Mwongozo wa Mtumiaji wa EXFO V1 Kisafishaji cha Fiber Optic Kiotomatiki Kikamilifu

1. Utangulizi

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the EXFO V1 Fully Automatic Fiber Optic Cleaver. The V1 cleaver is designed for precise, one-step fiber cutting, featuring an automatic knife return mechanism to enhance work efficiency. Its robust metal design ensures stable performance and durability.

The device is compatible with various fiber types, including leather wire, bare fiber, and jumper cables, when used with appropriate fixtures. Its compact and lightweight design makes it highly portable for field use.

2. Taarifa za Usalama

Always handle optical fibers with extreme care. Fiber shards are very sharp and can cause serious injury.
Wear appropriate personal protective equipment (PPE), including safety glasses, when working with fiber optic cables and cleavers.
Dispose of fiber shards properly in a designated fiber waste container. Do not use standard trash receptacles.
Keep the cleaver clean and free from dust and debris to ensure optimal performance and longevity.
Do not attempt to disassemble or repair the cleaver beyond the scope of this manual. Refer to qualified service personnel for repairs.
Weka mbali na watoto.

3. Yaliyomo kwenye Kifurushi

Verify that all items are present and undamaged upon unpacking.

1 x EXFO V1 Fully Automatic Fiber Optic Cleaver
1 x Kipochi cha kubeba Kinga
Hex wrenches (for maintenance/adjustment)
Mwongozo wa Mtumiaji (hati hii)

EXFO V1 Fiber Optic Cleaver with accessories and carrying case

Kielelezo cha 3.1: EXFO V1 Fiber Optic Cleaver, protective carrying case, and included hex wrenches.

4. Maelezo ya kiufundi

Kipengele	Vipimo
Mfano	V1
Aina	Fiber moja
Kipenyo cha Kufunika	125µm
Cleaved Length (Coating diameter ≤ 250µm)	5mm ~ 20mm
Cleaved Length (Coating diameter > 250µm)	10mm ~ 20mm
Kebo ya Fiber Inayotumika	Single Fiber: 250 µm to 900 µm and drop cable
Pembe ya Kawaida Iliyopasuka	0.5 °
Typical Blade Life	Total 60,000 fiber cleaves (2,500 cleaves per each point, total 24 points)
Vipimo (W x D x H)	mm 90.7 x 72.5 mm x 45.8 mm (inchi 3.57 x 2.85 x 1.80)
Uzito	Gramu 220 (pauni 0.48)
Nyenzo ya Blade	Imported Tungsten Steel

Kielelezo cha 4.1: Mbele view of the EXFO V1 Fiber Optic Cleaver, showing the fiber input and cleaving mechanism.

5. Kuweka

Unpack the Cleaver: Carefully remove the EXFO V1 Fiber Optic Cleaver from its protective carrying case.
Chunguza Uharibifu: Before use, visually inspect the cleaver for any signs of damage that may have occurred during shipping. Do not use if damaged.
Tayarisha eneo la kazi: Ensure your work area is clean, well-lit, and free from obstructions. Place a fiber waste container nearby.
Stabilize the Cleaver: The cleaver features anti-slip foot pads on the bottom. Place it on a stable, flat surface to prevent movement during operation.

EXFO V1 Fiber Optic Cleaver inside its protective case

Kielelezo cha 5.1: The EXFO V1 Fiber Optic Cleaver securely stored within its protective carrying case.

6. Maagizo ya Uendeshaji

The EXFO V1 is a fully automatic, one-step fiber cleaver designed for ease of use and precision.

Prepare the Fiber: Strip the fiber optic cable to the required length, removing the outer jacket and buffer coating. Clean the bare fiber using an approved fiber cleaning solution and lint-free wipes.
Open the Cleaver: Gently lift the top cover of the cleaver to expose the fiber clamping and cleaving mechanism.
Position the Fiber: Place the prepared fiber into the designated fiber holder or fixture on the cleaver. Ensure the fiber is straight and positioned correctly according to the desired cleave length (refer to the scale markings if available). The cleaver supports single fibers from 250 µm to 900 µm and drop cables.
Secure the Fiber: Funga cl ya nyuziamp to gently secure the fiber in place. Ensure it is held firmly without excessive pressure.
Perform the Cleave: Press down firmly and smoothly on the top cover of the cleaver. The automatic mechanism will engage, performing a precise one-step cleave and returning the knife to its home position.
Remove the Fiber: Carefully open the top cover and remove the cleaved fiber. Inspect the cleave quality.
Dispose of Waste: Collect the cleaved fiber scrap and dispose of it immediately in a proper fiber waste container.

