Miongozo+

Sicce SIC209

Sicce Shark Mini Aquarium Surface Skimmer 350 Instruction Manual

Model: SIC209 | Brand: Sicce

1. Utangulizi

The Sicce Shark Mini Aquarium Surface Skimmer 350 is designed to efficiently remove floating debris, dust, and oil film from the surface of your aquarium water. This helps improve gas exchange and maintains a healthy aquatic environment for both freshwater and saltwater setups. Its compact design and magnetic connection system ensure easy installation and discreet integration into your aquarium.

Sicce Shark Mini Skim Surface Skimmer product overview

Picha 1.1: Juuview of the Sicce Shark Mini Skim Surface Skimmer. This image highlights the product's main features and its application in maintaining clean aquarium surfaces.

2. Taarifa za Usalama

  • Tenganisha usambazaji wa umeme kila wakati kabla ya kufanya matengenezo au usakinishaji wowote.
  • Ensure your hands are dry before plugging in or unplugging the device.
  • This device is intended for indoor use only and for aquariums.
  • Usifanye kazi ikiwa kamba ya umeme au plagi imeharibika.
  • Weka mbali na watoto.
  • The protection grid must always be in place to prevent small fish or invertebrates from entering the skimmer.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kwenye kifurushi:

  • Sicce Shark Mini Skim Surface Skimmer unit
  • Pumpu iliyounganishwa
  • Deflector ya mtiririko
  • Gridi ya Ulinzi
  • External Magnet
  • 30 ppi Mechanical Filter Foam

4. Kuweka na Kuweka

  1. Kuandaa Aquarium: Ensure the aquarium glass is clean where the skimmer will be placed.
  2. Attach the Skimmer: The Shark Mini Skimmer uses a magnetic connection system. Place the skimmer unit inside the aquarium against the glass. Align the external magnet on the outside of the aquarium glass directly opposite the internal magnet of the skimmer. The skimmer is rated for up to 6 mm (0.25") glass thickness.
    3. Magnetic Connection System for Sicce Shark Mini Skimmer

    Image 4.1: Illustration of the Magnetic Connection System (MCS). This image demonstrates how the skimmer attaches to the aquarium glass using magnets, ensuring a secure hold.

  3. Insert Protection Grid: Place the protection grid into the top inlet of the skimmer. This prevents small aquatic life from being drawn into the unit.
    4. Inserting the protection grid into the skimmer

    Image 4.2: Step-by-step guide for inserting the protection grid. The grid is crucial for preventing small fish and invertebrates from entering the skimmer mechanism.

  4. Position the Skimmer: Adjust the skimmer's position so that the water level is within the operating range of the floating inlet. The skimmer float has a 30 mm (1.2") excursion to adapt to varying water levels.
  5. Unganisha Nguvu: Once securely installed and submerged, connect the power cord to a suitable electrical outlet.

5. Maagizo ya Uendeshaji

The Sicce Shark Mini Skimmer is designed for continuous operation to maintain a clean water surface.

  • Surface Skimming: The unique rotating system at the top of the skimmer draws water from the surface, effectively removing oil film and debris.
  • Flow Regulation: The skimmer features a multidirectional flow deflector and a rotating system for optimal surface skimming and flow regulation. You can adjust the rotation to fine-tune the skimming action.
    • Sicce Shark Mini Skimmer rotating system and float excursion

    Image 5.1: Depiction of the unique rotating system and skimmer float. This illustrates how the skimmer adapts to water levels and optimizes surface debris removal.

6. Matengenezo

Regular cleaning of the skimmer is essential for optimal performance and longevity. It is recommended to clean the filter foam every few days, depending on the amount of surface debris in your aquarium.

  1. Ondoa Nguvu: Always unplug the skimmer from the power outlet before any maintenance.
  2. Remove Filter Foam: The part of the Sicce Shark Mini that holds the filter foam is easily removable. Gently slide the top section of the skimmer upwards to access the internal filter foam.
    3. Sicce Shark Mini Skimmer showing release clips for maintenance

    Image 6.1: Close-up of the skimmer's release clips. These clips allow for easy disassembly to access the internal filter components for cleaning.

  3. Clean Filter Foam: Remove the 30 ppi mechanical filter foam. Rinse it thoroughly under running water (preferably aquarium water or dechlorinated tap water) until all debris is removed. Do not use soap or detergents.
    4. Sicce Shark Mini Skimmer with mechanical filtration foam

    Picha ya 6.2: View of the mechanical filtration foam. This image shows the blue foam responsible for trapping physical debris from the water surface.

  4. Clean Impeller and Pump Housing: Periodically, the impeller and pump housing should also be cleaned to prevent mineral buildup and ensure smooth operation. Carefully remove the pump from the skimmer body and clean the impeller and its chamber with a small brush.
  5. Unganisha tena: Reinsert the clean filter foam, reattach the pump (if removed), and secure the top section of the skimmer. Ensure the protection grid is properly seated.
  6. Unganisha tena Nguvu: Once fully reassembled, reconnect the skimmer to the power supply.

