Miongozo+

Graco Ultra 695 XT 19F545

Graco Ultra 695 XT Standard Series Electric Airless Sprayer User Manual

Mfano: 19F545

1. Utangulizi

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Graco Ultra 695 XT Standard Series Electric Airless Sprayer. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The Graco Ultra 695 XT is designed for professional use, offering high performance for various painting and coating applications. Understanding its features and functions is crucial for optimal results.

2. Taarifa za Usalama

Always observe safety precautions to reduce the risk of fire, electric shock, and personal injury. This equipment operates under high pressure, which can cause serious injury.

  • Soma maagizo yote: Familiarize yourself with the sprayer's operation and safety guidelines.
  • Vaa vifaa vinavyofaa vya kinga ya kibinafsi (PPE): This includes safety glasses, gloves, and a respirator.
  • Hakikisha uingizaji hewa sahihi: Operate in a well-ventilated area to avoid inhaling fumes.
  • Ground the equipment: Always connect the sprayer to a properly grounded outlet.
  • Never point the spray gun at yourself or others: High-pressure fluid can penetrate skin and cause severe injury.
  • Relieve pressure: Always relieve system pressure before cleaning, checking, or servicing any part of the sprayer.
  • Use compatible materials: Ensure all paints and solvents are compatible with the sprayer components.

3. Bidhaa Imeishaview

The Graco Ultra 695 XT is an electric airless sprayer designed for heavy-duty applications. It features a robust motor and pump system mounted on a durable Hi-Boy cart for easy portability.

Graco Ultra 695 XT Airless Sprayer with hose and spray gun

Kielelezo cha 3.1: Complete Graco Ultra 695 XT Airless Sprayer setup, including the main unit on its Hi-Boy cart, high-pressure hose, and spray gun. This image shows the full system ready for operation.

Graco Ultra 695 XT Airless Sprayer main unit on cart

Kielelezo cha 3.2: Upande view of the Graco Ultra 695 XT main sprayer unit mounted on its Hi-Boy cart. This view highlights the robust frame and large wheels designed for mobility on job sites.

Mbele view of Graco Ultra 695 XT Airless Sprayer main unit

Kielelezo cha 3.3: Mbele view of the Graco Ultra 695 XT sprayer's pump and motor assembly. This image provides a clear look at the control panel and fluid section components.

Vipengele Muhimu:

  • Mkutano wa injini na pampu: Provides the power for high-pressure fluid delivery.
  • Hi-Boy Cart: Wheeled frame for easy transport and stability.
  • Shinikizo la Shinikizo la Juu: Connects the sprayer to the spray gun.
  • Bunduki ya dawa: Controls the application of material.
  • Fluid Section: Draws material from the container and pressurizes it.
  • Udhibiti wa Shinikizo: Adjusts the spraying pressure.

4. Kuweka

Mpangilio sahihi ni muhimu kwa uendeshaji salama na ufanisi.

  1. Fungua na Kagua: Remove all components from the packaging. Inspect for any shipping damage.
  2. Kusanya mkokoteni: If not pre-assembled, attach the wheels and handles to the Hi-Boy cart according to the included assembly guide.
  3. Unganisha Hose ya Shinikizo la Juu: Securely attach one end of the high-pressure hose to the fluid outlet on the sprayer and the other end to the spray gun. Ensure all connections are tight.
  4. Install the Spray Tip: Insert the appropriate spray tip into the spray gun guard and secure it.
  5. Unganisha Nguvu: Plug the sprayer into a grounded electrical outlet. Ensure the power source matches the sprayer's voltage mahitaji.
  6. Tayarisha Nyenzo: Stir and strain your paint or coating material as recommended by the manufacturer. Place the suction tube into the material container.
  7. Prime the Sprayer: Follow the priming procedure outlined in the operating instructions to remove air from the system and fill it with material.

5. Maagizo ya Uendeshaji

Follow these steps for safe and effective spraying.

5.1. Priming the Sprayer

  1. Ensure the prime/spray valve is in the "Prime" position.
  2. Place the drain tube into a waste bucket.
  3. Turn on the sprayer and slowly increase the pressure until material flows smoothly from the drain tube, free of air bubbles.
  4. Zima kinyunyizio.

5.2. Kunyunyizia dawa

  1. After priming, turn the prime/spray valve to the "Spray" position.
  2. Turn on the sprayer and set the desired pressure using the pressure control knob.
  3. Test the spray pattern on a piece of cardboard or scrap material. Adjust pressure as needed for an even pattern.
  4. Maintain a consistent distance and speed while spraying for uniform coverage.
  5. Always release the spray gun trigger when moving or adjusting your position.

5.3. Kuzima

  1. Zima kinyunyizio.
  2. Turn the prime/spray valve to the "Prime" position.
  3. Engage the spray gun trigger lock.
  4. Relieve pressure by holding the spray gun into a waste bucket and disengaging the trigger lock, then pulling the trigger until all pressure is released.
  5. Tenganisha kamba ya umeme.

6. Matengenezo

Regular maintenance ensures the longevity and performance of your sprayer.

