ALONEFIRE H60

ALONEFIRE H60 LED Flashlight User Manual

Mfano: H60

1. Zaidiview na Yaliyomo kwenye Kifurushi

The ALONEFIRE H60 is a high-performance, rechargeable LED flashlight designed for various applications including camping, emergency situations, hiking, and home use. It features multiple lighting modes, a durable aluminum alloy body, and convenient USB-C charging.

Yaliyomo kwenye Kifurushi:

  • ALONEFIRE H60 LED Flashlight
  • Rechargeable Lithium-Ion Battery (pre-installed or separate)
  • Kebo ya Kuchaji ya USB-C
  • Lanyard
  • Pocket Clip (may be pre-attached)
ALONEFIRE H60 LED Flashlight with USB-C cable and lanyard

Image 1.1: The ALONEFIRE H60 LED Flashlight shown with its included USB-C charging cable and lanyard.

2. Kuweka

2.1 Ufungaji wa Betri

If the battery is not pre-installed, unscrew the tail cap of the flashlight. Insert the provided rechargeable Lithium-Ion battery with the positive (+) end facing towards the flashlight head. Screw the tail cap back on securely.

2.2 Kuchaji Awali

Kabla ya matumizi ya kwanza, chaji tochi kikamilifu. Rejelea sehemu ya 'Kuchaji' kwa maagizo ya kina.

2.3 Kuunganisha Lanyard

Thread the thin loop of the lanyard through the small hole on the tail cap of the flashlight. Pass the larger end of the lanyard through the loop and pull to secure it. This helps prevent accidental drops.

Hand holding ALONEFIRE H60 flashlight with lanyard attached

Image 2.1: A hand demonstrating how to hold the ALONEFIRE H60 flashlight with the lanyard attached for secure carrying.

2.4 Attaching the Pocket Clip

The detachable pocket clip can be slid onto the flashlight body to allow for easy carrying on a belt, pocket, or backpack strap. Ensure it is firmly seated in the groove on the flashlight body.

Images showing the ALONEFIRE H60 flashlight with a detachable back clip, carried in a pocket and attached to a backpack

Image 2.2: The detachable back clip allows for convenient carrying in a pocket or attached to a backpack.

3. Uendeshaji

3.1 Washa/Zima

  • Kuwasha: Press the side power button once.
  • Kuzima: Press and hold the side power button for approximately 1 second.

3.2 Kubadilisha Hali za Taa

With the flashlight on, press the side power button repeatedly to cycle through the 6 available lighting modes in the following order:

  1. Mwanga dhaifu
  2. Mwanga wa Chini
  3. Mwanga wa kati
  4. Mwanga wa Juu
  5. Extreme Bright Light (Ultra Bright)
  6. Strobe
Graphic illustrating the 6 lighting modes of the ALONEFIRE H60 flashlight: Weak, Low, Medium, High, Ultra Bright, and Strobe

Image 3.1: Visual representation of the six distinct lighting modes available on the ALONEFIRE H60 flashlight.

3.3 Uanzishaji wa Hali ya Strobe

From any lighting mode, quickly double-click the side power button to activate Strobe mode. Press the button once more to return to the previous mode.

3.4 Automatic Brightness Adjustment

To prevent overheating and protect the LED, the two brightest modes (High Light and Extreme Bright Light) will automatically dim to a lower setting after a short period of continuous use (typically less than 1 minute for Extreme Bright). This is a normal function to ensure product longevity and safety.

3.5 Magnetic Tail Feature

The ALONEFIRE H60 features a powerful magnet integrated into its tail cap. This allows the flashlight to be securely attached to ferrous metal surfaces, providing hands-free illumination. This is useful for tasks requiring both hands, such as vehicle maintenance or working in dark spaces.

ALONEFIRE H60 flashlight attached to a metal surface using its tail magnet, with an inset showing the tail magnet and side metal pen clip

Image 3.2: The strong tail magnet allows the flashlight to adhere to metal surfaces, providing hands-free lighting.

4. Kuchaji

4.1 bandari ya kuchaji ya USB-C

The ALONEFIRE H60 is equipped with a USB-C charging port for convenient recharging. To access the charging port, twist the upper ring of the flashlight head to expose the port. This design helps protect the port from dust and water when not in use.

4.2 Mchakato wa Kuchaji

  1. Twist the upper ring of the flashlight head to reveal the USB-C port.
  2. Unganisha kebo ya USB-C iliyotolewa kwenye mlango wa tochi.
  3. Unganisha ncha nyingine ya kebo ya USB-C kwenye chanzo cha umeme kinachooana cha USB (km, adapta ya ukutani, lango la USB la kompyuta, benki ya umeme).
  4. Nuru ya kiashirio cha kuchaji itaangazia ili kuonyesha hali ya kuchaji.
  5. Once charging is complete, disconnect the cable and twist the upper ring back to cover the port.

4.3 Kiashiria cha Kuchaji

  • Nuru Nyekundu: Indicates the flashlight is currently charging.
  • Mwanga wa Bluu: Indicates the flashlight is fully charged.

