RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Bidhaa Imeishaview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Kielelezo cha 1.1: Zaidiview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Taarifa za Usalama

• ONYO: Hatari ya mshtuko wa umeme. Kata umeme kwenye fyuzi au kivunja mzunguko kabla ya usakinishaji au ukarabati.
• Ufungaji lazima ufanywe na fundi umeme aliyehitimu kwa mujibu wa kanuni zote za umeme za kitaifa na za mitaa.
• Hakikisha ujazo wa usambazajitage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• Usisakinishe karibu na vifaa vinavyoweza kuwaka.
• Kifaa hiki kimekusudiwa kwa matumizi ya ndani pekee.

3. Kuweka na Kuweka

3.1. Kabla ya Ufungaji

• Fungua kifaa na uangalie uharibifu wowote.
• Ensure all necessary components are present (LED Fixture).
• Zima umeme kwenye kivunja mzunguko kabla ya kuanza usakinishaji.

3.2. Kuweka Mpangilio

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Kielelezo cha 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Wiring ya Umeme

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Kielelezo cha 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Maagizo ya Uendeshaji

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Kielelezo cha 4.1: Karibu-up view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Chagua mojawapo ya mipangilio ifuatayo: 40W, 50W, au 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Chagua mojawapo ya mipangilio ifuatayo: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Dimmable Functionality

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Matengenezo

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Kusafisha: Ondoa nguvu kabla ya kusafisha. Tumia laini, kavu, au d kidogoamp kitambaa cha kuifuta sehemu ya nje ya kifaa. Usitumie visafishaji au viyeyusho vya kukwaruza.
• LEDs: Chanzo cha mwanga cha LED kilichounganishwa kimeundwa kwa ajili ya maisha marefu na hakihitaji kubadilishwa.

6. Utatuzi wa shida

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Vipimo

8. Taarifa za Udhamini

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.

9. Msaada kwa Wateja

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webtovuti: www.rablighting.com
• Rejea website for current contact information, including phone numbers and email support.