Mwongozo wa Mtumiaji wa Mashine ya Kuchonga Laser ya ATOMSTACK A12 Pro

1. Utangulizi

This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

Maonyo ya Usalama:

Always wear UV-filtering eye protection when operating the laser engraver.
Ensure proper ventilation to dissipate fumes and smoke generated during engraving/cutting.
Usiache mashine bila tahadhari wakati wa operesheni.
Weka vifaa vinavyoweza kuwaka mbali na eneo la kazi.
Jifahamishe na eneo la kitufe cha kusimamisha dharura.

2. Yaliyomo kwenye Kifurushi

Thibitisha kuwa bidhaa zote zilizoorodheshwa hapa chini zimejumuishwa kwenye kifurushi chako:

ATOMSTACK A12 Pro Laser Engraving Machine and accessories

Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.

ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
Kichwa cha Laser
Adapta ya Umeme (24V, 5A)
Cable ya Nguvu
Kebo ya USB (Aina-C)
Goggles (UV-filtering eye protection)
Fixed Focus Lens
Mwongozo wa Mtumiaji
Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
Flash Drive
Antena ya WiFi
Silicone Hose (air hose)
Wire Anchor
Clamp
100*30 lint free cloth
Kitelezi
Badili kitufe

3. Mwongozo wa Kuweka

The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:

Unboxing: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.
Install the Slider: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
Install the Laser Head: Mount the laser head onto the slider. Ensure it is firmly attached.
Install the WiFi Antenna: Screw the WiFi antenna into its port on the machine's side.
Install Tubing and X-axis Link Lines: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
Unganisha Nishati na USB: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
Washa: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.

Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.

4. Maagizo ya Uendeshaji

4.1 Udhibiti wa Programu

The ATOMSTACK A12 Pro supports multiple control methods:

ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
LightBurn & LaserGRBL: Traditional PC software for advanced users.
ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.

Diverse control methods for ATOMSTACK A12 Pro

Kielelezo 4.1: Zaidiview of the various software and app control options for the laser engraver.

4.2 Mchakato wa Kuchonga

Uwekaji Nyenzo: Place your material flat on the engraving bed.
Marekebisho ya Kuzingatia: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.

Cross positioning system for precise engraving

Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.

Mipangilio ya Programu: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
Anza Kuchora: Initiate the engraving process from the software.

5. Features & Capabilities

Ubunifu wa Unibody: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
High Speed & Precision: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.

Amazing working speed of ATOMSTACK A12 Pro

Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.

Laser yenye nguvu: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.

Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.

Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.

Diverse materials compatible with ATOMSTACK A12 Pro

Kielelezo 5.3: Kutamples of various materials that can be engraved or cut by the machine.

Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
Usalama Ulioimarishwa: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.

6. Matengenezo

Kusafisha Lensi: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
Rail Lubrication: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser head.
Uondoaji wa uchafu: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
Sasisho za Firmware: Check the official ATOMSTACK website periodically for firmware updates to ensure your machine has the latest features and bug fixes.

7. Utatuzi wa shida

Tatizo	Sababu inayowezekana	Suluhisho
Mashine haiwashi	Power cable loose; Emergency stop engaged; Key not turned.	Check power connections; Disengage emergency stop; Turn key to ON.
Laser not firing/weak output	Lens dirty; Incorrect focus; Low power setting in software.	Clean laser lens; Adjust focus; Increase power setting.
Engraving is distorted/inaccurate	Loose belts/rails; Material shifting; Incorrect software settings.	Check and tighten belts/rails; Secure material; Verify software settings.
Programu haiunganishi kwa mashine	USB cable issue; Driver not installed; Incorrect COM port.	Try different USB port/cable; Install drivers; Select correct COM port in software.

8. Vipimo

Vipimo vya Bidhaa: Inchi 23.22 x 23.22 x 7.08
Uzito wa Kipengee: Pauni 18.74
Nguvu ya Pato la Laser: 12000mW (12W)
Nguvu ya Mashine: 50W
Ukubwa wa eneo la Laser: 0.05*0.06mm
Kasi ya Kuchora: Hadi 600 mm / s
Usahihi: Within 0.004 inches
Muunganisho: USB, WiFi (via Mobile APP)
Programu Inayotumika: ATOMSTACK PC Software, LightBurn, LaserGRBL
Mtengenezaji: Shenzhen AtomStack Technologies Co., Ltd.
Nchi ya Asili: China

9. Udhamini na Msaada

Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK webtovuti.

Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.

	Mwongozo wa Mtumiaji wa Programu ya AtomStack Studio Mwongozo wa kina wa mtumiaji wa programu ya AtomStack Studio, upakuaji unaofunika, usakinishaji, unganisho la kifaa, mipangilio, muundo wa mradi, mipangilio ya vigezo vya kuchonga, mipango ya nyenzo, harakati ya leza, eneo la kuchonga kabla.view, kuanza kuchora, kukamilisha miradi, urekebishaji wa kamera, na majaribio ya nyenzo.
	Mwongozo wa Ufungaji wa Mchoro wa Laser wa ATOMSTACK P7 Mwongozo wa kina wa usakinishaji wa Mchongaji wa Laser wa ATOMSTACK P7, unaoelezea tahadhari za usalama, hatua za kuunganisha na miongozo ya matumizi ya bidhaa. Jifunze jinsi ya kusanidi na kuendesha mashine yako ya kuchonga laser.
	Mwongozo wa Mtumiaji wa AtomStack Swift: Mwongozo wa Usanidi, Usakinishaji, na Programu Mwongozo kamili wa mtumiaji wa mchoraji wa leza wa AtomStack Swift, unaohusu orodha ya vipuri, usakinishaji, usanidi wa programu na AtomStack Studio na LightBurn, na mwongozo wa mtumiaji. Unajumuisha utatuzi wa matatizo na taarifa za mawasiliano.
	Mwongozo wa Mtumiaji wa Kichoraji cha Laser cha ATOMSTACK A5/A10/A20 PRO V2 Mwongozo kamili wa mtumiaji wa wachoraji wa leza wa ATOMSTACK A5, A10, na A20 PRO V2, unaohusu usalama, maagizo ya usanidi, usanidi wa programu (LightBurn, LaserGRBL), uendeshaji, matengenezo, na utatuzi wa matatizo.
	Mwongozo wa Mashine ya Kuchonga Laser ya ATOMSTACK A5 Pro Mwongozo kamili wa mtumiaji wa mashine ya kuchonga kwa leza ya ATOMSTACK A5 Pro, unaohusu usalama, usakinishaji wa programu (LaserGRBL na LightBurn), uendeshaji, na utatuzi wa matatizo.
	Mwongozo wa Mtumiaji wa Kifaa cha Kusaidia Hewa cha ATOMSTACK Mwongozo wa mtumiaji wa Kiti cha Usaidizi wa Hewa cha ATOMSTACK, ukitoa usakinishaji, matumizi na tahadhari kwa mashine za kuchonga leza za ATOMSTACK.

ATOMSTACK A12 Pro