1. Utangulizi
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the TRU COMPONENTS Signal Pillar, model TC-12835336. This device is designed for industrial signaling applications, featuring red and green LED indicators with continuous or flashing light modes and an IP65 protection rating.
2. Taarifa za Usalama
- Soma maagizo yote kwa uangalifu kabla ya ufungaji na uendeshaji.
- Ufungaji unapaswa kufanywa tu na wafanyikazi waliohitimu.
- Hakikisha usambazaji wa umeme umekatika kabla ya kufanya usakinishaji, matengenezo, au utatuzi wowote.
- Thibitisha juzuu sahihitage (24V) is supplied to prevent damage to the unit.
- Do not expose the device to conditions beyond its specified IP65 rating.
- Epuka kukabiliwa moja kwa moja na mwanga wa LED kwa muda mrefu.
3. Bidhaa Imeishaview
The TRU COMPONENTS Signal Pillar TC-12835336 is a robust signaling device with two LED segments (red and green) for clear visual indication in various industrial environments.

Kielelezo cha 1: TRU COMPONENTS Signal Pillar TC-12835336. This image displays the signal pillar with its black base, threaded mounting shaft, and two translucent LED segments: red on top and green below. A bundle of multi-colored wires extends from the base for electrical connection.
Vipengele:
- Sehemu za LED: Red and Green, providing visual status.
- Makazi: Durable black housing with a diameter of 55 mm.
- Ufungaji wa nyuzi: Kwa ajili ya usakinishaji salama.
- Kuunganisha Wiring: Multi-colored wires for power and control connections.
4. Vipimo
| Kipengele | Maelezo |
|---|---|
| Nambari ya Mfano | Mama-12835336 |
| Rangi za Mwanga | Nyekundu, Kijani |
| Njia za taa | Continuous or Flashing |
| Kipenyo | Ø 55 mm |
| Ukadiriaji wa Ulinzi | IP65 |
| Voltage | 24V |
| Mtengenezaji | VIPENGELE VYA TRU |
| Nchi ya Asili | China |
5. Kuweka na Kuweka
- Kukatwa kwa Nguvu: Ensure all power to the installation area is disconnected before beginning.
- Kupachika: Securely mount the signal pillar using its threaded base. Ensure the mounting surface is stable and capable of supporting the device.
- Wiring: Connect the signal pillar's wires to the appropriate 24V power supply and control system. Refer to the wiring diagram (if provided separately with the product) for specific connections for continuous or flashing modes. Typically, different wires control each LED segment and the flashing function.
- Environmental Seal: Ensure the IP65 rating is maintained after installation by properly sealing all connections and mounting points, especially in environments where dust or water ingress is a concern.
- Muunganisho wa Nishati: Once all connections are secure and verified, restore power to the system.
6. Maagizo ya Uendeshaji
The TRU COMPONENTS Signal Pillar operates by receiving a 24V signal to illuminate its LED segments. The specific wiring configuration determines whether a segment illuminates continuously or flashes.
- Mwangaza unaoendelea: Apply 24V to the designated wire for the desired LED segment (e.g., red or green) to achieve continuous illumination.
- Flashing Lighting: If wired for flashing operation, applying 24V to the corresponding wire will activate the flashing mode for that LED segment. Consult your system's wiring diagram for specific control signals.
- Multiple Segments: Both red and green segments can be activated independently or simultaneously, depending on the control system's design.
7. Matengenezo
The TRU COMPONENTS Signal Pillar is designed for low maintenance. Regular checks can ensure optimal performance.
- Kusafisha: Periodically clean the exterior of the signal pillar with a soft, damp kitambaa. Usitumie visafishaji vya abrasive au vimumunyisho.
- Ukaguzi: Regularly inspect the housing and wiring for any signs of damage, wear, or loose connections.
- Tiba Uadilifu: For IP65 rated protection, ensure all seals and cable glands remain intact and properly tightened.
- Kukatwa kwa Nguvu: Ondoa umeme kila wakati kabla ya kufanya matengenezo yoyote.
8. Utatuzi wa shida
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Signal pillar does not illuminate. | No power supply; incorrect wiring; faulty LED segment. | Check 24V power supply; verify wiring connections against diagram; if power and wiring are correct, the LED segment may require replacement. |
| LED segment illuminates continuously instead of flashing (or vice-versa). | Incorrect wiring for flashing/continuous mode. | Review wiring diagram and ensure correct connections for the desired operating mode. |
| Operesheni ya mara kwa mara. | Loose wiring connection; unstable power supply. | Inspect all wiring connections for tightness; check power supply stability. |
Ikiwa hatua za utatuzi wa matatizo hazitatui tatizo, wasiliana na huduma kwa wateja au fundi aliyehitimu.
9. Udhamini na Msaada
For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact TRU COMPONENTS customer service. Keep your purchase receipt as proof of purchase.
Manufacturer: TRU COMPONENTS





