Utangulizi
This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix CETO Basic High Airflow PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
The BitFenix CETO Basic is designed for high airflow and features panoramic tempered glass, three pre-installed Infinity Mirroring ARGB fans (two reverse, one positive), and extensive compatibility for modern PC components.
Yaliyomo kwenye Kifurushi
Thibitisha kwamba vipengele vyote vipo kabla ya kuendelea na usakinishaji:
- BitFenix CETO Basic PC Gaming Case
- 3 x 120mm Infinity Mirroring ARGB Fans (2x Reverse, 1x Positive)
- 1 x 8+8 Pin ARGB/Fan Controller
- Sanduku la Vifaa (skrubu, vifungo vya zipu, vizuizi vya kusimama, n.k.)
- Mwongozo wa Mtumiaji (hati hii)
Kielelezo cha 1: Included components, showing the PC case, three 120mm ARGB fans, and the 8+8 pin controller for fan and lighting management.
Vipimo
| Kipengele | Maelezo |
|---|---|
| Jina la Mfano | BitFenix CETO Basic High Airflow PC Gaming Case White |
| Nambari ya Mfano | BFC-CET-200-WWGSW-3A |
| Aina ya Kesi | Mnara wa kati |
| Msaada wa ubao wa mama | ATX, Micro ATX, Mini ITX |
| Mashabiki waliosakinishwa awali | 3 x 120mm Infinity Mirroring ARGB (2x Reverse, 1x Positive) |
| Usaidizi wa Radi (Juu) | 360mm / 280mm / 240mm (thickness up to 27mm) |
| Usaidizi wa Radi (Nyuma) | 120 mm |
| Uondoaji wa GPU | Hadi 390 mm |
| Urefu wa baridi wa CPU | Hadi 165 mm |
| Urefu wa PSU | Up to 200mm (Bottom Mount) |
| Hifadhi Bays | 3.5" Drive Bay: 2+1, 2.5" Drive Bay: 2+1 |
| Nafasi ya Usimamizi wa Cable | 20 mm |
| Paneli ya I/O | 1 x Type-C, 2 x USB 3.0, LED/Reset Button, Power Button |
| Vichujio vya Vumbi | Magnetic (Top, Bottom, Right Steel Panel) |
| Vipimo (L x W x H) | 424mm x 215mm x 486mm |
| Uzito | 6 kg |
Kielelezo cha 2: External dimensions and internal component layout overview.
Kielelezo cha 3: Detailed internal clearances for CPU coolers, graphics cards, and cable management.
Kuweka na Kuweka
1. Kutayarisha Kesi
Carefully remove the case from its packaging. Place it on a stable, flat surface. The tempered glass side panel can be removed for easier access during component installation. The case features snap-on panels for tool-free removal.
Kielelezo cha 4: Removing the side panel. Always handle tempered glass with care, using both hands.
2. Ufungaji wa Motherboard
Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, or Mini-ITX). Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield opening. Secure the motherboard with screws.
3. Ufungaji wa Kitengo cha Ugavi wa Nguvu (PSU).
The BitFenix CETO Basic supports ATX power supplies up to 200mm in length, mounted at the bottom of the case. Slide the PSU into its designated bay and secure it with screws from the rear of the case.
4. Ufungaji wa Kifaa cha Hifadhi
The case supports 2+1 3.5" drive bays and 2+1 2.5" drive bays. Install your HDDs and SSDs into the appropriate trays or mounting points and secure them.
Kielelezo cha 5: Storage drive bay locations and PSU mounting area.
5. Ufungaji wa Kadi ya Michoro (GPU).
The case accommodates GPUs up to 390mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the retention mechanism or screws.
6. Usakinishaji wa Mfumo wa Kupoeza (Feni na Radiata)
The case comes with three 120mm Infinity Mirroring ARGB fans pre-installed for enhanced airflow. The top panel supports radiators up to 360mm/280mm/240mm (max thickness 27mm), and the rear supports a 120mm radiator.
Kielelezo cha 6: Radiator and fan mounting options within the case.
7. Usimamizi wa Cable
Utilize the 20mm cable management space behind the motherboard tray to route and secure cables. This improves airflow and aesthetics. Connect all necessary power cables from the PSU to your components and the front panel I/O cables to your motherboard.
