Mwongozo wa Mtumiaji wa Mchoraji wa Laser wa SCULPFUN S30

Utangulizi

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

Taarifa za Usalama

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

Ulinzi wa Macho: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
Uingizaji hewa: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
Hatari ya Moto: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
Utangamano wa Nyenzo: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
Ulinzi wa uso wa kazi: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
Watoto na Wanyama wa Kipenzi: Weka watoto na wanyama wa kipenzi mbali na eneo la uendeshaji.
Usalama wa Umeme: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp masharti.

Vipengele vya Bidhaa

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

Automatic Air Assist: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
Usanifu Salama na Imara: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
Utangamano mpana: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File formats include NC, BMP, JPG, PNG, DXF, and other image formats.
Pato la Laser: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Comparison of Manual vs. Automatic Air Assist

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

Mwongozo wa Kuweka

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

Kufungua: Ondoa kwa uangalifu vipengele vyote kutoka kwenye kifungashio. Hakikisha vipengele vyote vipo kwenye orodha ya vifungashio.
Mkutano: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
Usakinishaji wa Moduli ya Leza: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
Muunganisho wa Pampu ya Hewa: Connect the air pump to the designated port on the laser module and the main control board.
Uunganisho wa Nguvu na USB: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
Ufungaji wa Programu: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
Urekebishaji wa Awali: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

Kielelezo 7: Zaidiview of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

Maagizo ya Uendeshaji

This section outlines the basic steps for operating your laser engraver:

Tayarisha Nyenzo: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
Usanidi wa Programu: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
Mipangilio ya Kigezo: Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
Focus the Laser: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
Anza Operesheni: Initiate the engraving or cutting process from the software. Monitor the process closely.
Kukamilika: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

Video 1: Demonstration of the SCULPFUN S30 Laser Engraver in operation, showcasing its cutting and engraving capabilities on various materials. This video highlights the precision and speed of the machine.

Video 2: Maelezo ya kinaview of the SCULPFUN S30/S30 Pro/S30 Pro Max laser engraver, illustrating key features and performance aspects across the series.

Matengenezo

Regular maintenance ensures the longevity and performance of your engraver:

Safisha Lenzi: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
Safisha Eneo la Kazi: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
Reli za Kulainisha: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
Angalia Viunganisho: Regularly inspect all cable connections for looseness or damage.

Kutatua matatizo

Maswala ya kawaida na suluhisho zao:

Tatizo	Sababu inayowezekana	Suluhisho
Laser haina kurusha	Power cable loose, emergency stop engaged, software error, laser module fault.	Check power connections, release emergency stop button, restart software/computer, contact support if issue persists.
Ubora duni wa kuchonga/kukata	Incorrect focus, wrong power/speed settings, dirty lens, material issues.	Re-focus laser, adjust power/speed settings, clean laser lens, ensure material is suitable and flat.
Mashine haisogei	Loose belt, motor cable disconnected, software communication error.	Check and tighten belts, verify motor cable connections, restart software/computer, check USB connection.
Air assist not working	Air pump not connected, M8 command not enabled in software, air hose kinked.	Ensure air pump is connected and powered, enable M8 command in LightBurn, check air hose for obstructions.

Vipimo

Mfano: xxl-S30 5W
Nguvu ya Pato la Laser: 5W
Eneo la Kuchonga: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
Mkazo wa Laser: mm 0.06 x 0.06 mm
Linear Guide Accuracy: 0.005 mm
Ubao wa mama: Latest 32-bit with Air-Assist automatic control
Muunganisho: USB, Bluetooth, SD Card (offline printing)
Programu Inayotumika: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
Mifumo ya Uendeshaji Inayotumika: Windows, MAC
Imeungwa mkono File Miundo: NC, BMP, JPG, PNG, DXF, nk.
Vipimo vya Bidhaa: Inchi 18.11 x 18.11 x 6.69
Uzito wa Kipengee: Pauni 14.17
Mtengenezaji: SCULPFUN
Nchi ya Asili: China
Tarehe ya Kwanza Inapatikana: Julai 9, 2024

Udhamini na Msaada

For warranty information and technical support, please refer to the official SCULPFUN webtovuti au wasiliana na mchuuzi wako. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai ya udhamini.

Duka Rasmi la SCULPFUN: Visit the SCULPFUN Store on Amazon

	Maelekezo na Mwongozo wa Mkutano wa Mchongaji wa Laser SCULPFUN S30 Maagizo ya kina ya kusanyiko kwa Mchongaji wa Laser wa SCULPFUN S30. Jifunze jinsi ya kuunda mchonga leza yako hatua kwa hatua, ikijumuisha kukandamiza ukanda na vidokezo vya kulenga. Inajumuisha programu na maelezo ya usaidizi.
	Mwongozo wa Ufungaji wa Moduli ya Laser ya SCULPFUN IR-2 2W 1064nm Maagizo ya kina ya usakinishaji wa moduli ya leza ya SCULPFUN IR-2 2W 1064nm, kufunika vifungashio, kuunganisha, na kupachika kwa miundo mbalimbali ya kuchonga leza ya SCULPFUN ikijumuisha SF-A9, S10, S6, S9, S30, na S30 Ultra.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa kina wa mtumiaji wa mashine za kuchonga za leza za SCULPFUN S6 na S9 mfululizo, kufunika usakinishaji wa programu (LaserGRBL na LightBurn), unganisho, utayarishaji, mipangilio ya kuchonga, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9, inayofunika usakinishaji wa programu (LaserGRBL, LightBurn), muunganisho, utayarishaji wa kuchonga, uendeshaji, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	SCULPFUN H4 Honeycomb Panel Assembly Guide Detailed assembly instructions and parts list for the SCULPFUN H4 Honeycomb Panel, designed for laser cutting and engraving.
	Mwongozo wa Mtumiaji wa SCULPFUN S40 MAX Laser Mchoraver: Mwongozo wa Ufungaji, Uendeshaji, na Matengenezo. Mwongozo wa kina wa mtumiaji wa mashine ya kuchonga na kukata laser ya SCULPFUN S40 MAX. Inajumuisha miongozo ya usakinishaji, usanidi wa programu ya LaserGRBL na LightBurn, uendeshaji wa skrini ya kugusa, muunganisho wa programu ya simu, vidokezo vya urekebishaji na maelezo ya udhamini.

SCULPFUN xxl-S30 5W