Mwongozo wa Mtumiaji wa Kengele ya Mlango ya Daytech DA10 Friji na Friji

1. Utangulizi

The Daytech DA10 Freezer and Refrigerator Door Alarm is designed to alert users when a refrigerator or freezer door has been left open for an extended period. This device helps prevent food spoilage and unnecessary energy consumption by providing timely audible notifications. It features adjustable delay settings, multiple alarm modes, and customizable volume levels to suit various environments and needs.

2. Bidhaa za Bidhaa

Delayed Alert: Configurable delay times of 1, 2, 3, or 4 minutes before the alarm activates.
Dual Ringing Modes: Choose between CHIME mode for a gentle reminder or ALARM mode for a loud alert.
Kiasi Kinachoweza Kurekebishwa: Five volume levels, ranging from 0 dB (silent) to 120 dB, allowing customization for different noise environments.
Onyo la Betri ya Chini: The alarm provides a shorter beep duration when batteries are low, indicating it's time for replacement.
Shut-otomatiki: If the door remains open, the alarm will stop after 30 minutes of continuous activation to conserve battery life.
Programu Inayotumika Mbalimbali: Suitable for refrigerators, freezers, garage doors, shed doors, windows, cabinets, and other entry points.

Daytech Freezer Door Alarm features including delayed alert, 5 volume levels, chime, alarm, and multi-delay modes.

Kielelezo 1: Zaidiview of Daytech Freezer Door Alarm features.

3. Yaliyomo kwenye Kifurushi

Tafadhali angalia kifurushi ili kuhakikisha kuwa bidhaa zote zipo:

Main Alarm Unit (1x)
Ukanda wa Sumaku (1x)
Betri za AAA (2x)
Double-sided Adhesive Tape (2x sets)
Vipimo vya Kuweka (2x)
Mwongozo wa Mtumiaji (1x)

Video ya 1: Kufungua na kuzidishaview of the Daytech Freezer Door Alarm contents.

4. Kuweka na Kuweka

4.1 Ufungaji wa Betri

Open the battery compartment cover on the back of the main alarm unit.
Ingiza betri mbili za AAA, hakikisha polarity sahihi (+/-).
Funga kifuniko cha sehemu ya betri kwa usalama.

4.2 Kuweka Kengele

The alarm can be mounted using either the provided adhesive tape or screws.

Clean the surface where the alarm will be installed to ensure it is dry and free of dust or grease.
Attach the double-sided adhesive tape to the back of both the main alarm unit and the magnetic strip. Alternatively, use the provided screws for a more permanent installation.
Position the main alarm unit on the door frame or the fixed part of the appliance.
Position the magnetic strip on the moving part of the door, ensuring that the triangle marks on both the main unit and the magnetic strip are aligned.
The distance between the main unit and the magnetic strip must be less than or equal to 0.98 inches (2.5 cm) wakati mlango umefungwa.

Diagram showing how to install the Daytech Freezer Door Alarm using adhesive tape, aligning triangle markers, and maintaining a distance of less than 0.98 inches.

Figure 2: Step-by-step installation guide for the alarm.

Visual instructions for installing the Daytech door alarm and replacing its batteries.

Figure 3: Installation and battery replacement visuals.

5. Maagizo ya Uendeshaji

5.1 Washa/Zima na Uteuzi wa Modi

Use the 'CHIME/ALARM/OFF' switch on the side of the main unit to select the desired mode:

CHIME: The alarm will emit a chime sound when triggered.
ALAMU: The alarm will emit a loud siren sound when triggered.
BONYEZA: Kengele imezimwa.

5.2 Setting Delay Time (1-4 Minutes)

Press the 'SET' key on the side of the main unit to cycle through the four delay modes. Each press will confirm the mode with a specific number of beeps:

Mode 1 (1 beep): Alert after 1 minute, beeps every 15 seconds for 5 seconds until the door closes. (Recommended for refrigerators, basement doors).
Mode 2 (2 beeps): Alert after 2 minutes, beeps every 10 seconds for 10 seconds until the door closes. (Recommended for garages, shed doors).
Mode 3 (3 beeps): Alert after 3 minutes, beeps every 5 seconds for 15 seconds until the door closes. (Recommended for windows, cabinet doors).
Mode 4 (4 beeps): Alert after 4 minutes, beeps every 20 seconds for 15 seconds until the door closes. (Recommended for offices, shop doors).

Diagram illustrating the four delay modes (1, 2, 3, 4 minutes) and their corresponding alert patterns for the Daytech Freezer Door Alarm.

Figure 4: Four selectable delay modes and their alert patterns.

Video 2: Demonstration of setting the delay modes on the Daytech Freezer Door Alarm.

5.3 Kurekebisha Kiasi

Use the volume buttons (+/-) on the side of the main unit to adjust the alarm's loudness. There are 5 levels available, from 0 dB (silent) to 120 dB (maximum loudness).

