OMTech 90W CO2 Laser Engraver with Autofocus, Water Chiller, and LightBurn Software (Model: 90W AF)

1. Utangulizi

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your OMTech 90W CO2 Laser Engraver. This machine is designed for precision engraving and cutting of various non-metallic materials, featuring autofocus, a 20"x28" work area, and integration with LightBurn software. Please read this manual thoroughly before operating the equipment.

Image 1.1: The OMTech 90W CO2 Laser Engraver with its accompanying water chiller and LightBurn software logo, showcasing mfumo kamili.

2. Taarifa za Usalama

WARNING: This product contains a Class 2 laser. Improper use can result in serious injury.

Ulinzi wa Macho: Always wear appropriate laser safety glasses when operating or observing the laser. The machine features a flame-resistant window for safe observation, but direct exposure to the laser beam must be avoided.
Uingizaji hewa: Ensure adequate ventilation is in place to remove fumes and particulate matter generated during engraving and cutting. Connect the exhaust system properly.
Usalama wa Moto: Keep a fire extinguisher nearby. Never leave the machine unattended during operation. Certain materials are highly flammable.
Usalama wa Umeme: Ensure the machine is properly grounded. Do not operate with damaged power cords or in wet conditions.
Utangamano wa Nyenzo: Only engrave or cut materials specified as safe for CO2 lasers. Avoid materials that produce toxic fumes or are highly reflective.

Safe observation through flame-resistant window

Image 2.1: The flame-resistant window allows for safe observation of the engraving process, protecting users from direct laser exposure.

3. Yaliyomo kwenye Kifurushi

Thibitisha kwamba vipengele vyote vipo wakati wa kufungua kisanduku:

OMTech 90W CO2 Laser Engraver
Water Chiller (CW-5200 Industrial Chiller)
LightBurn Software License
Honeycomb Workbed
Aluminum Blade Workbed
Air Assist Compressor
Exhaust Fan and Ducting
Cable ya Nguvu
Kebo ya USB
Water Hoses and Clamps
Tool Kit and Accessories

4. Kuweka

4.1 Kufungua na Kuweka

Carefully remove the laser engraver and all accessories from the packaging.
Place the machine on a stable, level surface capable of supporting its weight (approximately 258 lbs).
Ensure adequate clearance around the machine for ventilation and access.

4.2 Water Chiller Connection

The included CW-5200 water chiller is crucial for maintaining the laser tube's temperature and extending its lifespan.

Kipozeo cha Maji cha Viwandani cha OMTech CW-5200

Image 4.1: The CW-5200 industrial water chiller, essential for cooling the laser tube during operation.

Fill the water chiller reservoir with distilled water (approximately 6-7 liters). Do not use tap water.
Connect the chiller's inlet and outlet ports to the corresponding ports on the laser engraver using the provided hoses and clamps. Ensure a secure, leak-free connection.
Power on the chiller and allow it to circulate water and stabilize temperature before operating the laser.

4.3 Air Assist and Exhaust System

Connect the air assist compressor to the designated port on the laser engraver.
Attach the exhaust fan and ducting to the machine's exhaust port. Route the ducting to an outdoor vent or a suitable filtration system to safely remove fumes.

4.4 Electrical and Data Connections

Connect the main power cable to a grounded electrical outlet.
Connect the laser engraver to your computer via USB or Ethernet cable.
Install the LightBurn software on your computer using the provided license key.

5. Maagizo ya Uendeshaji

5.1 Kuwasha

Ensure the water chiller is running and circulating water.
Turn on the main power switch on the laser engraver.
The digital control panel will initialize.

Digital control panel compatible with LightBurn, RDWorks, CorelDRAW, and AutoCAD

Image 5.1: The digital control panel offers intuitive operation and compatibility with various design software, including LightBurn.

5.2 Material Loading and Autofocus

Place your material onto the desired workbed (honeycomb for cutting, blade for engraving). The machine includes both a honeycomb and an aluminum blade bed.
Funga kifuniko cha mashine.
Utilize the autofocus feature by pressing the designated button on the control panel or through LightBurn. The laser head will automatically adjust to the correct focal distance for your material.

