Mwongozo wa Maelekezo ya Mchoraji wa Laser wa ATOMSTACK P9 M50

1. Utangulizi

The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.

2. Taarifa za Usalama

ONYO: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.

Ulinzi wa Macho: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
Kuacha Dharura: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
Uingizaji hewa: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
Usalama wa Nyenzo: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
Usimamizi: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
Watoto na Wanyama wa Kipenzi: Keep children and pets away from the operating area and the machine at all times.

Image showing the emergency stop button and power controls on the ATOMSTACK P9 M50.

Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kwenye kifurushi:

1 x ATOMSTACK P9 M50 Laser Engraving Machine
Parts for screw assembly (steps 2/3/4/5)
1 x Anti-dust cloth
1 x Tool set
1 x Fixed focus film
3 x Acrylic panels
3 x Wood chips
1 x msomaji wa kadi
5 x Vifungo vya kebo
1 x Accessory package
1 x Display assembly
1 x Display cable
1 x Adapta ya nguvu
1 x Kebo ya umeme
1 x Cable ya data
1 x Metal cutting support plate
1 x Mwongozo
1 x Laser assembly
1 x X-axis assembly
1 x Y-axis assembly
2 x Miguu ya usaidizi
4 x Mounting spacers

4. Mwongozo wa Kuweka

The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:

Kufungua: Carefully remove all components from the packaging and place them on a clean, stable surface.
Mkutano wa Frame: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
Usakinishaji wa Moduli ya Leza: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
Miguu ya Msaada: Attach the two support feet to the base of the machine for stability.
Control Terminal: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
Muunganisho wa Nishati: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
Muunganisho wa Data: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.

ATOMSTACK P9 M50 laser engraver fully assembled, showing the main unit, control panel, and work area.

Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.

Close-up of the ATOMSTACK P9 M50 independent control terminal, showing its magnetic connection and ergonomic design.

Figure 4.2: Independent Control Terminal connection.

5. Maagizo ya Uendeshaji

5.1 Usakinishaji na Muunganisho wa Programu

The ATOMSTACK P9 M50 is compatible with popular laser engraving software:

LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
LightBurn: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.

Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.

Image showing a laptop running LightBurn software connected to the ATOMSTACK P9 M50 laser engraver, illustrating multi-system support.

Figure 5.1: Software Compatibility and Connection.

5.2 Offline Engraving

The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.

Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
Hifadhi file to a TF card.
Insert the TF card into the slot on the control terminal.
Use the terminal's interface to select and start your engraving project.

Image of the ATOMSTACK P9 M50 independent control terminal displaying 'Start' button, indicating offline operation capability.

Figure 5.2: Independent Control Terminal for Offline Engraving.

5.3 Fixed Focus Laser

The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.

Diagram illustrating the fixed focus laser technology of ATOMSTACK P9 M50, showing a smaller, more precise laser spot compared to others.

Figure 5.3: Fixed Focus Laser Technology.

5.4 Nyenzo Zinazosaidiwa

The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:

Nyenzo za Kuchonga:

Mbao
Mwanzi
Kadibodi
Plastiki
Ngozi
PCB
Oksidi ya alumini
Non-reflective electroplated and painted metal
304 mirror stainless steel
Kioo
Kauri
Pamba
Slate

Nyenzo za kukata:

Kadibodi
Kitambaa kisicho na kusuka
Wood board (up to 15mm)
Acrylic (black, up to 15mm)
Some thin plastic sheets
Sifongo

Diagram illustrating the dual compression spot coupling technology, showing how it enables cutting of 15mm acrylic and 20mm wood.

Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.

6. Matengenezo

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:

Safisha Lenzi ya Leza: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
Clean the Work Area: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
Lubricate Sehemu za Kusonga: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
Kagua Cables: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.

7. Utatuzi wa shida

This section addresses common issues you might encounter with your ATOMSTACK P9 M50.

Tatizo	Sababu inayowezekana	Suluhisho
Mashine haiwashi	Kebo ya umeme imefunguka; adapta ya umeme imeharibika; sehemu ya dharura imekwama	Check all power connections; ensure the emergency stop button is disengaged (rotate to unlock). Test power adapter if possible.
Laser haina kurusha	Laser module not connected; software settings incorrect; material too reflective	Check laser module connection; verify software power settings (e.g., 100% power); ensure material is suitable for laser engraving/cutting.
Engraving is blurry or weak	Dirty laser lens; incorrect material settings; material not flat or properly positioned	Clean the laser lens; adjust power/speed settings in software for the specific material; ensure material is flat and secure on the work surface.
Mashine haiunganishi kwenye kompyuta	USB cable faulty; driver issues; incorrect port selection in software	Try a different USB cable or port; reinstall necessary drivers for the engraver; select the correct COM port in your engraving software.

