Mwongozo wa Maelekezo ya Raki ya Seva ya Tecmojo 6U ya Kupachika Ukuta

Utangulizi

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Tecmojo 6U Wall Mount Server Rack. This open frame network rack is designed to securely house 19-inch computer, AV, data, IT, and media equipment. Its robust construction from cold rolled steel ensures durability, while the open frame design facilitates efficient heat dissipation. The unique 180-degree swing gate offers convenient access to the rear of your equipment for cabling and servicing.

Vipengele muhimu ni pamoja na:

Vipimo: 6U Wall Mount Rack, 16-inch apart mounting holes; 18-inch Depth; Square hole or tapped hole installation can be switched with each other.
Imara na Inadumu: Network rack wall mount is made from Cold Rolled Steel; Static load bearing 110 lbs (50kg), sliding load 55 lbs (25kg); Electrostatic powder coat preventing rust and corrosion.
Vipengele vya Kubuni: Open Frame structure of wall mount server rack, easy to move and heat dissipation; 180 degrees swing gate for rear cable access from both sides.
Inatumika Sana: Server rack fits for 19-inch equipment; Suitable choice of data rack and audio rack; Various specifications including height of 6U, 9U, 12U, 15U, 18U, depth of 18-inch and 24-inch; Compliant EIA/ECA-310-E.
Ufungaji Rahisi: Provided with corresponding accessories, instructions, drilling hole template, and video explanation for reference.

Kuweka na Kukusanya

Follow these steps for proper assembly and installation of your Tecmojo Wall Mount Server Rack. A drilling hole template and all necessary accessories are included to facilitate the process.

Vipengee vilivyojumuishwa

Product includes instruction manual, cross screws, cage nuts, and wall mounting screws. — Picha: Juuview of included accessories, including screws, cage nuts, and the instruction manual.

Ensure all components listed in the manual are present before beginning assembly.

Hatua za Mkutano

For a visual guide, please refer to the assembly demonstration video below.

Video: Tecmojo Swing Gate Wall Mount Rack Assembly Demonstration. This video provides a step-by-step guide on how to assemble the rack components.

Fungua na Uthibitishe: Carefully unpack all components and verify against the included parts list. Locate the mounting hole drilling template.
Assemble Side and Front Frames: Use the provided M5 and M3 screws to securely attach the side frames to the front beams. Ensure all connections are tight.
Install Hinge Fittings: Insert the two white hinge fittings at the top and two black hinge fittings at the bottom of the main frame structure. These fittings are crucial for the swing gate mechanism.
Attach Front Gate: Carefully push the front gate into the installed hinge fittings until it is securely in place. Test the swing mechanism to ensure smooth operation.

Uwekaji Ukuta

The rack is designed for standard 16-inch stud placement. Use the provided drilling template to mark the precise locations for mounting on your wall.

Drilling hole template and mounting hole spacing of 16 inches. — Image: Drilling hole template and illustration of 16-inch mounting hole spacing for standard stud placement.

Once the holes are marked and drilled, securely mount the rack to the wall using appropriate hardware for your wall type. For optimal stability, it is recommended to mount into wall studs. The static load bearing capacity is 110 lbs (50kg).

Maagizo ya Uendeshaji

Your Tecmojo Wall Mount Server Rack is designed for ease of use and accessibility.

Kupakia Vifaa

The rack is compatible with 19-inch equipment. The rack rails can accommodate both square and tapped holes, providing flexibility for various mounting needs. Use appropriate cage nuts and screws (if using square holes) or threaded screws (if using tapped holes) to secure your devices.

Rack rails designed to accommodate both square and tapped holes. — Image: Detail showing the rack rails with options for both square and tapped holes.

Utilizing the Swing Gate

The unique 180-degree dual-hinged swing gate allows for convenient rear cable access and servicing from both sides of the rack. This feature is particularly useful for managing complex cable setups or performing maintenance without fully dismounting equipment.

Tecmojo 6U Wall Mount Server Rack with its swing gate open, demonstrating rear access. — Image: The Tecmojo server rack with its swing gate fully open, illustrating the 180-degree access for cabling and maintenance.

Video: Swing Gate Wall Mount Rack Feature Demonstration. This video highlights the functionality of the 180-degree swing gate for easy rear access.

Matengenezo

To ensure the longevity and optimal performance of your Tecmojo Wall Mount Server Rack, regular maintenance is recommended:

Kusafisha: Periodically wipe down the rack with a soft, damp cloth to remove dust and debris. Avoid abrasive cleaners that could damage the electrostatic powder coat finish.
Ukaguzi wa vifaa: Every 6-12 months, inspect all screws and mounting hardware to ensure they remain tight. Loose connections can affect stability and load bearing capacity.
Swing Gate Check: Verify that the swing gate operates smoothly and that the hinge fittings are free from obstruction or damage.
Usambazaji wa Mzigo: Ensure that equipment is evenly distributed within the rack to maintain balance and prevent undue stress on the mounting points.