Charging time typically ranges from 2 to 4 hours, depending on the power source and remaining battery level.

ALONEFIRE H60 flashlight connected to a USB-C charging cable, showing red and blue indicator lights for charging status

Image 4.1: The ALONEFIRE H60 flashlight during USB-C charging, illustrating the red (charging) and blue (fully charged) indicator lights.

5. Matengenezo

5.1 Kusafisha

Futa mwili wa tochi kwa laini, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the anodized aluminum finish. Keep the lens clean for optimal light output.

5.2 Utunzaji wa Betri

  • To prolong battery life, avoid completely draining the battery. Recharge the flashlight when the light becomes noticeably dim.
  • If storing the flashlight for an extended period, charge the battery to approximately 50% and recharge every 3-6 months to prevent over-discharge and battery damage.
  • Use only the specified Lithium-Ion battery.

5.3 O-Ring Lubrication

Periodically inspect the O-rings (seals) on the tail cap and charging port area. If they appear dry or cracked, apply a thin layer of silicone grease to maintain the flashlight's waterproof rating.

6. Utatuzi wa shida

  • Tochi haiwashi:
    • Ensure the battery is correctly installed with the positive (+) end facing the head.
    • Check if the battery is charged. Connect to a charger and observe the indicator light.
    • Hakikisha kofia ya mkia imeimarishwa kikamilifu. Kofia ya mkia iliyolegea inaweza kuzuia mawasiliano ya umeme.
  • Light dims unexpectedly:
    • This is a normal function for the High and Extreme Bright modes to prevent overheating. The flashlight will automatically reduce output to a sustainable level.
    • Betri inaweza kuwa chini. Chaji upya tochi.
  • Flashlight gets hot during use:
    • It is normal for the flashlight head to become warm, especially on higher brightness settings, due to heat dissipation from the LED. Avoid touching the head directly when operating on the brightest modes for extended periods.
  • Charging indicator light does not change:
    • Ensure the USB-C cable is fully inserted into both the flashlight and the power source.
    • Jaribu kebo tofauti ya USB-C au adapta ya umeme.
    • Verify the charging port on the flashlight is clean and free of debris.

7. Vipimo

MfanoH60
Chanzo cha NuruLED ya SST40
MwangazaHadi Lumens za 1800
Njia za taa6 (Weak, Low, Medium, High, Extreme Bright, Strobe)
Umbali wa Juu wa BoritiHadi mita 272
Chanzo cha Nguvu1x Lithium-Ion Battery (included)
Kuchaji BandariUSB-C
Muda wa KuchajiSaa 2-4
Maisha ya BetriMasaa 2-10 (kulingana na hali)
NyenzoAlumini ya Anodized
Upinzani wa MajiKuzuia maji
Uzito wa KipengeeKilo 0.16 (wakia 5.6)
VipimoInchi 6.34 x 2.32 x 1.73 (kadirio)
Vipengele MaalumAdjustable Light Modes, High Lumens, Long Range, Rechargeable, Strong Tail Magnet

8. Udhamini na Msaada

8.1 Taarifa ya Udhamini

Specific warranty details for your ALONEFIRE H60 flashlight are typically provided with your purchase documentation or can be found on the official ALONEFIRE webtovuti. Tafadhali hifadhi uthibitisho wako wa ununuzi kwa madai ya udhamini.

8.2 Usaidizi kwa Wateja

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ALONEFIRE customer support through their official webtovuti au muuzaji ambapo bidhaa ilinunuliwa.

Nyaraka Zinazohusiana - H60

Kablaview Alonefire H002 Mwongozo wa Mtumiaji wa Tochi ya LED
Mwongozo wa mtumiaji wa Tochi ya Alonefire H002 LED, maudhui ya kifurushi kinachofunika, usakinishaji wa betri, utendakazi na maagizo ya kuchaji. Inajumuisha maelezo ya kina ya maandishi ya picha na alama.
Kablaview Alonefire SV003 UV Tochi Mwongozo wa Mtumiaji
Mwongozo wa mtumiaji wa Tochi ya Alonefire SV003 UV, kueleza yaliyomo kwenye kifurushi, usakinishaji wa betri, maagizo ya matumizi na taratibu za kuchaji.
Kablaview Mwongozo wa Mtumiaji wa Mfululizo wa Mfululizo wa Huidun H60 | Mwongozo wa Ufungaji na Usanidi
Comprehensive user manual for the Huidun H60 Series Mini PC (model 2BMHA-H60). Provides detailed instructions for quick installation, VESA mounting, system setup, Wi-Fi connection, BIOS settings, and important precautions. Includes FCC compliance information.
Kablaview AETEK Outdoor PRO L2 PoE Switch Quick Installation Guide - H60/H60-DC Series
Quick installation guide for AETEK's Outdoor PRO L2 PoE Switches (H60/H60-DC series). Covers model specifications, package contents, important installation notes, port descriptions, LED indicators, default settings, connection diagrams, and cable gland assembly.