching the Lock Pro unit with a pencil. Remember the height of the adjustment plate and the screw hole positions.
While keeping the attachment on the thumb turn, remove the Lock Pro main unit.
Tighten the screws of the height adjustment plate at the previously marked positions.

3.4 Preparing the Door Surface

Using a cleaning tissue, wipe off any dust or dirt from the door surface where the Lock Pro will be attached.
Wipe the desired attachment position with the adhesion promoter. (Remember to wash your hands thoroughly after use.)

3.5 Attaching Lock Pro

Peel off the protective seal from the back of the Lock Pro unit.
Carefully align the central axis of the attachment with the center of the thumb turn.
Attach the Lock Pro unit to the door surface. Hold it firmly in place for approximately 2.5 minutes to ensure strong adhesion.

3.6 Ufungaji wa Sumaku

The magnet helps the Lock Pro detect the door's open/closed status.

Peel off the protective sheet from the 3M double-sided tape on the magnet.
Attach the magnet to the door frame, ensuring it is parallel to the Lock Pro unit and the distance between them is within 3cm.

3.7 Reinforcing Tape (Optional)

If you are concerned about the Lock Pro coming off with just double-sided tape, you can use the reinforcing tape.

Apply the reinforcing tape around the Lock Pro unit and onto the door surface.
Hold the Lock Pro unit firmly by hand for approximately 2.5 minutes.
Gently peel off the reinforcing tape after 48 hours. The Lock Pro can be used normally during this period.

3.8 App Pairing and Calibration

After physical installation, pair the Lock Pro with the SwitchBot app and calibrate it.

Pull out the insulation sheet from the Lock Pro unit.
Follow the app's instructions to add the device and perform calibration.

Video: SwitchBot Lock Pro Installation Method. This video demonstrates the step-by-step process of installing the Lock Pro unit on your door, including preparing the surface, attaching the thumb turn holder, and securing the main unit.

4. Kuendesha Lock Pro

The SwitchBot Lock Pro offers multiple convenient ways to unlock your door:

Utambuzi wa Alama ya vidole: With the Fingerprint Authentication Pad, your fingerprint becomes your key. It boasts over 98% accuracy, recognizing fingerprints from children and the elderly reliably.
NFC Card/IC Card: Compatible with transportation IC cards like Suica, PASMO, and Felica, as well as other NFC cards. Simply tap your card or a smartphone/smartwatch registered with an IC card to unlock.
Nywila za Muda: Generate time-limited passwords for friends or one-time passwords for services like house cleaning.
Udhibiti wa Sauti: Integrate with Alexa for hands-free unlocking. For example, say "Alexa, unlock the door."
Apple Watch: Unlock your door conveniently with your Apple Watch when you're out without your hands free.

4.1 App Operation and Management

The SwitchBot app allows for comprehensive control and management of your Lock Pro and Fingerprint Authentication Pad.

Manage up to 100 fingerprints for various family members.
Monitor unlock/lock history to track who enters and exits your home.
Check the lock status remotely when paired with a SwitchBot Hub Mini (sold separately).

Video: SwitchBot Lock Pro & Fingerprint Authentication Pad. This video showcases the various unlocking methods, including fingerprint, password, and app control, highlighting the convenience and security features.

Video: Homelink App - Sesame 5Pro / Touch Pro Setup and Operation. This video provides a guide on how to set up and operate the Touch Pro (similar to Fingerprint Pad) using the Homelink app, including pairing and managing access.

5. Matengenezo

5.1 Maisha na Usimamizi wa Betri

The Lock Pro is equipped with a long-life battery, lasting 9 to 12 months. For enhanced reliability, a main/sub dual-system rechargeable battery (sold separately) can be used. If the main battery runs out, power is automatically supplied from the sub-battery, significantly reducing the chance of being locked out due to battery depletion.

5.2 Kusafisha na Ulinzi

The Fingerprint Authentication Pad is made of high-quality, soft silicone material, offering strong elasticity and resilience. It is easy to clean; simply wipe away dirt or water stains to restore its new condition.

