Franke WD-900 Colorline Garbage Disposal Flange Kit Instruction Manual

1. Utangulizi

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Franke WD-900 Colorline Garbage Disposal Flange Kit. Designed to complement Franke Granite sinks, this flange kit offers a seamless and integrated appearance for your kitchen. The Colorline waste kits are crafted with full color throughout and include a special UV additive to prevent fading. They are built to withstand high temperatures, resist scratches and stains, and are food contact safe.

Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

2. Taarifa za Usalama

Zingatia tahadhari zifuatazo za usalama wakati wa ufungaji na matumizi:

Always turn off electrical power to the garbage disposal unit at the circuit breaker before attempting any installation, maintenance, or repair.
Professional installation is recommended to ensure correct setup and prevent potential issues.
Vaa vifaa vya kinga vya kibinafsi vinavyofaa, kama vile miwani ya usalama na glavu, wakati wa ufungaji.
Hakikisha miunganisho yote ni salama na isiyopitisha maji ili kuzuia uvujaji.
Do not use harsh abrasive cleaners on the flange kit, as this may damage the finish.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:

Franke WD-900 Colorline Garbage Disposal Flange (Matte Black)
Stopper/Basket Strainer (Matte Black)
Gasket(s) and mounting hardware (typically included with disposal unit or flange kit)

Franke WD-900 Colorline Garbage Disposal Flange Kit in Matte Black

Image: Franke WD-900 Colorline Garbage Disposal Flange Kit. This image displays the matte black flange and stopper, designed for integration with a garbage disposal unit. The flange features a wide rim and a removable stopper with drainage slots.

4. Kuweka na Kuweka

This flange kit is designed to be installed with a compatible garbage disposal unit. The following steps outline a general installation process. Refer to your garbage disposal unit's manual for specific instructions regarding its connection to the flange.

Maandalizi: Ensure the sink opening is clean and free of debris. Turn off the power to the garbage disposal at the circuit breaker.
Remove Old Flange (if applicable): If replacing an existing flange, disconnect the garbage disposal from the old flange and remove all old components from the sink opening. Clean any old plumber's putty or sealant.
Tumia Putty ya Fundi: Roll a thin rope of plumber's putty and apply it around the underside edge of the new Franke WD-900 flange.
Insert Flange: Insert the flange into the sink drain opening from above, pressing firmly to create a seal with the putty.
Install Mounting Assembly: From underneath the sink, slide the rubber gasket, fiber gasket, and mounting ring onto the flange. Secure these components with the provided screws or bolts, tightening them evenly until the flange is snug and the putty squeezes out from under the rim. Wipe away excess putty.
Connect Garbage Disposal: Attach the garbage disposal unit to the newly installed flange's mounting assembly according to the disposal unit's manufacturer instructions. Ensure all connections are tight and secure.
Jaribio la Uvujaji: Once installation is complete, fill the sink with water and check for any leaks around the flange and disposal connections. Tighten any leaking connections as needed.
Rejesha Nguvu: Turn the electrical power back on at the circuit breaker.

5. Maagizo ya Uendeshaji

The Franke WD-900 Colorline Flange Kit includes a stopper/basket strainer for convenient use:

Kukaza: Place the stopper into the flange opening with the drainage slots facing down to allow water to drain while catching food particles.
Kuzuia Maji: Rotate the stopper to block the drainage slots or press it down firmly into the opening to create a seal, allowing the sink to fill with water.
Garbage Disposal Use: Remove the stopper completely when operating the garbage disposal unit.

6. Matengenezo na Matunzo

To maintain the appearance and functionality of your Franke WD-900 Colorline Flange Kit:

Kusafisha mara kwa mara: Clean the flange and stopper regularly with mild soap and water. Wipe dry with a soft cloth to prevent water spots.
Epuka Kemikali kali: Do not use abrasive cleaners, scouring pads, or harsh chemical detergents, as these can damage the matte black finish and material.
Upinzani wa Madoa: The material is designed to be stain resistant. For stubborn stains, a non-abrasive cleaner specifically designed for kitchen fixtures may be used, followed by thorough rinsing.
Ulinzi wa UV: The integrated UV additive helps prevent color fading over time, ensuring the matte black finish remains consistent.