Kutatua matatizo

If you encounter any issues with your Tecmojo Wall Mount Server Rack, consider the following common solutions:

Tatizo	Sababu inayowezekana	Suluhisho
Rack feels unstable after mounting.	Improper wall mounting; screws not fully tightened; not mounted into studs.	Ensure the rack is mounted into wall studs using appropriate hardware. Tighten all mounting screws securely. Re-check the drilling template alignment.
Swing gate is stiff or does not open smoothly.	Hinge fittings are not properly seated or are obstructed; excessive weight on the gate.	Check that the hinge fittings are correctly inserted and free of debris. Ensure the rack is not overloaded beyond its sliding load capacity of 55 lbs (25kg) when opening the gate.
Equipment does not fit the rack rails.	Incorrect equipment size (not 19-inch standard); using wrong type of mounting hardware (e.g., tapped screws for square holes).	Verify your equipment is 19-inch rack-mountable. Ensure you are using the correct screws and cage nuts (if applicable) for the rail type (square or tapped holes).

Vipimo

Detailed specifications for the Tecmojo 6U Wall Mount Server Rack:

Diagram showing dimensions and key specifications of the Tecmojo 6U Wall Mount Server Rack. — Image: Key dimensions and specifications of the 6U Wall Mount Server Rack.

Sifa	Thamani
Mfano	6U/18" Depth (New)
Vipimo vya Bidhaa	18"D x 20"W x 15.6"H (inchi 18 x 20 x 15.62)
Uzito wa Kipengee	Pauni 22.4
Nyenzo	Alloy Steel (Cold Rolled Steel)
Rangi	Nyeusi
Static Load Bearing Capacity	Lebo 110 (50kg)
Sliding Load Capacity (Swing Gate)	Lebo 55 (25kg)
Nafasi ya Mashimo ya Kuweka	16 inches apart
Rack Unit (U) Height	6U (also available in 9U, 12U, 15U, 18U)
Kuzingatia	EIA/ECA-310-E Inafuata
Nchi ya Asili	China

Various U-heights available for Tecmojo wall mount racks. — Image: Illustration of the various U-heights available for Tecmojo wall mount racks.

Udhamini na Msaada

Tecmojo products are manufactured with high-quality materials and undergo rigorous quality control. For specific warranty details, please refer to the documentation included with your purchase or contact Tecmojo customer support directly.

For additional support, product information, or to explore other IT storage solutions, please visit the official Tecmojo store:

Tembelea Duka la Tecmojo kwenye Amazon

	Tecmojo Swing Gate Wall-Mount Rack Mwongozo wa Maelekezo Mwongozo wa kina wa Tecmojo Swing Gate Wall-Mount Rack, maelezo ya kina, maunzi, vifuasi, na usakinishaji wa hatua kwa hatua kwa ajili ya kupachika vifaa salama.
	Tecmojo 19in Desktop Open Frame 2 Post Rack Square Hole Mwongozo wa Maagizo Mwongozo wa maagizo ya Tecmojo 19in Desktop Open Frame 2 Post Rack Square Hole, inayoelezea maonyo ya usalama, vipimo vya bidhaa, na maagizo ya hatua kwa hatua ya kuunganisha.
	Mwongozo wa Maagizo ya Rack ya Seva ya Tecmojo Steel 2-Post Mwongozo wa maelekezo kwa ajili ya rack ya seva ya chuma yenye mashimo 2 ya Tecmojo, yenye maelezo ya kina, sehemu, na hatua za kuunganisha kwa uwezo mbalimbali wa U.
	Tecmojo Open Frame Rack kwa Seva na AV Gear - Mwongozo wa Maagizo Mwongozo wa kina wa maagizo ya Tecmojo ya Open Frame Racks kwa Seva na AV Gear. Inajumuisha vipimo, miongozo ya usalama, na maagizo ya mkusanyiko wa miundo 11120121, 11120122 na 11120123.
	TecMOJO Mwongozo wa Maelekezo wa Mabano ya Kuweka Ukutani 350 Mwongozo wa maagizo wa TecMOJO Baketi ya Kuweka Ukutani 350, inayoelezea maonyo ya usalama, vipimo, mwongozo wa usakinishaji, vifuasi na vikwazo vya dhima ya bidhaa.
	TecMOJO Wall-Mount Rack Instruction Manual - Installation Guide Comprehensive instruction manual for TecMOJO Wall-Mount Racks. Includes safety guidelines, specifications, and step-by-step installation instructions for models 11130202, 11130204, 11130207, and 11130211.

Tecmojo 6U/18" Depth (New)