Video: Vinffy Fingerprint Authentication Pad Protection Case. This video demonstrates the durability and easy cleaning of the fingerprint pad's silicone case, showing how it withstands dirt and water.

6. Utatuzi wa shida

If you encounter issues with your SwitchBot Lock Pro or Fingerprint Authentication Pad, please refer to the following common problems and solutions:

Fingerprint Recognition Errors: Ensure your finger is clean and dry. Re-registering your fingerprint or adding multiple scans of the same finger can improve accuracy.
Bluetooth Connection Instability: Ensure your smartphone is within range. If issues persist, consider using a SwitchBot Hub to connect via Wi-Fi for a more stable connection.
Lock Mechanism Feels Heavy: This might indicate a compatibility issue with your door type. Ensure the Lock Pro is installed correctly and aligned with the thumb turn.
Rapid Battery Depletion: Incorrect installation or misalignment can increase the load on the motor, leading to faster battery drain. Recheck installation alignment.

For further assistance, please contact SwitchBot customer support.

7. Vipimo

Kipengele	Maelezo
Chapa	SwitchBot
Mfano	Funga Pro
Itifaki ya Muunganisho	Bluetooth
Kipengele Maalum	Utambuzi wa alama za vidole
Vipengee vilivyojumuishwa	Mounting Plate, Screws, User Manual
Jina la Mfano	1 Door 2 Locks

8. Udhamini na Msaada

Kwa taarifa za udhamini na huduma kwa wateja, tafadhali rejelea SwitchBot rasmi website or contact their customer service directly. Details can typically be found in the packaging or on the product's dedicated support page online.

	Mwongozo wa Mtumiaji wa Kinanda cha SwitchBot Mwongozo wa kina wa mtumiaji wa Maono ya Kitufe cha SwitchBot, usanidi unaofunika, usakinishaji, matumizi, utatuzi wa matatizo, na vipimo. Jifunze jinsi ya kusakinisha na kutumia Vision ya Kinanda kwa ufikiaji salama kwa Kufuli za SwitchBot kupitia vitufe, utambuzi wa uso, alama za vidole na kadi za NFC.
	SwitchBot Lock Pro (Matter) Gebruikershandleiding - Installatie en Gebruik Pata maelezo zaidi kuhusu SwitchBot Lock Pro, ikiwa ni pamoja na maelekezo ya usakinishaji, utendakazi, maelezo mahususi, utatuzi wa matatizo na maelezo ya dhamana. Compatibel alikutana na Matter.
	Mwongozo wa Mtumiaji wa SwitchBot Bot: Mwongozo wa Kisukuma cha Kitufe Mahiri Mwongozo wa kina wa mtumiaji wa SwitchBot Bot, maelezo ya kuweka mipangilio, usakinishaji, njia za uendeshaji, amri za sauti, muunganisho, vipimo, usalama na maelezo ya dhima ya kifaa hiki mahiri cha uendeshaji kiotomatiki.
	Mwongozo wa Mtumiaji wa Kinanda cha SwitchBot Mwongozo wa mtumiaji wa Dira ya Kinanda ya SwitchBot, unaoelezea bidhaa zaidiview, vipengele, usakinishaji, na tahadhari za matumizi.
	Mwongozo wa Mtumiaji wa Kinanda cha SwitchBot Mwongozo wa mtumiaji wa Dira ya Kinanda ya SwitchBot, unaoelezea bidhaa zaidiview, yaliyomo kwenye kifurushi, usakinishaji, matumizi, na utatuzi wa matatizo.
	Mwongozo wa Mtumiaji wa Kinanda cha SwitchBot Mwongozo kamili wa mtumiaji wa Maono ya Kinanda cha SwitchBot, unaohusu bidhaaview, usakinishaji, usanidi, matumizi, utatuzi wa matatizo, na vipimo vya kiufundi. Jifunze jinsi ya kuoanisha, kuchaji, na kutumia kibodi kwa ufikiaji salama.