1. Utangulizi
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.
Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.
2. Taarifa za Usalama
Fuata tahadhari zifuatazo za usalama ili kuzuia uharibifu wa bidhaa au jeraha kwako mwenyewe:
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Handle internal components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
- Weka kisanduku mbali na maji, unyevu, na halijoto kali.
- Hakikisha uingizaji hewa sahihi ili kuzuia overheating.
- Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
- Weka sehemu ndogo na skrubu mbali na watoto.
3. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:
- GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
- Sanduku la Nyongeza (iliyo na skrubu, viunga vya kebo na sehemu zingine ndogo)
- Mwongozo wa Mtumiaji (hati hii)
- Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)
4. Kitambulisho cha Sehemu
Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:
Kielelezo 2: Mbele view of the case, highlighting the tempered glass panel.
Kielelezo cha 3: Nyuma view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.
Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.
Vipengele Muhimu:
- Paneli za Kioo chenye hasira: Front and side panels for component visibility.
- Bandari za I/O: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
- Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
- Viwanja vya Hifadhi: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
- Nafasi za Upanuzi: For graphics cards and other PCIe devices.
5. Mwongozo wa Kuweka
Follow these steps for proper installation of your PC components:
5.1. Kutayarisha Kesi
- Weka kesi kwenye uso wa gorofa, imara.
- Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.
Figure 5: Removing the tempered glass side panel using the clasp mechanism.
5.2. Ufungaji wa Motherboard
- Sakinisha ngao ya I/O (ikiwa haijaunganishwa kwenye ubao mama wako) kwenye sehemu ya nyuma ya kisahani.
- Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
- Funga ubao mama kwa kutumia skrubu zinazofaa kutoka kwenye kisanduku cha nyongeza.
5.3. Ufungaji wa Kitengo cha Ugavi wa Nguvu (PSU).
- Locate the PSU mounting area, typically at the rear bottom of the case.
- Slide the PSU into position and secure it with screws from the rear of the case.
5.4. Usakinishaji wa Hifadhi ya Hifadhi
- For 3.5" HDDs: Install into the designated HDD cage.
- For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
- Secure drives with screws.
5.5. Graphics Card (VGA) and Expansion Card Installation
- Ondoa vifuniko muhimu vya nafasi ya upanuzi kutoka nyuma ya kesi.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
- Salama kadi na screws.
5.6. Ufungaji wa Fan na Radiator
Kesi hiyo inasaidia usanidi anuwai wa shabiki na radiator:
- Juu: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
- Upande: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
- Chini: Up to 3 x 120mm or 2 x 140mm fans.
- Nyuma: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.
Figure 6: Cooling support diagram for fan and radiator placement.
5.7. Usimamizi wa Cable
Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.
6. Uendeshaji
6.1. Kuwasha
After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.
6.2. Udhibiti wa Taa wa ARGB
The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.
7. Matengenezo
7.1. Kusafisha
- Regularly clean dust filters to maintain optimal airflow.
- Use a soft, dry cloth to wipe down exterior surfaces.
- For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.
7.2. Matengenezo ya Mashabiki
Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.
8. Utatuzi wa shida
Sehemu hii inashughulikia masuala ya kawaida ambayo unaweza kukutana nayo:
| Suala | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Mfumo hauwashi | Loose power cables, faulty PSU, incorrect front panel connections. | Check all power connections (PSU to wall, PSU to motherboard/components). Verify front panel header connections to the motherboard. Test PSU if possible. |
| ARGB fans not lighting up | ARGB cables disconnected, incorrect ARGB header connection, faulty fan/controller. | Ensure ARGB cables are securely connected to the controller or motherboard's 5V 3-pin ARGB header. Use the LED switch button. Check motherboard software. |
| Poor airflow/high temperatures | Dust buildup, incorrect fan orientation, insufficient fans. | Clean dust filters and fans. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if needed. |
| Side panel difficult to close | Cables obstructing, components not fully seated. | Re-route cables for better management. Ensure all components are fully seated and not protruding. |
9. Maelezo ya kiufundi
Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:
Kielelezo 7: Zaidiview of key technical specifications.
| Kipengele | Vipimo |
|---|---|
| Aina ya Kesi | Micro-Tower |
| Msaada wa ubao wa mama | Micro-ATX, Mini-ITX |
| Vipimo (LxWxH) | 42 x 29 x 36.5 cm |
| Uzito wa Kipengee | 5 kg |
| I/O Bandari | 1x USB Type-C, 1x USB 2.0, HD Audio, 1x LED Switch Button |
| Hifadhi Bays | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Mashabiki waliosakinishwa awali | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Usaidizi wa Mashabiki (Upeo wa Juu) | Top: 3x120mm/2x140mm, Side: 2x120mm/2x140mm, Bottom: 3x120mm/2x140mm, Rear: 1x120mm/1x140mm |
| Radiator Support (Max) | Top: 360mm/280mm, Side: 240mm, Rear: 120mm |
| Upeo wa Urefu wa baridi wa CPU | 165 mm |
| VGA Length Limit | 400 mm |
| Kikomo cha Urefu wa PSU | 160 mm |
| Usawazishaji wa RGB | 5V 3-Pini Inayoweza Kushughulikiwa na Kichwa |
10. Udhamini na Msaada
For warranty information and technical support, please refer to the official GAMDIAS webtovuti au wasiliana na mchuuzi wako wa karibu. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.
Mtengenezaji: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
Mwagizaji (India): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700