Video 3: Guide to adjusting the volume levels of the Daytech Freezer Door Alarm.

6. Matengenezo

6.1 Kusafisha

Wipe the alarm unit and magnetic strip with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

6.2 Ubadilishaji wa Betri

When the low battery warning is activated (shorter beeps), replace the two AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 4.1.

7. Utatuzi wa shida

Tatizo	Sababu inayowezekana	Suluhisho
Kengele haisikiki.	1. Batteries are dead or incorrectly installed. 2. Alarm is in 'OFF' mode. 3. Magnetic strip is too far from the main unit.	1. Replace batteries and check polarity. 2. Switch to 'CHIME' or 'ALARM' mode. 3. Adjust placement to ensure distance is ≤ 0.98 inches (2.5 cm).
Alarm sounds too frequently.	Delay time is too short.	Increase the delay time using the 'SET' key (Mode 2, 3, or 4).
Alarm is too quiet/loud.	Volume level is not set correctly.	Adjust the volume using the +/- buttons.
Low battery warning persists after replacement.	Incorrect battery type or faulty batteries.	Ensure new, alkaline AAA batteries are used. Try a different set of batteries.

8. Vipimo

Mfano: DA10
Vipimo: Inchi 2.52 x 1.34 x 4.57
Uzito wa Kipengee: 3.98 wakia
Chanzo cha Nguvu: Betri 2 x AAA (zimejumuishwa)
Aina ya Kiini cha Betri: Alkali
Mbinu ya Kudhibiti: Gusa
Kiwango cha Kelele: Desibeli 0-120
Aina ya Kupachika: Wall Mount (Adhesive/Screws)
Masafa ya Juu ya Kihisi: Inchi 0.98 (sentimita 2.5)

9. Udhamini na Msaada

Daytech products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or contact Daytech customer support. If you encounter any issues or have questions regarding your Daytech DA10 Freezer and Refrigerator Door Alarm, please visit the official Daytech webtovuti au wasiliana na timu yetu ya huduma kwa wateja kwa usaidizi.

Maelezo ya Mawasiliano:
Please refer to the official Daytech webtovuti au kifungashio cha bidhaa kwa maelezo ya mawasiliano ya kisasa zaidi.

	Mwongozo na Mwongozo wa Mtumiaji wa Kijikaratasi cha Mkono Kinachotumia Waya Mwongozo huu wa mtumiaji hutoa maagizo na vipimo vya kina vya Kipokezi/Paja la Mkono wa Kinachotumia Waya/Paja, unaohusu usanidi, uendeshaji, utatuzi wa matatizo, na maelezo ya kiufundi kwa modeli ya SW06.
	Maagizo ya Uendeshaji wa Pager yenye kazi nyingi na Mwongozo wa Mtumiaji Mwongozo wa kina wa mtumiaji wa Multifunctional Pager, unaoelezea kwa undani mwonekano wake, taratibu za kuwasha, kuoanisha na kitufe cha SOS, muunganisho wa programu ya simu (Tuya Smart/Smart Life), uendeshaji wa programu ikijumuisha mipangilio ya kengele na udhibiti wa kifaa, mwongozo wa usakinishaji, vipimo, utatuzi wa Maswali na Majibu, na maelezo ya huduma baada ya mauzo.
	WT07-US Maelekezo ya Uendeshaji wa Redio ya Njia Mbili Maagizo ya uendeshaji ya WT07-US redio ya njia mbili, inayoshughulikia uendeshaji msingi, vitendaji muhimu, matamshi ya sauti, maonyo ya betri ya chini, na vipengele vya kina kama vile VOX na Scrambler/Compandor.
	Mwongozo wa Mtumiaji wa Daytech Wireless Chime/Pager - INST-EN-CC01-T-20230214 Mwongozo wa kina wa mtumiaji wa Daytech Wireless Chime/Pager (INST-EN-CC01-T-20230214), unaojumuisha vipengele, vipimo, usakinishaji, uendeshaji, utatuzi wa matatizo na matengenezo.
	Mwongozo wa Mtumiaji wa King'ora cha Nje Kisichotumia Waya - Daytech Electronics Mwongozo wa mtumiaji wa Daytech Wireless Outdoor King'ora cha Daytech chenye sauti na flash ya 120dB. Kinajumuisha maagizo ya usanidi, mwongozo wa kuoanisha, na vipimo vya kiufundi.
	Mwongozo wa Uendeshaji wa Transmitter ya BT-DB19 Mwongozo huu unatoa maagizo ya uendeshaji kwa Kisambazaji cha BT-DB19, ikijumuisha juu ya bidhaaview, vipengele, vipimo vya kiufundi, na uingizwaji wa betri.

Daytech DA10