Laser head performing rapid autofocus on a wooden surface

Image 5.2: The rapid autofocus system eliminates manual adjustments, ensuring precise focal distance with a single button press.

5.3 Using LightBurn Software

Open LightBurn and import or create your design.
Set appropriate laser parameters (speed, power, number of passes) based on your material and desired outcome. Refer to material test guides for optimal settings.
Position your design on the virtual work area to match your material placement.
Send the job to the laser engraver.

Computer screen displaying LightBurn software interface

Image 5.3: The LightBurn software interface, providing comprehensive control over design, settings, and job execution.

5.4 Mchakato wa Kuchonga na Kukata

Initiate the job from the control panel or LightBurn.
Monitor the process through the flame-resistant window.
The machine operates at speeds up to 600 mm/s, significantly boosting productivity.

Laser engraver operating at 600 mm/s on a wooden surface

Image 5.4: The laser head moving rapidly across a workpiece, demonstrating the 600 mm/s engraving speed.

5.5 Using Four-Way Pass-Through Doors

For larger or longer materials that exceed the 20"x28" work area, utilize the four-way pass-through doors.

Diagram showing the four-way pass-through feature of the laser engraver

Image 5.5: The four-way pass-through design allows for processing materials longer than the workbed, enhancing versatility.

6. Matengenezo

Matengenezo ya mara kwa mara huhakikisha utendaji bora na huongeza muda wa matumizi wa mashine yako ya kuchora kwa leza.

Kusafisha Lenzi na Vioo: Periodically clean the optical lenses and mirrors with specialized lens cleaning solution and wipes to maintain laser beam quality.
Matengenezo ya Kipozeo cha Maji: Change the distilled water in the chiller every 1-3 months, depending on usage. Monitor water temperature to ensure it remains within the recommended range.
Kusafisha Vitanda vya Kazi: Remove debris and residue from the honeycomb and blade workbeds regularly to prevent buildup and ensure proper material support.
Kifaa cha Kusaidia Hewa: Check and clean the air assist nozzle to ensure a clear path for compressed air, which helps prevent flare-ups and keeps the lens clean.
Laser Tube Care: The Yongli H2 tube has a lifespan of up to 8,000 hours. Consistent use at lower power settings can extend its life. Handle with care during any inspection or replacement.

Diagram of a high-performance Yongli H2 laser tube

Image 6.1: The high-performance Yongli H2 laser tube, designed for efficiency and longevity.

7. Utatuzi wa shida

7.1 Masuala ya Kawaida na Suluhu

Tatizo	Sababu inayowezekana	Suluhisho
Laser haina kurusha	Water chiller alarm, lid open, emergency stop engaged, power settings too low	Check chiller status, ensure lid is closed, disengage emergency stop, verify power settings in software.
Ubora duni wa kuchonga/kukata	Incorrect focus, dirty optics, wrong power/speed settings, material issues	Perform autofocus, clean lenses/mirrors, adjust power/speed, ensure material is flat and suitable.
Mashine haiunganishi kwenye kompyuta	Loose USB/Ethernet cable, driver issues, incorrect software settings	Check cable connections, reinstall drivers, verify communication settings in LightBurn.
Kengele ya kuzuia maji	Low water level, high water temperature, pump malfunction	Check water level and refill with distilled water, ensure proper ventilation for chiller, contact support if pump issue persists.