7. Utatuzi wa shida

TatizoSababu inayowezekanaSuluhisho
Skimmer not operating / No flow
  • Hakuna usambazaji wa umeme
  • Impeller jammed or dirty
  • Kufuli hewa
  • Angalia muunganisho wa nguvu na plagi.
  • Disconnect power, remove pump, clean impeller and housing.
  • Gently shake the unit underwater to release trapped air.
Reduced flow / Ineffective skimming
  • Clogged filter foam
  • Dirty impeller
  • Water level too low or too high
  • Clean or replace filter foam (see Maintenance).
  • Clean impeller and pump housing.
  • Adjust skimmer position or water level to ensure the float operates correctly.
Skimmer detaches from glass
  • Glass too thick for model 350
  • Magnets not properly aligned
  • Mtetemo mwingi
  • Ensure glass thickness is within 6 mm (0.25"). Consider Shark Mini Skim 350 Plus for thicker glass.
  • Realign internal and external magnets carefully.
  • Check for obstructions or improper assembly causing vibration.
Skimmer is noisy
  • Impeller dirty or damaged
  • Hewa iliyonaswa kwenye pampu
  • Disconnect power, clean impeller. Inspect for damage and replace if necessary.
  • Gently shake the unit underwater to release trapped air.

8. Vipimo

Technical specifications for the Sicce Shark Mini Skimmer 350:

Sicce Shark Mini Skim 350 and 350 Plus specifications table

Image 8.1: Detailed specifications table for the Shark Mini Skim 350 and 350 Plus models. This table provides information on wattage, flow rate, compatible glass thickness, and recommended aquarium volumes.

KipengeleValue (Shark Mini Skim 350)
Power Consumption (110-120 V, 60 Hz)6 W
Kiwango cha Juu cha Mtiririko90 GPH (350 l/h)
For Glass ThicknessUp to 6 mm (0.25")
Kwa saizi ya AquariumUp to 40 US Gallons (150 L)
Urefu wa Cablemita 2.2 (futi 7.55)
Uzito wa KipengeePauni 1.1
Nambari ya Mfano wa KipengeeSIC209

Note: Aquarium volumes are rated for lightly to moderately stocked freshwater aquariums.

9. Udhamini

The Sicce Shark Mini Aquarium Surface Skimmer 350 comes with a Udhamini wa mtengenezaji wa mwaka 5. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Sicce webtovuti au wasiliana na usaidizi kwa wateja.

10. Msaada kwa Wateja

For further assistance, technical support, or warranty inquiries, please visit the official Sicce website or contact their customer service department. You can often find contact information and FAQs on the manufacturer's webtovuti:

Visit Sicce Official Webtovuti

Nyaraka Zinazohusiana - SIC209

Kablaview Mwongozo wa Maelekezo ya Kutengeneza Skimmer ya Shark ya Ndani ya SICCE
Mwongozo huu unatoa maelekezo kwa ajili ya visu vya ndani vya SICCE Shark Skimmer, ikiwa ni pamoja na vipimo vya kiufundi, miongozo ya usalama, na taarifa za vipuri. Unashughulikia mifano ya Shark SKIMMER 150 na Shark SKIMMER 300.
Kablaview Hita ya SICCE JOLLY Aquarium - Maelekezo na Taarifa za Usalama
Mwongozo wa kina wa hita ya maji ya chini ya maji ya SICCE JOLLY, inayofunika maagizo ya usalama, taratibu za uendeshaji, matengenezo, na maelezo ya udhamini. Inafaa kwa maji safi na maji ya chumvi, matangi ya turtle, na paludariums.
Kablaview Shark ADV Kichujio cha Ndani cha Aquarium - Mwongozo wa Mtumiaji na Maagizo ya Usalama
Mwongozo wa kina wa kichungi cha ndani cha aquarium cha Shark ADV, usakinishaji wa kifuniko, uendeshaji, matengenezo, tahadhari za usalama, na maelezo ya udhamini. Inajumuisha maagizo ya lugha nyingi.
Kablaview SICCE SHARK PRO Internal Filter Instruction Manual
Instruction manual for the SICCE SHARK PRO internal aquarium filter, covering safety, technical specifications, assembly, maintenance, and warranty information.
Kablaview Kichujio cha Ndani cha SICCE SHARK PRO NANO: Mwongozo wa Maelekezo na Mwongozo
Mwongozo kamili wa maelekezo kwa ajili ya kichujio cha ndani cha aquarium cha SICCE SHARK PRO NANO. Jifunze kuhusu usakinishaji, matengenezo, usalama, vipimo vya kiufundi, na udhamini.
Kablaview SICCE Shark PRO Internal Filter Instruction Manual
This manual provides instructions and technical specifications for the SICCE Shark PRO internal filter, a high-performance aquarium filter designed for water applications. It includes safety guidelines, component details, and spare parts information.