1. Taarifa Muhimu za Usalama
Read all instructions before operating the BEZGAR LH-X72SPRO RC Airplane. Failure to follow these instructions may result in injury or damage to the product. This product is recommended for ages 8 and up.
- Always operate in open, clear areas, away from people, animals, and obstacles.
- Do not fly near power lines, buildings, or roads.
- Weka vidole, nywele na nguo zisizo huru mbali na propela zinazozunguka.
- Usimamizi wa watu wazima unapendekezwa kwa watumiaji walio chini ya umri wa miaka 14.
- Usibadilishe bidhaa kwa njia yoyote.
- Hakikisha betri zimechajiwa kwa usahihi na kwa usalama.
2. Yaliyomo kwenye Kifurushi
Thibitisha kuwa bidhaa zote zilizoorodheshwa hapa chini zimejumuishwa kwenye kifurushi chako:
- RC Airplane x 1
- Kidhibiti cha Mbali cha Ishara x 1
- Standard Remote Control x 1
- 3.7V 500mAh Battery x 2
- Kebo ya Kuchaji x 1
- Bisibisi x 1
- Fan Blade (Spare Propellers) x 4
- Mwongozo wa Mtumiaji x 1
Image 2.1: Contents of the BEZGAR LH-X72SPRO RC Airplane package, including the airplane, gesture controller, standard controller, batteries, charging cable, screwdriver, and spare propellers.
3. Mwongozo wa Kuweka
3.1 Ufungaji na Kuchaji Betri
The BEZGAR LH-X72SPRO RC Airplane uses two 3.7V 500mAh modular batteries for extended flight time. Ensure both batteries are fully charged before first use.
- Insert the provided 3.7V 500mAh batteries into the designated battery compartments on the RC airplane.
- Connect the charging cable to the battery and a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light on the charging cable will show the charging status. Refer to the charging cable's specific instructions for light indications (usually red for charging, off or green for fully charged).
- Charging typically takes approximately 60-90 minutes per battery.
Image 3.1: The dual modular battery system, providing up to 14 minutes of flight time.
3.2 Controller Pairing and Gyroscope Calibration
Before each flight, the controller and airplane must be paired and the gyroscope calibrated for stable operation.
- Place the RC airplane on a flat, horizontal surface.
- Turn on the power switch on the RC airplane. The LED lights will begin to flash.
- Turn on the power switch on your chosen remote control (either standard or gesture controller).
- For the gesture controller, long press the frequency pairing button (usually the power button) until the lights on the controller and airplane become solid, indicating successful pairing.
- Perform gyroscope calibration: Ensure the airplane is still on a horizontal surface. On the gesture controller, short press the Gyroscope Calibration button (refer to controller diagram in the video for exact location). The airplane's lights will flash rapidly and then become solid, indicating successful calibration.
- Short press the unlock button on the gesture controller to prepare for flight.
Video 3.2: Demonstrates how to use the gesture control, including pairing and calibration steps. This video shows the process of turning on the airplane and controller, pairing them, calibrating the gyroscope, and unlocking the motors for flight.
Image 3.3: The gesture control remote, illustrating how hand movements steer the airplane and perform stunts.
4. Maagizo ya Uendeshaji
4.1 Basic Flight Controls (Gesture Controller)
The gesture controller allows intuitive control of the airplane through hand movements.
- One-Click Take-off/Landing: After unlocking, press the designated button on the controller for automatic take-off or landing.
- Kushikilia Altitude: The airplane features automatic altitude hold technology, maintaining a consistent height for stable hovering.
- Go Up/Down: Move your hand up or down to control the airplane's vertical ascent or descent.
- Advance/Back: Tilt your hand forward or backward to move the airplane in the corresponding direction.
- Kuruka Kushoto/Kulia: Tilt your hand left or right to move the airplane sideways.
- Pinduka Kushoto/Kulia: Rotate your wrist left or right to make the airplane turn.