7. Utatuzi wa shida

If you encounter issues with your Franke WD-900 Colorline Flange Kit, consider the following:

Leaks Around Flange:
- Ensure the plumber's putty was applied correctly and evenly under the flange rim.
- Check that the mounting screws/bolts underneath the sink are tightened evenly and securely.
- Inspect gaskets for proper placement and damage. Replace if necessary.
Stopper Not Sealing:
- Ensure the stopper is free of debris that might prevent a proper seal.
- Verify the stopper is correctly positioned and pressed down firmly.
Kubadilika rangi/Kufifia: While designed to resist fading, extreme exposure to harsh chemicals or prolonged direct sunlight (unlikely for a sink component) could potentially affect the finish. Refer to maintenance guidelines.

For issues not resolved by these steps, contact Franke customer support or a qualified plumber.

8. Vipimo

Kipengele	Maelezo
Nambari ya Mfano	WD-900
Chapa	Franke
Rangi	Matte Nyeusi
Nyenzo	Chuma na Plastiki
Kipenyo	4-1/2 inchi
Urefu	2-11/16 inchi
Vipimo vya Bidhaa	Inchi 4.5 x 4.5 x 2.06
UPC	612986090823

9. Udhamini na Msaada

The Franke WD-900 Colorline Garbage Disposal Flange Kit is covered under Franke's dhamana ya mwaka 1. This warranty typically covers manufacturing defects and material flaws under normal use.

For warranty claims, technical assistance, or further support, please contact Franke customer service. Keep your proof of purchase for warranty validation.

Contact information for Franke can typically be found on their official webtovuti au ufungaji wa bidhaa.

	Franke Sinks: Anwani za Ulimwenguni na Mwongozo wa Usakinishaji Pata maelezo ya mawasiliano ya sinki la Franke kitchen duniani kote na ufikie mwongozo wa usakinishaji na matengenezo, ikijumuisha maelezo ya bidhaa ya Franke Maris MRX 110-40.
	Ufungaji wa Franke Sinks na Mwongozo wa Mtumiaji Ufungaji wa kina na mwongozo wa mtumiaji kwa sinki za Franke, zinazofunika mifano mbalimbali na aina za ufungaji. Inajumuisha miongozo ya usalama, maagizo ya utunzaji, na maelezo ya mawasiliano ya kimataifa.
	FRANKE Kitupa Taka za Chakula TE-50, TE-75, TE-75S, TE-125, TE-125BF Mwongozo wa Mtumiaji na Usakinishaji. Mwongozo wa kina wa mtumiaji na usakinishaji wa Watupaji Taka za Chakula za FRANKE, mifano ya TE-50, TE-75, TE-75S, TE-125, na TE-125BF. Inashughulikia usalama, vipengele, usakinishaji, uendeshaji, utatuzi wa matatizo, matengenezo, na utupaji.
	Mwongozo wa Ufungaji wa Franke Trendline Plus 70 Range Hood Mwongozo wa kina wa usakinishaji wa kofia ya masafa ya Franke Trendline Plus 70, unaohusu tahadhari za usalama, utambuzi wa sehemu, na maagizo ya hatua kwa hatua ya usanidi kwa ajili ya uingizaji hewa bora wa jikoni. Mfano: 321.0536.200.
	Franke Active L Twist Pull-Out Faucet Parts Diagram and Information Detailed parts list and diagram for the Franke Active L Twist pull-out kitchen faucet (model 115.0669.769), featuring 2 jets in matte black. Includes component numbers and validation date.
	Franke FST PLUS BK 608 Matte Black Built-in Kitchen Hood \| Model 305.0717.355 Detailed specifications and features for the Franke FST PLUS BK 608 matte black built-in kitchen hood, including dimensions, energy efficiency, performance data, and installation details.

Franke WD-900