Miongozo+

HGLRC Rekon7 LR Pro Frame

Mwongozo wa Mtumiaji wa Kifaa cha Fremu cha HGLRC Rekon7 Long Range PRO HD O3

Model: Rekon7 LR Pro Frame | Brand: HGLRC

1. Utangulizi

This manual provides detailed instructions for the assembly, setup, and maintenance of your HGLRC Rekon7 Long Range PRO HD O3 Frame Kit. This frame is designed for 7-inch FPV racing drones, offering durability and compatibility for extended flight times.

Onyo la Usalama: Always ensure all components are securely fastened before flight. Incorrect assembly or loose parts can lead to equipment damage or injury. Disconnect power before performing any maintenance or assembly.

2. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vifuatavyo vimejumuishwa kwenye kifurushi chako:

3. Maagizo ya Mkutano

Follow these steps to assemble your Rekon7 LR Pro Frame Kit. Refer to the diagrams for visual guidance.

3.1 Base Frame Assembly

  1. Attach the 6mm front and rear arms to the 2mm base plate using the appropriate M3 screws and self-locking nuts. Ensure the arms are oriented correctly.
  2. Secure the 2mm rack protection boards to the arms.
  3. Install the 4mm Arm Reinforcement rods for added structural integrity.
Assembled HGLRC Rekon7 LR Pro Frame Kit

Kielelezo 1: Zaidiview of the assembled Rekon7 LR Pro Frame, showcasing the carbon fiber arms and central structure.

3.2 Central Stack and Camera Mount

  1. Mount the 2mm mid plate onto the base plate using the M3 aluminum columns.
  2. Attach the 2mm camera side panels to the front of the frame. These panels support 19x19mm or 20x20mm cameras.
Mbele view of HGLRC Rekon7 LR Pro Frame

Kielelezo 2: Mbele view of the frame, highlighting the camera mounting area and central stack.

3.3 Top Plate and TPU Mounts

  1. Install the 2mm top plate, securing it with the remaining M3 aluminum columns. The space between the top and middle plate is 20mm.
  2. Attach the various TPU mounts as needed: GoPro holder, GPS mount, antenna mounts (T-antenna, general antenna), buzzer mount, DJI Air unit blocks, and DJI O3 holder mount.
Upande view of HGLRC Rekon7 LR Pro Frame

Kielelezo 3: Upande view of the frame, showing the layered plate design and mounting points for electronics.

4. Ufungaji wa vipengele

This frame is designed for compatibility with various FPV drone components. Below are general guidelines for installing recommended parts.

4.1 Flight Controller (FC) and Electronic Speed Controller (ESC)

4.2 Motors

4.3 Camera and Video Transmitter (VTX)

4.4 Propellers and Battery

5. Matengenezo

Regular maintenance ensures the longevity and safe operation of your drone frame.

6. Utatuzi wa shida

This section addresses common issues related to the frame assembly.

7. Vipimo

Jina la BidhaaRekon7 LR Frame kit
ChapaHGLRC
Nyenzo3K Carbon fiber
Ainainchi 7
Msingi wa magurudumu324 mm
Ukubwa337*246mm
Unene wa Sahani ya Juu2 mm
Unene wa Sahani ya Chini2 mm
Middle Plate Thickness2 mm
Front Arm Thickness6 mm
Rear Arm Thickness6 mm
Frame Protection Bar Thickness2 mm
Camera Side Plate Thickness2 mm
Top and Middle Plate Space20 mm
Flight Controller Mounting Hole20x20 mm
Mlima wa Kamera19x19mm / 20x20mm
Motor Mounting Hole16x16mm / 19x19mm
Uzito wa KipengeeGramu 152 (takriban wakia 5.4)

8. Udhamini na Msaada

For warranty information, please refer to the terms and conditions provided by your retailer or contact HGLRC directly. Product support and additional resources may be available on the official HGLRC webtovuti au kupitia jukwaa lako la ununuzi.

You can visit the official HGLRC store for more information: HGLRC Store on Amazon

Nyaraka Zinazohusiana - Rekon7 LR Pro Frame

Kablaview Mwongozo wa Drone wa Mashindano ya HGLRC Sekta25CR Sub250g ya HD FPV
Mwongozo wa kina wa mtumiaji wa HGLRC Sector25CR Sub250g HD FPV Racing Drone, unaofunika vipimo vya bidhaa, usanidi, usanidi, na utatuzi wa matatizo.
Kablaview Mwongozo wa Drone wa Mashindano ya HGLRC Racewhoop30 FPV
Mwongozo wa kina wa mtumiaji wa HGLRC Racewhoop30 FPV Racing Drone, unaofafanua maelezo ya bidhaa, maelezo ya kiolesura, taratibu za usanidi, usanidi, utatuzi wa matatizo, na matengenezo.
Kablaview Sekta ya HGLRC 5 V3 VTX FPV Mwongozo wa Mashindano ya Drone
Mwongozo wa kina wa mtumiaji wa Sekta ya HGLRC 5 V3 VTX FPV Racing Drone. Inashughulikia usanidi, usanidi, vipimo, na utatuzi wa drone hii ya juu ya mbio.
Kablaview Mwongozo wa Usakinishaji wa Fremu ya Mashindano ya Ndege Isiyo na Rubani ya HGLRC Wind5 Lite V2 FPV
Mwongozo kamili wa usakinishaji wa fremu ya mbio za ndege zisizo na rubani za HGLRC Wind5 Lite V2 FPV, maelezo ya kina, sehemu zilizojumuishwa, vipimo, na hatua za usanidi.
Kablaview Mwongozo wa Mtumiaji wa HGLRC Petrel132 FPV Racing Drone 6S
Mwongozo kamili wa mtumiaji wa HGLRC Petrel132 FPV Racing Drone 6S, unaoelezea maelezo ya bidhaa, maelezo ya kiolesura, taratibu za usanidi, mipangilio ya usanidi, na miongozo ya utatuzi wa matatizo.
Kablaview Mwongozo wa Mpokeaji wa HGLRC ELRS 2.4 RX-T
Mwongozo huu unatoa maelezo ya kina kuhusu kipokezi cha HGLRC ELRS 2.4 RX-T, ikijumuisha vigezo vya bidhaa, michoro ya muunganisho, hatua za kumfunga, na tahadhari za matumizi.