1. Utangulizi
This manual provides essential information for the safe and efficient operation of your Artillery Sidewinder X3 Plus 3D Printer. Please read this manual thoroughly before operating the printer and keep it for future reference.
Figure 1.1: Artillery Sidewinder X3 Plus 3D Printer Overview
The Artillery Sidewinder X3 Plus is a high-speed FDM 3D printer designed for both beginners and experienced users, featuring a large build volume and advanced functionalities.
Tahadhari za Usalama
- Daima tumia kichapishi katika eneo lenye hewa ya kutosha.
- Do not touch the hot nozzle or heated bed during operation.
- Keep children and pets away from the printer while it is in use.
- Ensure the power supply is stable and correctly connected.
- Unplug the printer before performing any maintenance or cleaning.
2. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengele vyote vipo kwenye kifurushi:
- Artillery Sidewinder X3 Plus 3D Printer
- 4.3-inch full-color touch screen
- Cable ya Nguvu
- Tool Kit (e.g., wrenches, screwdrivers, spare nozzle)
- Kebo ya USB
- SD Card / USB Drive with sample models and software
- Filament Sample
3. Mwongozo wa Kuweka
3.1 Mkutano
The Artillery Sidewinder X3 Plus comes largely pre-assembled. Follow these steps to complete the setup:
Figure 3.1: Simplified Assembly Steps
The image illustrates the main assembly steps: 1. Attach the gantry to the base. 2. Secure the gantry. 3. Install the diagonal tie rods for stability. 4. Mount the filament holder. 5. Connect the touchscreen. 6. Connect the power cable.
- Ondoa kwa uangalifu printa na vipengele vyote kutoka kwenye kifungashio.
- Attach the gantry (upper frame) to the base unit using the provided screws.
- Connect the necessary cables between the gantry and the base, ensuring secure connections.
- Install the diagonal tie rods to enhance structural stability during printing.
- Mount the filament holder at the designated position.
- Connect the 4.3-inch full-color touchscreen to the printer.
- Ensure all screws are tightened and cables are properly routed and secured.
3.2 Initial Power-On and Interface
Once assembled, connect the power cable and turn on the printer. The 4.3-inch full-color touchscreen provides an intuitive interface for all printer functions.
3.3 Automatic Bed Leveling
The Sidewinder X3 Plus features a 7x7 (49-point) automatic bed leveling system for precise first layer adhesion.
Figure 3.2: Smart Auto Leveling System
The printer uses a 49-point advanced virtual heightmap calculation to ensure accuracy across the entire print bed, simplifying the leveling process for users.
- Navigate to the "Leveling" or "Auto-Level" option on the touchscreen.
- Initiate the automatic leveling process. The printer will probe multiple points on the print bed to create a mesh.
- Once completed, the printer is ready for printing. Minor Z-offset adjustments may be required for optimal first layer quality.
4. Maagizo ya Uendeshaji
4.1 Kupakia Filamenti
The printer is equipped with a Dual Gear Direct Drive Extruder for powerful and stable filament propulsion.
Figure 4.1: Dual-Gear Direct Extruder Mechanism
This extruder design ensures consistent and precise filament feeding, leading to smoother model surfaces and reliable printing.
- Weka kipande cha nyuzi kwenye kishikilia nyuzi.
- Preheat the nozzle to the recommended temperature for your filament type (e.g., PLA: 200°C, ABS: 240°C).
- Insert the filament into the extruder's intake hole until it is gripped by the gears.
- On the touchscreen, select the "Load Filament" option. The extruder will pull the filament through until it exits the nozzle.
- Once filament flows smoothly from the nozzle, loading is complete.
4.2 Kuanzisha Uchapishaji
The Sidewinder X3 Plus supports high-speed printing up to 300mm/s.
Figure 4.2: High-Speed Printing Capability
Achieve faster print times with the printer's optimized drivetrain and acceleration capabilities, significantly reducing project completion time.
- Prepare your 3D model using a compatible slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file to a USB drive or SD card.
- Insert the USB drive/SD card into the printer's designated slot.
- On the touchscreen, navigate to "Print" and select your desired G-code file.
- Confirm print settings and start the print. The printer will automatically preheat and begin printing.
4.3 Nozzle Auto-Cleaning
The printer features an auto-cleaning nozzle that supports printing up to 300°C, compatible with various filaments including PLA, TPU, PETG, ABS, and Nylon.
