1. Utangulizi
This manual provides detailed instructions for the GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro, Model GL-C-008P(MIX). This device allows for smart control of RGB, warm white, and cold white LED strips, offering extensive color and brightness adjustments through a compatible ZigBee hub.
Kumbuka Muhimu: Tuya Zigbee hubs currently block third-party devices. GLEDOPTO ZigBee products are not compatible with Tuya hubs at this time. Please consider this before purchase if you intend to use a Tuya hub.
2. Bidhaa za Bidhaa
- ZigBee 3.0 Protocol: Utilizes advanced ZigBee 3.0 for fast, stable, and energy-efficient wireless communication.
- RGBCCT Mixing: Combines RGB color and tunable white light (2700K-6500K) for a wide range of lighting possibilities.
- Utangamano mpana: Works with Hub Bridge, Homey, Alexa, SmartThings, and other standard ZigBee hubs.
- Voice & App Control: Supports voice commands (e.g., Amazon Alexa) and smartphone app control for convenient adjustments.
- Muundo wa Kudumu: Constructed from flame-retardant PC material.
- Voltage Msaada: Compatible with 12V, 24V, 36V, 48V, and 54V analog LED strips.
3. Bidhaa Imeishaview na Vipimo
Picha ya 3.1: Mbele view of the GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro. This image displays the input and output terminals, model number (GL-C-008P(MIX)), input voltage range (DC12-24-36-48-54V), output current per channel (5A Max), total output current (10A Max), operating temperature (-20 to +60°C), and common anode/constant voltage type. It also shows the wire preparation guide and reset button location.
3.1. Maelezo ya kiufundi
Picha ya 3.2: Detailed product parameters for the GLEDOPTO ZigBee 3.0 RGBCCT LED Controller Pro. This image lists the product name, model number (GL-C-008P(MIX)), input voltage (DC12-24-36-48-54V), size (89x23.5x48mm), net weight (54.8g), operating temperature (-20°C to 60°C), output current (5A Max), total output current (10A Max), protection rate (IP20), and gross weight (67.2g).
| Kigezo | Thamani |
|---|---|
| Nambari ya Mfano | GL-C-008P(MIX) |
| Uingizaji Voltage | DC 12V-24V-36V-48V-54V |
| Pato la Sasa/Chaneli | 5A Max |
| Jumla ya Pato la Sasa | 10A Max |
| Joto la Uendeshaji | -20°C hadi +60°C |
| Kiwango cha Ulinzi | IP20 |
| Vipimo | 89mm x 23.5mm x 48mm |
| Aina ya Muunganisho | Common Anode / Constant Voltage |
| Itifaki isiyo na waya | ZigBee 3.0 |
4. Kuweka na Kuweka
4.1. Wiring the LED Strip Controller
Ensure all power is disconnected before proceeding with wiring. The controller uses a press-type design for secure wire connections.
Picha ya 4.1: Illustration of the press-type wiring design. To connect wires, press down on the orange tab with a small screwdriver or similar tool, insert the stripped wire (9-10mm length, 0.33-2.08mm² cross-section), and release the tab to secure the connection.
- Andaa waya: Strip approximately 9-10mm of insulation from the ends of your LED strip wires and power supply wires. The recommended wire cross-section is 0.33-2.08mm².
- Unganisha Ukanda wa LED: Connect the R, G, B, C, W, and V+ wires from your RGBCCT LED strip to the corresponding output terminals on the controller. Ensure correct polarity for V+.
- Unganisha Ugavi wa Nishati: Connect the positive (V+) and negative (V-) wires from your DC power supply to the INPUT terminals on the controller. Observe correct polarity.
4.2. Uchaguzi wa Ugavi wa Nguvu
The controller supports a wide range of input voltages. Select an appropriate power supply that matches the voltage requirements of your LED strip.
Picha ya 4.2: Voltage compatibility chart for the GLEDOPTO LED controller. It shows that for 12V and 24V LED strips, the total maximum current is 10A. For 36V, it's 7.5A; for 48V, 5.6A; and for 54V, 5A. Always match the power supply voltage to the LED strip voltage.
- For a 12V LED strip, use a 12V power supply.
- For a 24V LED strip, use a 24V power supply.
- Ensure the power supply's total current output meets or exceeds the total current draw of your LED strip, considering the controller's 10A maximum total output.
4.3. Pairing with a ZigBee Hub
After wiring and powering on the controller, it needs to be paired with a compatible ZigBee hub.
- Washa: Connect the power supply to the controller and LED strip. The LED strip should briefly light up.
- Initiate Pairing on Hub: Open your ZigBee hub's application (e.g., SmartThings, Homey, Philips Hue) and initiate the device discovery or pairing mode.
