Utangulizi
This manual provides detailed instructions for the installation, operation, and maintenance of your ARES WING Desk Monitor Mount (Model GDT1003LWH). Please read this manual thoroughly before installation and use to ensure proper function and safety. This monitor mount is designed to support a single monitor, compatible with screens ranging from 17 to 49 inches and weighing between 4.4 to 44 lbs.
Taarifa za Usalama
- Hakikisha vipengele vyote vipo na havijaharibika kabla ya kuviunganisha. Usitumie ikiwa sehemu yoyote haipo au ina kasoro.
- Verify that your monitor's weight and size are within the specified limits (4.4-44 lbs, 17-49 inches). Exceeding these limits can result in instability and damage.
- Confirm your monitor has compatible VESA mounting holes (75x75mm or 100x100mm). If not, a separate VESA adapter is required.
- Ensure your desk thickness is compatible with the chosen mounting method (C-clamp: 0.39-3.34 inches; Grommet: 0.39-1.8 inches).
- Adjust the gas spring tension according to your monitor's weight kabla attaching the monitor to prevent sudden drops or difficulty in adjustment.
- Weka watoto na wanyama wa kipenzi mbali wakati wa ufungaji.
- Usikaze skrubu sana, kwani hii inaweza kusababisha uharibifu.
- For any issues or concerns, contact ARES WING customer support.
Yaliyomo kwenye Kifurushi
Please check the package to ensure all the following components are included:
- Kufuatilia Bunge la Silaha
- Dawati Clamp (C-clamp)
- Kituo cha Kuweka Grommet
- Sahani ya VESA
- Kifaa cha Vifaa (skrubu, mashine za kuosha, vidhibiti nafasi)
- Allen Wrenches
- Mwongozo wa Mtumiaji (hati hii)
Kuweka na Kuweka
1. Check Monitor Compatibility
Before proceeding, ensure your monitor meets the following criteria:
- Muundo wa VESA: 75x75mm or 100x100mm.
- Ukubwa wa Skrini: 17" to 49".
- Uwezo wa Uzito: 4.4 lbs to 44 lbs.
Figure 1: Monitor and Desktop Compatibility Check
For monitors without VESA holes, a separate VESA adapter is required. Some Samsung G9 monitors may come with a VESA adapter; please check your monitor's documentation.
Figure 2: VESA Hole Check and Adapter Preparation
2. Chagua Mbinu ya Kuweka
The ARES WING monitor mount supports two installation methods: C-clamp and Grommet mount.
- C-Clamp: Suitable for desk thickness between 0.39 inches (10mm) and 3.34 inches (85mm).
- Kipachiko cha Grommet: Suitable for desk thickness between 0.39 inches (10mm) and 1.8 inches (45mm). Requires an existing hole in your desk.
3. Install the Desk Mount
Follow the instructions provided with your mount to securely attach the base to your desk using either the C-clamp or grommet method. Ensure the mount is stable before proceeding.
4. Kurekebisha Mvutano wa Gesi ya Chemchemi
It is crucial to adjust the gas spring tension to match your monitor's weight kabla attaching the monitor. This prevents the arm from springing up or sagging.
- Use the provided Allen wrench to adjust the tension screw on the arm.
- Geuka mwendo wa saa for heavier monitors (to increase tension).
- Geuka mwendo wa saa for lighter monitors (to decrease tension).
- Adjust until the arm can hold its position freely when moved without a monitor attached.
Figure 3: Gas Spring Tension Adjustment
5. Attach Monitor to VESA Plate
Secure the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
6. Weka Kichunguzi Kwenye Mkono
Carefully slide the VESA plate with the attached monitor onto the monitor arm's VESA head. Ensure it clicks into place or is secured with any locking mechanism provided.
Figure 4: Monitor Mounted on ARES WING Arm
Maagizo ya Uendeshaji
1. Kurekebisha Nafasi ya Monitor
The ARES WING monitor arm offers full motion capabilities for optimal ergonomic positioning:
- Marekebisho ya Urefu: The arm allows vertical movement to raise or lower your monitor to the desired eye level. The height can be adjusted from 8.5 inches to 19.7 inches.
- Teke: Tilt your monitor +50° upwards or -20° downwards to reduce glare and find the perfect viewpembe.