Karibu-up view of the EXFO V1 Fiber Optic Cleaver showing the fiber holder

Kielelezo cha 6.1: Close-up of the EXFO V1 cleaver's fiber holder, illustrating where the fiber is placed for cleaving.

7. Matengenezo

Kusafisha: Regularly clean the cleaver, especially the blade and fiber clamping areas, using a lint-free cloth and isopropyl alcohol. Ensure no fiber debris accumulates.
Mzunguko wa Blade: The imported tungsten steel blade has a typical lifespan of 60,000 cleaves, distributed across 24 points (2,500 cleaves per point). When cleave quality degrades, rotate the blade to a fresh cutting point. The blade is marked with a scale to facilitate this process. Use the provided hex wrench for adjustment.
Uingizwaji wa Blade: After all 24 points have been used, the blade will need to be replaced. Contact your supplier for genuine replacement blades and instructions.
Hifadhi: When not in use, store the cleaver in its protective carrying case to prevent damage and contamination.

Mwenye pembe view of the EXFO V1 Fiber Optic Cleaver, highlighting its compact design

Kielelezo cha 7.1: The EXFO V1 cleaver, showcasing its robust and compact design, ideal for field maintenance.

8. Utatuzi wa shida

Poor Cleave Quality:
- Ensure the fiber is clean and properly stripped.
- Verify the fiber is correctly positioned in the cleaver's fixture.
- Rotate the blade to a new cutting point if the current point is worn.
- If the blade is fully utilized, replace it.
- Check for any debris on the cleaver's cutting surface or fiber clamps.
Fiber Not Cutting:
- Confirm the cleaver mechanism is fully engaged by pressing down firmly.
- Check if the blade is dull or broken. Rotate or replace the blade as necessary.
- Ensure the fiber is correctly seated and clampmh.
Cleaver Mechanism Sticking:
- Clean the cleaver thoroughly to remove any accumulated dust or fiber particles.
- Ensure no foreign objects are obstructing the mechanism.

9. Udhamini na Msaada

For warranty information, technical support, or service inquiries, please contact your authorized EXFO distributor or reseller. Please have your product model (V1) and purchase details available when contacting support.

	Uchunguzi wa EXFO FIP-500 Fiber Inspection: AI-Powered, Jaribio la Kiotomatiki Gundua EXFO FIP-500, uchunguzi wa nyuzi unaoendeshwa na AI kwa majaribio ya kiotomatiki ya moja, nyuzi nyingi na viunganishi viwili. Fikia matokeo ya kuaminika kwa kutumia sifuri-guso, ukaguzi wa haraka wa MPO, na vipengele vya juu kwa usimamizi bora wa nyuzi.
	FIP-500 Fiber Inspection Scope Mwongozo wa Mtumiaji - EXFO Mwongozo wa kina wa mtumiaji wa Upeo wa Ukaguzi wa Fiber wa EXFO FIP-500, unaoeleza kwa kina vipengele vyake, uendeshaji, matengenezo na utatuzi wa matatizo. Pata maelezo kuhusu uwezo wake wa hadubini wa video unaobebeka, kiolesura cha skrini ya kugusa, chaguo za muunganisho na EXFO Basecamp ushirikiano.
	MaxTester 730D PON/metro OTDR: Suluhisho la Upimaji wa Fiber Optic Karatasi kamili ya data ya EXFO MaxTester 730D PON/metro OTDR, ikielezea vipengele vyake, programu, vipimo vya kiufundi, huduma za programu, na vifaa vya usanidi na utatuzi wa utatuzi wa nyuzi za FTTx/MDU.
	MaxTester 730D PON/Metro-OTDR: Suluhisho la Upimaji wa Fiber Optic kwa Mitandao ya FTTx na Metro Karatasi kamili ya data ya EXFO MaxTester 730D, OTDR ya mkononi iliyoundwa kwa ajili ya usakinishaji na utambuzi wa hitilafu wa mtandao wa FTTx, PON, na Metro. Inaangazia iOLM, muda mrefu wa matumizi ya betri, na uwezo wa hali ya juu wa majaribio.
	EXFO MaxTester 730D PON/metro OTDR - Spec Sheet Comprehensive specification sheet for the EXFO MaxTester 730D PON/metro OTDR, detailing its features, applications, technical specifications, and accessories for advanced fiber optic network testing and troubleshooting.
	Mwongozo wa Marejeleo ya Haraka wa EXFO AXS-120 mini-OTDR Mwongozo wa marejeleo wa haraka wa EXFO AXS-120 mini-OTDR, unaofafanua vipengele vyake, utendakazi, na uendeshaji wa majaribio ya mtandao wa macho.

EXFO V1