1. Utangulizi
The Sygonix SY-6421352 RFID Code Keypad is a robust and secure access control solution designed for various environments, including corporate buildings, leisure facilities, and smart homes. It offers flexible access methods via PIN, RFID card, or a combination of both. With an IP66 weather-resistant die-cast zinc housing and illuminated keys, it ensures reliable operation even in challenging conditions.
2. Taarifa za Usalama
- Soma maagizo yote kwa uangalifu kabla ya ufungaji na matumizi.
- Ensure proper power supply (12V DC/AC, 24V DC/AC) to avoid damage.
- Installation should be performed by qualified personnel to prevent electrical hazards.
- Do not expose the device to extreme temperatures or corrosive substances.
- Regularly check for signs of wear or damage. Disconnect power before any maintenance.
3. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:
- Sygonix SY-6421352 RFID Code Keypad
- Kibandiko cha kupachika
- 4x screws
- 4x plugs za ukuta
- Screw ya kichwa cha hexagonal
- Ufunguo
- Kuunganisha waya
- Diodi 2 x
- 2x Piezo resistors
- Mwongozo wa Mtumiaji
4. Vipimo
| Kipengele | Vipimo |
|---|---|
| Mbinu za Ufikiaji | PIN / Card / PIN + Card |
| Uwezo wa Mtumiaji | Hadi watumiaji 1010 |
| Matokeo ya Kupunguza | 2 |
| Mzunguko wa RFID | EM125 kHz |
| Nyenzo | Zinki ya kufa |
| Ukadiriaji wa Ulinzi wa Ingress (IP). | IP66 (inastahimili hali ya hewa) |
| Aina ya Kuonyesha | LED |
| Kibodi | Imeangaziwa |
| Voltage | 12V DC/AC, 24V DC/AC |
| Uzito | gramu 400 |
5. Ufungaji
5.1 Unpacking and Component Overview
Carefully remove the keypad and all accessories from the packaging. Familiarize yourself with the keypad's front and back, noting the wiring harness connection point.
5.2 Mchoro wa Wiring
Video ifuatayo inatoa maelezo ya kinaview of the wiring connections for the access control system, including the keypad, lock, power supply, exit button, proximity card reader, and doorbell. Ensure all connections are secure and follow local electrical codes.
6. Maagizo ya Uendeshaji
6.1 Kufungua Mlango
The keypad supports various unlocking methods: card only, PIN only, or a combination of card and PIN. The following video illustrates these methods.
6.2 Adding User Settings
To grant access, you need to add user cards or PINs to the system. The video below explains the process for adding new users.
6.3 Deleting User Settings
If a user's access needs to be revoked, their card or PIN can be removed from the system. The following video details the steps for deleting user settings.
7. Matengenezo
- Kusafisha: Tumia laini, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents.
- Ukaguzi: Periodically check the wiring for any signs of damage or loose connections.
- Firmware: Angalia mtengenezaji webtovuti kwa masasisho yoyote ya programu dhibiti yanayopatikana.
- Ulinzi wa Mazingira: The IP66 rating ensures protection against dust and strong jets of water. However, avoid prolonged submersion or exposure to extreme weather conditions beyond its rating.
8. Utatuzi wa shida
- Kibodi haifanyi kazi: Check power supply connections. Ensure the unit is receiving adequate power.
- Card not recognized: Ensure the RFID card is correctly presented to the reader. Verify the card is properly registered in the system.
- PIN haifanyi kazi: Double-check the entered PIN. Ensure the PIN is correctly registered and the user mode allows PIN access.
- Mlango haufunguki: Verify the lock mechanism is functioning correctly. Check wiring between the keypad, power supply, and lock. Ensure the correct access method (card/PIN) is being used.
- System beeps continuously: Refer to the specific beep codes in the full manual for diagnostic information. This may indicate an error or an open circuit.
9. Udhamini na Msaada
This Sygonix SY-6421352 RFID Code Keypad comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
