Miongozo+

PAL Lighting 64-PCR-3D-120

PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

Model: 64-PCR-3D-120

Brand: PAL Lighting

1. Utangulizi

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Taarifa za Usalama

ONYO: Kushindwa kufuata maagizo haya ya usalama kunaweza kusababisha moto, mshtuko wa umeme, jeraha, au uharibifu wa bidhaa au mali.

  • Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
  • Ufungaji lazima ufanywe na fundi umeme aliyehitimu na kwa mujibu wa kanuni zote za umeme za ndani na kitaifa.
  • Do not operate the transformer if it has been damaged in any way.
  • Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
  • Thibitisha kuwa ujazo wa usambazajitage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
  • Do not exceed the maximum output power of 120 Watts.

3. Yaliyomo kwenye Kifurushi

Please verify that all items listed below are present and undamaged in your package:

  • 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
  • 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
  • Betri 2 x AAA (kwa udhibiti wa mbali)
PAL 120W Multi Color Dual Zone Remote Control Transformer with PCZ-2 Remote and AAA Batteries

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Bidhaa Imeishaview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

  • Uingizaji Voltage: 100-240V AC, 50/60Hz
  • Nguvu ya Ugavi: 125 Watts
  • Nguvu ya Pato: 120 Watts (24V DC)
  • Ukadiriaji wa IP: IP65 (Inazuia vumbi na kulindwa dhidi ya ndege za maji)
  • Vyeti: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Kuweka na Kuweka

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

  1. Kupachika: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
  2. Wiring ya Kuingiza: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
  3. Wiring za Pato: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
  4. Betri za Kidhibiti cha Mbali: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
  5. Washa: Mara miunganisho yote ikiwa salama na kuthibitishwa, rejesha nguvu kwenye kivunja mzunguko.

6. Maagizo ya Uendeshaji

6.1. Kuoanisha Kidhibiti cha Mbali

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

  1. Hakikisha transfoma imewashwa.
  2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
  3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

  • Washa/ZIMWA: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
  • Uchaguzi wa Rangi: Use the color touch wheel to select desired static colors.
  • Udhibiti wa Mwangaza: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
  • Uteuzi wa Hali: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
  • Udhibiti wa Eneo: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Matengenezo

  • Kusafisha: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ukaguzi: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
  • Ubadilishaji wa Betri: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8. Utatuzi wa shida

TatizoSababu inayowezekanaSuluhisho
No power to lightsNo AC input power; Loose wiring; Faulty transformerCheck circuit breaker; Verify all wiring connections; Contact support if transformer is faulty.
Kijijini hakijibuDead batteries; Remote not paired; ObstructionReplace batteries; Re-pair remote (see Section 6.1); Ensure clear line of sight.
Taa zinamulika au hafifuOverloaded circuit; Loose connections; Faulty LED fixtureReduce load (ensure total wattage is below 120W); Check wiring; Test individual fixtures.

9. Vipimo

KipengeleVipimo
Mfano64-PCR-3D-120
Vipimo vya BidhaaInchi 12.5 x 7.3 x 5.3
Ugavi Voltage100-240V AC, 50/60Hz
Ugavi wa Nguvu125 Watts
Nguvu ya Pato120 Watts (24V DC)
Ukadiriaji wa IPIP65
MtengenezajiPAL PRODUCTS, INC.
ASINB0CSBSTC8W
Tarehe ya Kwanza InapatikanaJanuari 14, 2024

10. Udhamini na Msaada

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webtovuti au ufungaji wa bidhaa.

Nyaraka Zinazohusiana - 64-PCR-3D-120

Kablaview PAL Lighting EvenGlow PCR-2Z LED Light Controller - Multi-Color Transformer for Pools & Spas
Discover the PAL EvenGlow PCR-2Z LED Light Controller, a multi-color remote control transformer with OEM cloning and optional Wi-Fi for pools and spas. Control millions of colors, brightness, and set timers for your pool lighting.
Kablaview Mfululizo wa PAL TREO MAX PLUS Mwanga wa Dimbwi la Nichless LED - Maelezo na Ufungaji wa UL676
Ufafanuzi wa kina, mwongozo wa kuagiza, na usakinishaji juuview kwa ajili ya Mfululizo wa PAL TREO MAX PLUS taa ya bwawa la kuogelea la LED Nichless 1.5-inch, UL676 iliyoidhinishwa kwa matumizi ya bwawa na spa.
Kablaview Vidhibiti vya Taa vya PAL: Sasisho za Bodi ya Udhibiti ya 3D na 3DMX yenye Nguvu Nyingi V3
Mwongozo kamili unaoelezea masasisho ya bodi ya udhibiti ya V3 kwa vidhibiti vya 3D na 3DMX vya PAL Lighting vyenye Nguvu Nyingi, unaohusu usanidi wa hali, mipangilio ya swichi ya dip, na uwezo wa kuandikia wa DMX kwa ajili ya utendaji ulioboreshwa.
Kablaview Mwongozo wa Marekebisho na Usanidi wa Bodi ya Udhibiti ya Vidhibiti vya Taa vya PAL V3
Mwongozo wa kina kuhusu masasisho ya ubao wa udhibiti wa Toleo la 3 kwa Vidhibiti vya Mwangaza vya PAL, ikiwa ni pamoja na modeli za Switch Mode/Cloner na 2DMX. Hushughulikia mipangilio ya dipswitch, uwezo wa kuandikiwa wa DMX, na viashiria vya programu.
Kablaview Kiputo cha Kuweka Saruji/Vinyl cha Kuweka Viputo cha PAL: Mwongozo wa Usakinishaji na Uendeshaji
This manual provides detailed installation and operation instructions for the PAL Lighting Evenglow Multi Color LED Bubbler, designed for both concrete/gunite and vinyl/fiberglass swimming pools. It covers safety precautions, preparation steps, installation procedures for different pool types, controller setup, troubleshooting common issues, and replacement parts information.
Kablaview Mwongozo wa Ufungaji wa Mwanga wa PAL wa Bollard & Maagizo ya Usalama
Maagizo ya kina ya usakinishaji na miongozo ya usalama kwa Taa za PAL Lighting Bollard, ikijumuisha nambari za mfano 45-PAL-GL9 mfululizo na viendeshi vya PAL PCR-1Z/PCR-2Z. Jifunze jinsi ya kusakinisha na kuweka waya kwenye taa zako za bollard kwa usalama.