Eliminator Lighting Bubbletron EXL Bubble Machine User Manual

Utangulizi

This manual provides essential information for the safe and efficient operation of your Eliminator Lighting Bubbletron EXL Bubble Machine. Please read these instructions thoroughly before initial use to ensure proper setup, operation, and maintenance.

Taarifa za Usalama

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury:

• Hakikisha kitengo kimewekwa kwenye uso thabiti, usawa.
• Usifanye kitengo ikiwa kamba ya nguvu imeharibiwa.
• Keep the unit away from water or other liquids.
• Usizuie fursa za uingizaji hewa.
• Use only approved bubble fluid.
• Chomoa kifaa kabla ya kusafisha au kuhudumia.
• This device is for indoor use or covered outdoor use in dry conditions only.
• Weka mbali na watoto.

Yaliyomo kwenye Kifurushi

• Eliminator Bubbletron EXL Bubble Machine
• 9-foot/3M Wired Remote Control (Model: LC-3)
• Kamba ya Nguvu
• Mwongozo wa Mtumiaji (hati hii)

Sanidi

1. Kufungua: Carefully remove the bubble machine from its packaging. Inspect for any damage during transit.
2. Uwekaji: Place the unit on a flat, stable surface. Ensure adequate ventilation around the machine.
3. Tangi ya Maji: Locate the EZ-Access front fluid tank. Open the tank cover.
4. Jaza na Majimaji: Pour appropriate bubble fluid into the tank. Do not overfill; observe the MAX fill line.
5. Muunganisho wa Nishati: Connect the power cord to the unit's power input and then to a suitable electrical outlet (120V or 230V, depending on model).
6. Muunganisho wa Kidhibiti cha Mbali: Plug the wired remote control (LC-3) into the designated remote control input on the rear of the unit.

Maelezo ya Picha: An annotated diagram showing the top and rear views of the Eliminator Bubbletron EXL. Key components are labeled, including the Carrying Handle, EZ-Access Front Fluid Tank, Manual Bubble Switch, Input for Remote Control, Fuse, Power Cord, and Large Dual Fans.

Maagizo ya Uendeshaji

1. Washa: Flip the ON/OFF switch located on the rear of the unit to the "ON" position.
2. Washa Viputo:
   • Wired Remote Control (LC-3): Use the switch on the LC-3 remote control to turn the bubble production ON or OFF.
   • Badili kwa Mwongozo: If not using the remote, the manual bubble switch on the rear of the unit can be used to activate bubble production.
3. Bubble Production: The internal bubble wands will begin to rotate, and the dual high-velocity fans will disperse bubbles into the air.
4. Zima umeme: When finished, turn the bubble production OFF using the remote or manual switch, then flip the main ON/OFF switch on the rear of the unit to the "OFF" position. Unplug the power cord from the electrical outlet.

Maelezo ya Picha: The Eliminator Bubbletron EXL bubble machine in operation, emitting a large quantity of bubbles against a dark background with blue lighting, demonstrating its output capacity.

Matengenezo

Regular maintenance ensures optimal performance and extends the lifespan of your bubble machine.

• Fluid Tank Cleaning: After each use, empty any remaining bubble fluid from the tank. Rinse the tank with distilled water to prevent residue buildup.
• Usafishaji wa nje: Futa sehemu ya nje ya kitengo na kitambaa laini na kavu. Usitumie visafishaji vya abrasive au vimumunyisho.
• Matundu ya Mashabiki: Periodically check the fan vents for dust or debris. Use a soft brush or compressed air to clean them.
• Hifadhi: Store the unit in a cool, dry place when not in use. Ensure the fluid tank is empty and clean before storage.

Kutatua matatizo

Vipimo

Udhamini na Msaada

For warranty information and technical support, please contact Eliminator Lighting directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Maelezo ya Mawasiliano: Please refer to the official Eliminator Lighting webtovuti au kifungashio cha bidhaa kwa maelezo ya mawasiliano ya hivi karibuni kwa ajili ya usaidizi kwa wateja.