8. Vipimo

Kipengele	Maelezo
Chapa	OMTech
Mfano	90W AF
Nguvu ya Laser	90W CO2 (Yongli H2 Tube)
Eneo la Kazi	20" x 28" (milimita 500 x 700)
Max. Kasi ya Kuchonga	600 mm/s (ips 23.6)
Max. Kina cha Kuchonga	0.4" (10 mm) on non-metallic materials
Kuzingatia kiotomatiki	Ndiyo
Vitanda vya kazi	Kisu cha asali na blade ya alumini
Kupitia	Njia Nne
Utangamano wa Programu	LightBurn (included), RDWorks, CorelDRAW, AutoCAD
Muunganisho	USB, Ethernet, USB Flash Drive (Offline)
Uzito wa Kipengee	Pauni 258 (kilo 117)
Vipimo vya Bidhaa	Inchi 59.1 x 34.3 x 35.4 (sentimita 150 x 87 x 90)
Darasa la Laser	Daraja la 2, nguvu ya kutoa ya 0.827 mW

OMTech 90W CO2 Laser Engraver with key specifications overlaid

Picha 8.1: Juuview of the OMTech 90W CO2 Laser Engraver's key specifications and features.

9. Udhamini na Msaada

OMTech provides comprehensive customer support for its products.

Usaidizi wa Baada ya Uuzaji: Siku 7 kwa wiki, saa 24 kwa siku.
Simu: +1 (949) 438-4949
Barua pepe ya Usaidizi: SUPPORT@OMTECHLASER.COM
Usaidizi wa Kiufundi: TECHSUPPORT@OMTLASER.COM

For the most current warranty information, please refer to the official OMTech webtovuti au wasiliana na huduma kwa wateja moja kwa moja.

	OMTech USB1006c Mwongozo wa Mtumiaji wa Baraza la Mawaziri la Mchongaji Laser Mwongozo wa kina wa mtumiaji wa Mchongaji Laser wa Kabati la OMTech USB1006c. Inashughulikia miongozo muhimu ya usalama, taratibu za kina za usakinishaji, maagizo ya uendeshaji, na taratibu za matengenezo kwa ajili ya utendakazi bora na maisha marefu ya mashine yako ya kuchonga leza ya CO2.
	Mwongozo na Mwongozo wa Mmiliki wa Mchongaji wa Laser wa Eneo-kazi la OMTech 350 50W Mwongozo huu wa kina wa mmiliki hutoa maagizo ya kina kwa ajili ya usakinishaji, uendeshaji, usalama, na matengenezo ya Kichonga Laser ya Eneo-kazi la OMTech Polar 350 50W. Jifunze kuhusu vipengele vyake, vipimo, na mbinu bora za matumizi.
	Mwongozo wa Mtumiaji wa Omtech USB570a Kabati la Mchonga Laser - Mwongozo wa Ufungaji, Uendeshaji na Usalama Mwongozo wa kina wa mtumiaji wa Mchonga Laser wa Kabati la Omtech USB570a, unaoeleza kwa kina usakinishaji, uendeshaji, miongozo ya usalama, na matengenezo kwa ajili ya utendakazi bora na usalama wa mtumiaji.
	OMTech 032B (40W) Mwongozo wa Mtumiaji wa Laser ya Eneo-kazi Mwongozo wa kina wa mtumiaji wa Kichonga Laser ya Eneo-kazi la OMTech 032B (40W), kufunika usakinishaji, usalama, uendeshaji, matengenezo, na utatuzi wa matatizo. Jifunze kutumia kwa usalama na kwa ufanisi mashine yako ya kuchonga laser.
	Mwongozo wa Mtumiaji wa OMTech USB1006a Baraza la Mawaziri Laser Mchongaji Mwongozo kamili wa mtumiaji wa Kichoraji cha Laser cha Kabati cha OMTech USB1006a, kinachoshughulikia usakinishaji, uendeshaji, usalama, na matengenezo. Jifunze kuhusu vipimo vyake, vipengele, na mbinu bora za kuchonga vifaa mbalimbali.
	Mwongozo wa Mtumiaji wa OMTech Solis Duo Dual Laser Mcraver Mwongozo wa kina wa mtumiaji wa OMTech Solis Duo Dual Laser Engraver (20W Fiber & 20W Diode). Inashughulikia tahadhari za usalama, vipimo vya kiufundi, kitambulisho cha sehemu, kuunganisha, usakinishaji wa programu, taratibu za uendeshaji, matengenezo na programu za ziada.

OMTech 90W AF

OMTech 90W CO2 Laser Engraver Instruction Manual