8. Vipimo

Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:

Nguvu ya Mashine	50 W
Nguvu ya Macho ya Laser	10-11 W
Laser Wavelength	455 ± 5 sq m
Usahihi wa Kuchora	0.01 mm
Mbinu ya Kuzingatia	Mtazamo usiobadilika
Eneo la Kuchonga	220 x 250 mm
Uhamisho wa Data	USB connection / TF card
Programu ya Uendeshaji	LaserGRBL, LightBurn
Mfumo wa uendeshaji unaotumika	Win XP/7/8/10, Mac (LightBurn)
Imeungwa mkono File Miundo	NC, BMP, JPG, PNG, DXF
Ingizo la Nguvu	100-240 V AC, 50/60 Hz
Pato la Nguvu	12 V 5 A
Uzito Net	3.5 kg
Vyeti	CE, FCC, RoHS, FDA, PSE

Kielelezo cha 8.1: Vipimo vya bidhaa na vipimo muhimu.

9. Udhamini na Msaada

For warranty information and technical support, please refer to the official ATOMSTACK webtovuti au wasiliana na mchuuzi wako. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.

Rasilimali za Mtandaoni:

Visit the official ATOMSTACK store on Amazon: ATOMSTACK Official Store
For software support, visit the official webmaeneo ya LaserGRBL na LightBurn.

	Mwongozo wa Mtumiaji wa Kifaa cha Kusaidia Hewa cha ATOMSTACK Mwongozo wa mtumiaji wa Kiti cha Usaidizi wa Hewa cha ATOMSTACK, ukitoa usakinishaji, matumizi na tahadhari kwa mashine za kuchonga leza za ATOMSTACK.
	ATOMSTACK A5 Pro Laser Engraving Machine Manual Comprehensive user manual for the ATOMSTACK A5 Pro laser engraving machine, covering safety, software installation (LaserGRBL and LightBurn), operation, and troubleshooting.
	Mwongozo wa Mtumiaji na Mwongozo wa Usakinishaji wa ATOMSTACK MAKER R1 Rotary Chuck Mwongozo huu kamili unaelezea usakinishaji, muunganisho, na uendeshaji wa ATOMSTACK MAKER R1 Rotary Chuck kwa mashine za kuchonga kwa leza. Unashughulikia yaliyomo kwenye ufungashaji, taratibu za usanidi, usanidi wa programu kwa kutumia LightBurn, na maelezo muhimu ya kuchonga vitu vyenye umbo la silinda, duara, na vingine.
	Mwongozo wa Mtumiaji wa Kichoraji cha Laser cha ATOMSTACK A5/A10/A20 PRO V2 Mwongozo kamili wa mtumiaji wa wachoraji wa leza wa ATOMSTACK A5, A10, na A20 PRO V2, unaohusu usalama, maagizo ya usanidi, usanidi wa programu (LightBurn, LaserGRBL), uendeshaji, matengenezo, na utatuzi wa matatizo.
	Mwongozo wa Ufungaji wa Moduli ya Laser ya AtomStack M50 Mwongozo wa kina wa usakinishaji wa Moduli ya Laser ya AtomStack M50, unaoelezea tahadhari za usalama, kanusho, maelezo ya vipengele, hatua za usakinishaji na miongozo ya urekebishaji kwa vichonga leza.
	Mwongozo wa Mtumiaji wa APP ya AtomStack: Kuunganisha na Kuendesha Kichonga Chako cha Laser Mwongozo wa kina wa mtumiaji wa AtomStack APP, unaowaongoza watumiaji kupitia upakuaji wa programu, muunganisho wa kifaa, usanidi wa mtandao, maelezo ya utendaji, michakato ya uundaji na kuchonga, masasisho ya programu na programu dhibiti, kuunganisha kamera, kurekodi video, kudhibiti nenosiri na taratibu za kuweka upya kamera kwa vichonga leza ya AtomStack.

ATOMSTACK P9 M50