6.1. Kusafisha Baada ya Kila Matumizi

  1. After relieving pressure, remove the suction tube from the material and place it into a bucket of appropriate cleaning solution (water for latex, mineral spirits for oil-based paints).
  2. Place the drain tube into a waste bucket.
  3. Turn the prime/spray valve to "Prime" and turn on the sprayer. Allow the cleaning solution to circulate until it runs clear from the drain tube.
  4. Turn the prime/spray valve to "Spray" and spray the cleaning solution through the gun into a waste bucket until it runs clear.
  5. Turn off the sprayer, relieve pressure, and disconnect the power.
  6. Remove and clean the spray tip and filter separately.

6.2. Hifadhi

For long-term storage, flush the system with pump protector fluid to prevent corrosion and freezing.

6.3. Hundi za Mara kwa Mara

  • Inspect hoses for wear, cuts, or leaks.
  • Check spray gun for proper function and cleanliness.
  • Hakikisha viunganisho vyote vimekazwa.

7. Utatuzi wa shida

Sehemu hii inashughulikia masuala ya kawaida ambayo unaweza kukutana nayo.

TatizoSababu inayowezekanaSuluhisho
Hakuna dawa ya kunyunyizia au shinikizo la chiniClogged tip, clogged filter, air in system, worn pump packings, material too thick.Clean tip/filter, prime sprayer, replace packings, thin material (if allowed by manufacturer).
Pulsating dawaAir in system, clogged filter, worn inlet valve.Re-prime sprayer, clean filter, inspect/replace inlet valve.
Motor inaendesha lakini hakuna shinikizoSuction tube not in material, air leak in suction system, prime valve open.Ensure suction tube is submerged, check connections, close prime valve.

For issues not listed here, refer to the comprehensive troubleshooting guide in the full Graco service manual or contact Graco customer support.

8. Vipimo

KipengeleMaelezo
ChapaGraco
MfanoUltra 695 XT (19F545)
NyenzoChuma
Uzito wa KipengeePauni 122
UPC769946362718
MfululizoMfululizo wa Kawaida
AinaElectric Airless Sprayer, Hi-Boy

9. Udhamini na Msaada

Kwa maelezo ya kina kuhusu udhamini, tafadhali rejelea kadi ya udhamini iliyojumuishwa na bidhaa yako au tembelea Graco rasmi website. For technical assistance, parts, or service, contact Graco customer support directly.

Kumbuka: Matengenezo yasiyoidhinishwa au marekebisho yanaweza kubatilisha udhamini wako.

Nyaraka Zinazohusiana - Ultra 695 XT 19F545

Kablaview Kinyunyizio cha Umeme cha Graco 695 kisicho na hewa: Mwongozo wa Uendeshaji, Sehemu, na Urekebishaji
Mwongozo wa kina wa Kinyunyizio cha Umeme cha Graco 695, uendeshaji wa kufunika, utambulisho wa sehemu, usanidi, uanzishaji, matengenezo, utatuzi na taratibu za ukarabati. Inajumuisha maonyo ya usalama na vipimo vya kiufundi.
Kablaview Kinyunyizio cha Rangi kisicho na hewa cha Graco Ultra Max 795: Maelekezo na Orodha ya Sehemu
Maagizo ya kina, orodha ya sehemu, mwongozo wa utatuzi, na taratibu za ukarabati wa Kinyunyizio cha Rangi kisicho na hewa cha Graco Ultra Max 795 (Miundo 232140, 232141). Inashughulikia usanidi, uendeshaji, matengenezo, na uingizwaji wa sehemu.
Kablaview Tathmini ya Hatari ya Uendeshaji wa Graco GX19 na Mwongozo wa Mtumiaji
Tathmini ya kina ya hatari na mwongozo wa uendeshaji wa Kinyunyizio kisicho na hewa cha Graco GX19, usanidi, uanzishaji, mbinu za kunyunyuzia, kusafisha na kuhifadhi. Inajumuisha maonyo ya usalama na maelezo ya uoanifu wa nyenzo.
Kablaview Kinyunyizio cha Umeme cha Graco 390 kisicho na hewa: Mwongozo wa Uendeshaji na Sehemu
Mwongozo wa kina wa Graco 390 Electric Airless Sprayers, uendeshaji wa kufunika, usanidi, maagizo ya usalama, utatuzi wa matatizo, na vitambulisho vya sehemu kwa matumizi ya kitaaluma.
Kablaview Mwongozo wa Haraka wa Kinyunyizio cha Graco Magnum GX19: Usanidi, Uendeshaji, na Matengenezo
Mwongozo mfupi wa kinyunyizio cha Graco Magnum GX19, usanidi wa kufunika, uanzishaji, unyunyiziaji, usafishaji na uhifadhi. Inajumuisha maonyo ya usalama na vidokezo vya uendeshaji kwa uchoraji wa dawa isiyo na hewa.
Kablaview Mwongozo wa Uendeshaji na Sehemu za Vinyunyizi vya Umeme vya Graco (3A6491L)
Mwongozo wa kina wa uendeshaji na sehemu za Vinyunyizio visivyo na hewa vya Graco Electric (Miundo 490, 495, 595, 650, 395EU). Inashughulikia usanidi, usalama, uendeshaji, matengenezo, utatuzi wa matatizo, na kitambulisho cha sehemu kwa matumizi ya kitaaluma.