- Sogeza: Swivel the monitor ±90° left or right to share your screen or adjust for different tasks.
- Mzunguko: Zungusha kifuatiliaji kwa digrii 360 ili kubadilisha kati ya mwelekeo wa mandhari na picha.
Figure 5: Full Motion Adjustment Capabilities
Figure 6: Tilting Ultrawide Monitors
2. Udhibiti wa Taa ya RGB
The monitor arm features integrated RGB lighting with 20 dynamic lighting effects. To control the lighting:
- Connect the USB cable from the monitor arm to a USB port on your computer or a USB power adapter.
- Locate the light control button on the base of the monitor arm.
- Bonyeza na ushikilie the button for approximately 2-3 seconds to turn the RGB lighting ON or OFF.
- Bonyeza kwa ufupi to cycle through the 20 different lighting modes (Color Cycle, Chasing, Static, Wave, etc.).
- The lighting will remember the last mode used when turned back on.
Figure 7: RGB Lighting Control
3. Usimamizi wa Cable
Utilize the integrated cable management channels on the arm to route your monitor and power cables. This helps maintain a clean and organized workspace.
Matengenezo
- Kusafisha: Futa mkono wa kifuatiliaji kwa kutumia laini, damp kitambaa. Epuka visafishaji abrasive au vimumunyisho vinavyoweza kuharibu umaliziaji.
- Ukaguzi wa Mara kwa Mara: Mara kwa mara angalia skrubu na miunganisho yote ili kuhakikisha kuwa zinasalia kuwa ngumu na salama. Kaza tena ikiwa ni lazima.
- Chemchemi ya Gesi: The internal gas spring is designed for long-term durability (fatigue tested 20,000+ times). No specific maintenance is required for the gas spring itself, but ensure its tension is correctly set for your monitor's weight.
Kutatua matatizo
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Monitor arm sags or won't stay up. | Mvutano wa chemchemi ya gesi ni mdogo sana kwa uzito wa kufuatilia. | Increase gas spring tension by turning the adjustment screw counter-clockwise. Refer to "Adjust Gas Spring Tension" section. |
| Monitor arm is too stiff or won't move down. | Mvutano wa chemchemi ya gesi ni juu sana kwa uzito wa kufuatilia. | Decrease gas spring tension by turning the adjustment screw clockwise. Refer to "Adjust Gas Spring Tension" section. |
| RGB lighting does not turn on. | USB cable not connected or button not pressed correctly. | Ensure USB cable is securely connected. Press and shika the light control button for 2-3 seconds to activate. |
| Monitor wobbles or is unstable. | Mount not securely fastened to desk or VESA plate not tight. | Check desk clamp/grommet mount for tightness. Ensure VESA plate screws are securely fastened to the monitor and the plate is properly seated on the arm. |
| Monitor cannot tilt smoothly. | Tilt mechanism screw is too tight. | Loosen the tilt adjustment screw slightly until smooth tilting is achieved. Refer to Figure 6. |
Vipimo
| Nambari ya Mfano | GDT1003LWH |
| Nyenzo | Alumini, Chuma |
| Utangamano wa VESA | 75x75mm, 100x100mm |
| Utangamano wa Ukubwa wa Skrini | 17 - 49 inches (flat and curved monitors) |
| Uzito Uwezo | Pauni 4.4 - 44 (kilo 2 - 20) |
| Safu ya Marekebisho ya Urefu | inchi 8.5-19.7 |
| Pembe ya Kuinamisha | +50° / -20° |
| Pembe ya Kuzunguka | ±90° |
| Mzunguko | 360° |
| Desktop Thickness (C-Clamp) | Inchi 0.39 - 3.34 (milimita 10 - 85) |
| Desktop Thickness (Grommet) | Inchi 0.39 - 1.8 (milimita 10 - 45) |
| Mwangaza wa RGB | 20 dynamic lighting effects |
Udhamini na Msaada
ARES WING provides a Udhamini wa mwaka 3 wa Mtengenezaji for this product. For any questions, technical assistance, or warranty claims, please contact ARES WING customer support through the retailer where you purchased the product or visit the official ARES WING webtovuti kwa maelezo ya mawasiliano.
Kwa habari zaidi na usaidizi, unaweza kutembelea ARES WING Store on Amazon.
