Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply User Manual

1. Utangulizi

This manual provides essential information for the installation, operation, and maintenance of your new Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Vetroo 850W Power Supply (White)

2. Bidhaa za Bidhaa

• PCIe Gen 5.1 Ready: Meets the latest PCIE 5.1 standards for improved performance and efficiency. Backward compatible with both PCIE 4.0 and 3.0.
• Fully ATX 3.1 Compliant: Designed to meet the newest, most advanced power supply standards.
• Premium 105°C Capacitors: High-quality materials and construction ensure stable, low-temperature operation.
• Imethibitishwa kuwa na Dhahabu Zaidi ya 80: Meets high standards for quality and efficiency, ensuring reliable performance and energy savings.
• Muundo wa Msimu Kamili: Allows for easy cable management and customization, reducing cable clutter by only installing necessary cables.
• Operesheni ya utulivu: Features a 120mm FDB (Fluid Dynamic Bearing) fan for quiet cooling.

Kielelezo 2: Zaidiview of Vetroo 850W Power Supply features

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kwenye kifurushi:

• Vetroo 850W Power Supply Unit
• Modular Cable Set (including 24-pin ATX, CPU, PCIe, SATA, Molex, FDD connectors)
• Kamba ya Nguvu ya AC
• Kuweka Screws
• Mahusiano ya Usimamizi wa Cable
• Storage Bag for Unused Cables

Figure 3: Included Modular Cables

4. Taarifa za Usalama

WARNING: Improper installation or use can result in serious injury or damage to your system.

• Always disconnect the AC power cord from the wall outlet before installing or removing the power supply.
• Usifungue kitengo cha usambazaji wa nguvu. Kiwango cha juutagViungo vipo ndani, hata vinapokatika.
• Ensure all cables are securely plugged into their respective ports. Loose connections can cause damage.
• Use only the modular cables provided with this power supply. Third-party cables may not be compatible and could cause serious damage.
• Install the power supply in a well-ventilated area, away from high humidity and extreme temperatures.

5. Kuweka na Kuweka

Follow these general steps for installing your power supply. Refer to your PC case and motherboard manuals for specific instructions.

1. Tayarisha Mfumo Wako: Hakikisha kompyuta yako imezimwa na imeondolewa kwenye soketi ya ukutani.
2. Weka Ugavi wa Nguvu: Secure the power supply unit into the designated bay in your PC case using the provided mounting screws.
3. Unganisha Kebo Kuu za Umeme: Unganisha kebo ya ATX yenye pini 24 kwenye ubao wako wa mama.
4. Unganisha Kebo za Nguvu za CPU: Connect the 8-pin (4+4) CPU power cable(s) to your motherboard.
5. Unganisha Kebo za Nguvu za PCIe: Connect the necessary PCIe power cables (e.g., 12V-2x6 for PCIe 5.1 GPUs, or 8-pin (6+2) for older GPUs) to your graphics card(s).
   

   Figure 4: Dual PCIe 5.1 Connectors

6. Unganisha Kebo za Pembeni: Connect SATA, Molex, and FDD cables to your storage drives and other peripherals as needed.
7. Usimamizi wa Cable: Utilize the fully modular design and included cable ties to route cables neatly, improving airflow and aesthetics.
8. Ukaguzi wa Mwisho: Double-check all connections to ensure they are secure before closing your PC case.

6. Maagizo ya Uendeshaji

After successful installation, you can power on your system.

• Washa: Connect the AC power cord to the power supply and a wall outlet. Flip the main power switch on the power supply to the 'ON' position.
• Njia ya ECO: The power supply features an ECO mode switch. When 'ON', the fan will stop spinning unless the load is above approximately 50% of the rated capacity, ensuring silent operation at low loads. When 'OFF', the fan will spin continuously.

Figure 5: Power Switch and ECO Mode

7. Matengenezo

Matengenezo sahihi huhakikisha uimara na utendaji bora wa usambazaji wako wa umeme.

• Kusafisha: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the power supply is off and unplugged before cleaning.
• Uendeshaji wa Mashabiki: The 120mm Fluid Dynamic Bearing fan is designed for durability and quiet operation. In ECO mode, the fan may not spin at low loads; this is normal.

8. Utatuzi wa shida

Ukikumbana na matatizo na usambazaji wako wa umeme, fikiria yafuatayo:

• Hakuna Nguvu: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the main power switch on the power supply is in the 'ON' position. Check your wall outlet with another device.
• System Instability/Shutdowns: This power supply includes multiple protection features (OVP, OCP, OPP, SCP, UVP, OTP) to safeguard your components. If your system is unstable or shuts down unexpectedly, it could indicate an issue with power delivery or another component. Ensure all power connections are firm.
• Shabiki Asiyezunguka: If the ECO mode is enabled, the fan will not spin until the power supply reaches approximately 50% load. This is normal operation for quiet performance. If the fan does not spin under heavy load, contact support.
• Kelele zisizo za kawaida: If you hear unusual noises (e.g., coil whine, grinding), power down your system immediately and contact support.

9. Vipimo

10. Udhamini na Msaada

The Vetroo 850W Power Supply comes with a Udhamini wa Miaka 10, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any questions regarding your product, please visit the official Vetroo webtovuti au wasiliana na idara yao ya huduma kwa wateja.