Figure 4.3: High-Temperature Auto-Cleaning Nozzle
The all-metal nozzle can reach temperatures up to 300°C, allowing for a wider range of filament materials. Its auto-cleaning function minimizes manual intervention.
The nozzle auto-cleaning function is integrated into the printer's startup routine or can be initiated manually via the touchscreen. This helps maintain optimal print quality by removing residual filament.
5. Matengenezo
5.1 Utunzaji wa jumla
- Keep the printer clean and free of dust and filament debris. Use a soft brush or compressed air.
- Angalia skrubu na miunganisho yote mara kwa mara kwa ajili ya kukazwa.
- Ensure the printer is placed on a stable, level surface. The metal diagonal tie rods contribute to stable printing by minimizing vibration.
Figure 5.1: Dual Z-axes and Dual Motors for Stability
The dual Z-axes and dual motors work in coordination to ensure stability and higher printing accuracy, reducing the need for frequent adjustments.
5.2 Print Platform Care
The PEI magnetic platform makes model removal easier.
Figure 5.2: Flexible PEI Magnetic Build Plate
The flexible PEI magnetic build plate allows for easy removal of printed models by simply bending the plate after it cools down.
- Safisha uso wa uchapishaji kwa pombe ya isopropili kabla ya kila uchapishaji ili kuhakikisha unashikilia vizuri.
- Avoid scratching the PEI surface with sharp tools.
- Allow the print bed to cool down before removing prints to prevent damage to the print or the surface.
5.3 Utunzaji wa Kitoaji na Nozo
- Periodically check the extruder gears for filament residue and clean as needed.
- If the nozzle becomes clogged, use the provided needle or a cold pull method to clear it. Refer to online resources for detailed instructions on cold pull.
- Ensure the hotend fan is clear of obstructions to prevent heat creep.
6. Utatuzi wa shida
Sehemu hii inashughulikia masuala ya kawaida ambayo unaweza kukutana nayo wakati wa operesheni.
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Filamenti haitoi nje | Nozo iliyoziba, nyuzi iliyokwama, halijoto isiyo sahihi. | Clean nozzle, untangle filament, verify temperature settings. |
| Mshikamano duni wa safu ya kwanza | Bed not level, dirty print surface, incorrect Z-offset. | Perform auto-leveling, clean print surface, adjust Z-offset. |
| Chapisho zinazojitenga na kitanda | Insufficient bed temperature, cooling too fast, poor adhesion. | Increase bed temperature, reduce cooling for first layers, ensure clean bed. |
| Kubadilisha tabaka | Loose belts, motor issues, excessive print speed. | Check and tighten belts, reduce print speed. |
| Printa inayotoa kelele zisizo za kawaida | Loose components, fan issues, motor grinding. | Inspect for loose parts, check fans, contact support if motor noise persists. |
For more detailed troubleshooting, refer to the official Artillery support resources or community forums.
7. Vipimo
Figure 7.1: Large Build Volume
The generous build volume of 11.8 x 11.8 x 15.7 inches provides ample space for larger prints and batch production.
Mchoro 7.2: Vipimo vya Jumla vya Bidhaa
The physical dimensions of the printer are 20 inches deep, 20 inches wide, and 26 inches high.
| Chapa | Silaha |
| Mfano | Sidewinder X3 Plus |
| Jenga Kiasi | Inchi 11.8 x 11.8 x 15.7 (300 x 300 x 400 mm) |
| Vipimo vya Bidhaa | Inchi 20 x 20 x 26 |
| Uzito wa Kipengee | Pauni 36.5 |
| Nyenzo | ABS, Metal |
| Kiwango cha Juu cha Joto la Nozzle | 300°C |
| Kasi ya Uchapishaji wa Juu | 300 mm/s |
| Aina ya Extruder | Dual Gear Direct Drive Extruder |
| Usawazishaji wa Kitanda | 7x7 (49-point) Automatic Bed Leveling |
| Filaments Sambamba | PLA, TPU, PETG, ABS, Nylon |
| Onyesho | Skrini ya Kugusa ya Inchi 4.3 ya Rangi Kamili |
8. Udhamini na Msaada
For warranty information, technical support, and service inquiries, please visit the official Artillery webtovuti au wasiliana na idara yao ya huduma kwa wateja. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai ya udhamini.
Official Artillery Store: Artillery Store on Amazon