- Reset Controller (if needed): If the controller does not automatically appear, press and hold the "Reset" button on the controller for approximately 5 seconds until the connected LED strip flashes, indicating it has entered pairing mode.
- Thibitisha Kuoanisha: Once discovered by your hub, follow the on-screen instructions in the hub's app to complete the pairing process.
5. Maagizo ya Uendeshaji
5.1. App Control (Color and White Light Mixing)
Once paired with your ZigBee hub, you can control the LED strip using the hub's smartphone application.
Picha ya 5.1: Demonstration of RGB+White Light Mix control via a smartphone app. When the color selector is moved towards the edge of the color wheel, only the RGB light turns on. When moved towards the center, both RGB and white light turn on together, allowing for richer, mixed colors.
- Uchaguzi wa Rangi: Use the color wheel in your app to select from millions of colors.
- White Light Adjustment: Adjust the color temperature of the white light from warm white (2700K) to cold white (6500K).
- Udhibiti wa Mwangaza: Dim or brighten the LED strip to your desired level.
- RGB + CCT Mixing: The controller allows for seamless mixing of RGB colors with tunable white light. Moving the color selector towards the center of the color wheel typically activates both RGB and white LEDs for a broader spectrum of hues and improved color rendering.
Picha ya 5.2: Mzeeample of a room illuminated with 16 million colors controlled by the smartphone app. The image highlights the extensive color customization available, allowing users to create various ambiances.
5.2. Voice Control (e.g., Amazon Alexa)
If your ZigBee hub is integrated with a voice assistant like Amazon Alexa, you can control your LED strip using voice commands.
Picha ya 5.3: Illustration of voice control functionality with Amazon Echo Plus. Examples of commands include "Alexa, turn on the bedroom light," "Alexa, set to warm white," and "Alexa, increase to 70%."
- Ensure your ZigBee hub is linked to your Amazon Alexa account.
- Tumia amri kama vile:
- "Alexa, turn on [Light Name]."
- "Alexa, turn off [Light Name]."
- "Alexa, set [Light Name] to [Color]."
- "Alexa, set [Light Name] to warm white."
- "Alexa, dim [Light Name] to 50%."
- "Alexa, brighten [Light Name]."
6. Utangamano
The GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro is designed for broad compatibility with various ZigBee 3.0 gateways.
Picha ya 6.1: Compatibility chart for ZigBee 3.0 gateways. It indicates compatibility with Homey, Conbee, SmartThings, Philips Hue, and Amazon Echo Plus for RGB, CCT, Brightness, and Mix functionalities. Note the specific warning regarding Tuya hubs.
Compatible Gateways:
- Nyumbani
- Conbee
- Mambo ya Smart
- Philips Hue
- Amazon Echo Plus / Studio
- Other standard ZigBee 3.0 hubs
Important Compatibility Alert: As of the latest information, Tuya Zigbee hubs have implemented restrictions that prevent third-party devices, including GLEDOPTO products, from connecting. If you use a Tuya hub, this controller will not be compatible.
7. Matengenezo
The GLEDOPTO LED Strip Controller Pro requires minimal maintenance.
- Kusafisha: Gently wipe the controller with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Mazingira: Ensure the controller is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity. The IP20 rating indicates it is not protected against water.
- Sasisho za Firmware: Periodically check your ZigBee hub's application for any available firmware updates for connected devices, including the GLEDOPTO controller.
8. Utatuzi wa shida
| Tatizo | Sababu / Suluhisho linalowezekana |
|---|---|
| Kamba ya LED haiwaki. |
|
| Controller cannot be paired with ZigBee hub. |
|
| Colors are incorrect or white light is not working. |
|
| Udhibiti wa sauti haujibu. |
|
9. Taarifa za Usalama
- Tenganisha umeme kila wakati kabla ya kusakinisha au kukarabati.
- This device is for indoor use only (IP20 rating). Do not expose to water or high humidity.
- Hakikisha ugavi wa umeme ujazotage matches the LED strip voltage and is within the controller's specified input range.
- Do not exceed the maximum total output current of 10A.
- Weka mbali na watoto.
- Do not attempt to disassemble or modify the controller. This will void any warranty.
10. Udhamini na Msaada
GLEDOPTO products typically come with a standard manufacturer's warranty. Please refer to the product packaging or the official GLEDOPTO webtovuti kwa sheria na masharti maalum ya udhamini.
For technical support, troubleshooting assistance, or warranty claims, please contact GLEDOPTO customer service through their official channels or the retailer from whom you purchased the product.
Rasilimali za Mtandaoni: For additional information, FAQs, and community support, visit the official GLEDOPTO website or relevant smart home forums.
