Mwongozo wa Mtumiaji wa Kipima Kebo ya Mtandao cha NOYAFA NF-859GS

1. Utangulizi

The NOYAFA NF-859GS is a multi-functional network cable tester designed for comprehensive network and telephone line inspection. It integrates various testing capabilities including Power over Ethernet (PoE) detection, RJ45 and RJ11 cable testing for CAT5, CAT5E, CAT6, and CAT6A cables, continuity detection, cable length measurement, and cable tracking. This manual provides detailed instructions for the safe and effective operation of your device.

2. Taarifa za Usalama

Please read all safety warnings and instructions carefully before using this product to prevent electric shock, fire, or injury. Keep this manual for future reference.

• Usitumie kifaa karibu na maji au katika damp mazingira.
• Ensure the device is powered off before connecting or disconnecting cables.
• Usijaribu kurekebisha au kurekebisha kifaa mwenyewe. Rejelea huduma zote kwa wafanyikazi waliohitimu.
• Use only specified accessories and power sources.
• Epuka kuweka kifaa kwenye joto kali au jua moja kwa moja.
• Always wear appropriate personal protective equipment when working with electrical systems.

3. Yaliyomo kwenye Kifurushi

Thibitisha kwamba vitu vyote vipo na viko katika hali nzuri wakati wa kufungua:

• NF-859GS Main Tester Unit
• NF-859GS Receiver Unit
• RJ45 Adapter Cable
• RJ11 Adapter Cable
• Alligator Clip Cable
• Mwongozo wa Mtumiaji
• Kifuko cha kubeba

4. Bidhaa Imeishaview

The NF-859GS consists of a main tester unit with an LCD display and control buttons, and a receiver unit for cable tracing and identification.

Kielelezo cha 4.1: NOYAFA NF-859GS Network Cable Tester main unit and receiver. The main unit features an LCD screen and navigation buttons, while the receiver unit has LED indicators for signal strength and cable identification.

4.1 Main Tester Unit

• Onyesho la LCD: Shows test results, cable status, length, and other relevant information.
• RJ45 Bandari: For testing Ethernet cables.
• RJ11 Bandari: For testing telephone lines.
• Vifungo vya Kudhibiti: Power, Left, Enter, Right, ESC for navigation and function selection.

4.2 Kitengo cha Mpokeaji

• Mwangaza wa Mawimbi: Indicates detected signal strength during cable tracing.
• RJ45 Bandari: For connecting the remote end of the cable during tracing or continuity tests.
• Viashiria vya LED: For displaying wire map results (e.g., open, short, cross).
• Marekebisho ya Unyeti: Dial to adjust the sensitivity for cable tracing.

5. Usanidi na Uendeshaji wa Msingi

5.1 Kuwasha / Kuzima

• To power on the main unit, press and hold the Nguvu kitufe.
• Ili kuzima, bonyeza na ushikilie Nguvu kitufe tena hadi onyesho lizime.

5.2 Urambazaji

• Tumia Kushoto na Sawa vitufe vya kupitia chaguo za menyu.
• Bonyeza kwa Ingiza button to confirm a selection or start a test.
• Bonyeza kwa ESC kitufe cha kurudi kwenye menyu iliyotangulia au kutoka kwa kitendakazi.

6. Njia na Vitendaji vya Uendeshaji

6.1 Network Cable Testing (RJ45, RJ11)

This function tests the continuity and wiring sequence of RJ45 (CAT5, CAT5E, CAT6, CAT6A) and RJ11 (CAT3) cables.

1. Connect one end of the cable to the RJ45 or RJ11 port on the main tester unit.
2. Connect the other end of the cable to the corresponding port on the receiver unit.
3. Select the "Continuity Test" or "Wire Map" function from the main menu.
4. Bonyeza Ingiza to start the test. The LCD will display the wiring status (e.g., straight-through, crossover, open, short).

6.2 Kipimo cha Urefu wa Kebo

Accurately measures the length of network cables (2.5-200 meters) and identifies fault distances.

1. Ensure the cable is disconnected from all network devices.
2. Connect one end of the cable to the RJ45 port on the main tester unit. The other end should be open.
3. Select the "Length Measurement" function from the main menu.
4. Bonyeza Ingiza to start the measurement. The LCD will display the cable length and any detected fault distances (e.g., open circuit, short circuit).

6.3 Upimaji wa PoE

Detects Power over Ethernet (PoE) presence, voltage, and standard (802.3af/at).

1. Connect the network cable from the PoE source to the RJ45 port on the main tester unit.
2. Select the "PoE Test" function from the main menu.
3. Bonyeza Ingiza. The display will show PoE voltage, polarity, and the PoE standard (IEEE 802.3af/at or non-standard).

6.4 Cable Tracking (Toner Function)

Locates and identifies specific cables within a bundle or wall.

1. Connect the cable to be traced to the RJ45 or RJ11 port on the main tester unit.
2. Select the "Scan" or "Cable Tracking" function on the main unit. Choose between "Normal Mode", "Anti-interference Mode", or "PoE Mode" as needed.
3. Turn on the receiver unit and adjust its sensitivity.
4. Move the receiver unit along the suspected cable path. The signal light and audible tone on the receiver will indicate the presence of the traced cable.

6.5 Port Flash

Helps locate the corresponding network port on a switch or router by causing its indicator light to flash.

1. Connect the network cable from the main tester unit's RJ45 port to an active port on a switch or router.
2. Select the "Port Flash" function from the main menu.
3. The main unit will send a signal that causes the connected port's indicator light on the switch/router to flash, allowing for easy identification. This function supports 10M/100M/1000M hubs/switches.

7. Matengenezo

• Kusafisha: Tumia kitambaa laini na kavu kusafisha kifaa. Usitumie visafishaji vya abrasive au vimumunyisho.
• Hifadhi: Store the device in its carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• Betri: If the device uses replaceable batteries (not specified, assuming internal rechargeable or standard AA/AAA), ensure they are charged or replaced as needed. Remove batteries if storing for extended periods to prevent leakage.

8. Utatuzi wa shida

9. Vipimo

10. Udhamini na Msaada

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official NOYAFA webtovuti. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.

For further assistance, you may contact NOYAFA customer service via their official channels. Please have your model number (NF-859GS) and purchase date ready.