Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Bidhaa Imeishaview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Taarifa za Usalama

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• ONYO: Hatari ya mshtuko wa umeme. Kata umeme kwenye fyuzi au kivunja mzunguko kabla ya usakinishaji au ukarabati.
• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Do not install in wet locations or near flammable materials.
• Hakikisha ujazo wa usambazajitage is compatible with the luminaire's requirements (120-277V AC).
• Usirekebishe luminaire kwa njia yoyote.
• Handle with care to avoid damage to LED components.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vijenzi vyote vipo na havijaharibika wakati wa kufungua kifurushi:

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x Installation Guide (this document)
• Mounting Hardware (e.g., screws, anchors - inaweza kutofautiana kwa kifurushi)

4. Kuweka na Kuweka

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Tayarisha eneo la ufungaji: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Pointi za Kuweka alama: Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Sakinisha Maunzi ya Kuweka: Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Viunganisho vya Wiring:
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Funga miunganisho yote ya waya kwa kutumia nati au viunganishi vya waya vinavyofaa.
5. Secure the Luminaire: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Rejesha Nguvu: Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Maagizo ya Uendeshaji

This luminaire features field-selectable color temperature and lumen output settings.

• Uteuzi wa Joto la Rangi: Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• Kufifisha kwa V0-10: Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Matengenezo

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Kusafisha: Ondoa nguvu kabla ya kusafisha. Tumia laini, kavu, au d kidogoamp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• LEDs: The LEDs are integrated and do not require replacement.

7. Utatuzi wa shida

If you experience issues with your luminaire, refer to the following common problems and solutions:

Tatizo likiendelea baada ya kujaribu suluhu hizi, tafadhali wasiliana na usaidizi kwa wateja.

8. Vipimo

9. Taarifa za Udhamini

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webtovuti kwa sheria na masharti ya udhamini wa kina. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.

10. Msaada kwa Wateja

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Webtovuti: Visit the official Signify or Philips Lighting webtovuti kwa nyenzo za usaidizi, Maswali Yanayoulizwa Mara kwa Mara, na maelezo ya mawasiliano.
• Simu: Refer to the contact details provided on the product packaging or the manufacturer's webtovuti.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.