The pre-installed ARGB fans connect to the included 8+8 Pin controller. Connect this controller to your power supply via SATA and to your motherboard's ARGB header (if available) for software control, or use the case's LED/Reset button for manual control.
Operating the Case Features
Paneli ya I/O ya mbele
Paneli ya mbele ya I/O hutoa ufikiaji rahisi wa bandari na vidhibiti muhimu:
- 1 x Type-C Port: For modern USB-C devices.
- 2 x USB 3.0 Bandari: Kwa vifaa vya USB vya kasi ya juu.
- LED/Reset Button: Controls ARGB lighting modes or functions as a system reset button depending on motherboard connection.
- Kitufe cha Nguvu: Ili kuwasha/kuzima mfumo wako.
Kielelezo cha 7: Front I/O panel layout and dust filter locations.
Udhibiti wa Taa za ARGB
The pre-installed Infinity Mirroring ARGB fans offer striking visual effects. Control their lighting via the included 8+8 Pin controller. If your motherboard supports ARGB synchronization (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Biostar RGB Sync), connect the controller to the motherboard's 3-pin ARGB header to manage lighting through software. Otherwise, use the case's LED/Reset button to cycle through pre-set lighting modes.
Kielelezo cha 8: The BitFenix CETO Basic case with its illuminated ARGB fans, highlighting the aesthetic design.
Kielelezo cha 9: Airflow optimization within the case, demonstrating the path of cool air intake and hot air exhaust for efficient cooling.
Matengenezo
Kusafisha Kichujio cha Vumbi
The BitFenix CETO Basic case is equipped with magnetic dust filters on the top, bottom, and right steel panel. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system.
- Gently remove the magnetic dust filters from their respective locations.
- Clean the filters using compressed air, a soft brush, or by rinsing with water (ensure they are completely dry before reattaching).
- Reattach the magnetic filters to the case.
Kielelezo cha 10: Locations of removable magnetic dust filters for easy maintenance.
Usafishaji wa Jumla
Futa sehemu ya nje ya kesi kwa kutumia laini, damp kitambaa. Epuka kutumia kemikali kali au vifaa vya kukwaruza ambavyo vinaweza kuharibu umaliziaji au kioo kilichopozwa.
Kutatua matatizo
Mfumo Hauwaki
- Hakikisha ugavi wa umeme umeunganishwa ipasavyo kwenye plagi ya ukutani na swichi ya PSU iko katika nafasi ya 'WASHA'.
- Thibitisha kwamba kebo ya umeme ya ATX yenye pini 24 na kebo ya umeme ya CPU zimeunganishwa salama kwenye ubao mama.
- Hakikisha kebo ya swichi ya umeme ya paneli ya mbele imeunganishwa kwa usahihi kwenye kichwa cha mbele cha paneli ya ubao mama. Rejelea mwongozo wa ubao mama wako kwa pinout sahihi.
Fans Not Spinning or ARGB Not Lighting Up
- Ensure the 8+8 Pin ARGB/Fan controller is receiving power via its SATA power connector from the PSU.
- Verify that the fans are correctly connected to the controller.
- If using motherboard software control, ensure the controller's ARGB cable is connected to the motherboard's 3-pin ARGB header and the software is installed and configured correctly.
- If using the case's LED/Reset button for control, ensure the button's cable is connected to the controller.
Poor Airflow or High Temperatures
- Clean the magnetic dust filters regularly as described in the Maintenance section.
- Ensure all fans are spinning in the correct direction for optimal airflow (intake from front/bottom, exhaust from top/rear). The BitFenix CETO Basic includes both positive and reverse fans for optimized airflow.
- Check for proper cable management to avoid obstructing airflow paths.
- Verify that CPU cooler and GPU fans are functioning correctly.
Udhamini na Msaada
For warranty information and technical support, please refer to the official BitFenix webtovuti au wasiliana na mchuuzi wako wa karibu. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.
Mtengenezaji: BITFENIX
Mfano: BFC-CET-200-WWGSW-3A
Webtovuti: www.bitfenix.com