Image 4.1: The airplane maintaining a stable hover, illustrating the altitude holding system.
Vipengele 4.2 vya Juu
- 360° Flip & Aerial Stunts: Engage the tumble button on the controller and perform a quick hand movement to execute 360-degree flips and other aerial maneuvers.
- Hali isiyo na kichwa: In headless mode, the airplane's orientation is relative to the remote controller, simplifying flight control regardless of the airplane's front direction.
- Chaguzi 3 za kasi: The airplane offers three adjustable speed settings to adapt to various flight scenarios and pilot skill levels.
- Kuacha Dharura: In case of an emergency, long press the designated button on the remote controller to immediately stop the propellers.
Image 4.2: The RC airplane executing a 360-degree flip, showcasing its aerial stunt capabilities.
4.3 LED Navigation Lights
The BEZGAR LH-X72SPRO RC Airplane is equipped with colorful LED navigation lights, enhancing visibility and adding to the flying experience, especially in low-light conditions.
Video 4.3: A demonstration of the RC airplane's LED lights during flight, highlighting their brightness and visibility.
Video 4.4: Mwishoview of the BEZGAR RC Airplane in action, showcasing its flight capabilities and LED lights.
4.4 Low Battery Warning System
The airplane is equipped with a low battery warning system. When the battery level is low, the LED lights on the airplane will flash rapidly, indicating that it's time to land and recharge the battery. This ensures safe operation and prevents unexpected power loss during flight.
5. Matengenezo
Proper maintenance ensures the longevity and optimal performance of your RC airplane.
- Kusafisha: Gently wipe the airplane with a dry, soft cloth after each use to remove dust and debris. Avoid using water or chemical cleaners.
- Ukaguzi wa Propeller: Regularly check the propellers for any damage (cracks, bends). Replace damaged propellers immediately using the provided spare fan blades and screwdriver.
- Utunzaji wa Betri:
- Tumia kebo ya kuchaji ya asili kila wakati.
- Usichaji zaidi au kutokeza betri kupita kiasi.
- Hifadhi betri mahali pa baridi, kavu mbali na jua moja kwa moja na joto.
- If not used for an extended period, charge the batteries to about 50% before storage.
- Hifadhi: Store the airplane and its components in a safe, dry place, away from extreme temperatures and direct sunlight.
6. Utatuzi wa shida
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Airplane does not respond to controller. | Not paired correctly; low battery in controller or airplane. | Re-pair the controller and airplane. Ensure both have sufficient battery charge. |
| Airplane flies erratically or is unstable. | Gyroscope not calibrated; damaged propellers; strong wind conditions. | Perform gyroscope calibration on a flat surface. Check and replace any damaged propellers. Fly in calm conditions. |
| Muda mfupi wa ndege. | Battery not fully charged; old battery; continuous high-speed flight. | Ensure batteries are fully charged. Consider replacing old batteries. Optimize flight style. |
| LED lights flashing rapidly. | Onyo la betri ya chini. | Land the airplane immediately and recharge the battery. |
7. Vipimo
- Nambari ya Mfano: LH-X72SPRO
- Chapa: BEZGAR
- Vipimo vya Bidhaa: Inchi 12 x 8.7 x 2.8
- Uzito wa Kipengee: Pauni 1.06
- Umri Unaopendekezwa na Mtengenezaji: Miaka 8 na kuendelea
- Betri: 3.7V 500mAh (x2)
- Marudio ya Kudhibiti: 2.4GHZ
- Aina ya Magari: Hollow Cup Motor
Image 7.1: The RC airplane highlighting its 2.4GHz radio system for stable, long-distance remote control.
8. Udhamini na Msaada
For warranty information or technical support, please contact BEZGAR customer service directly. Details can typically be found on the product packaging or the official BEZGAR webtovuti.
Kwa usaidizi wa ziada, unaweza kutembelea BEZGAR Store on Amazon.
