Utangulizi
The SmallRig AP-20 Carbon Fiber Tripod is a versatile and lightweight support system designed for photographers and videographers. It features a durable carbon fiber construction, a 360-degree detachable ball head, and a 2-in-1 design that allows it to function as both a tripod and a monopod. This manual provides detailed instructions for the proper setup, operation, and maintenance of your AP-20 tripod.
Taarifa za Usalama
- Ensure all locks are securely fastened before mounting equipment or moving the tripod.
- Do not exceed the maximum payload capacity of 26.5 lbs (12 kg).
- Avoid placing the tripod on unstable or slippery surfaces.
- Keep hands and fingers clear of moving parts, especially when extending or folding legs.
- Do not leave equipment unattended on the tripod in windy conditions.
Yaliyomo kwenye Kifurushi
Tafadhali thibitisha kuwa vitu vyote vifuatavyo vimejumuishwa kwenye kifurushi chako:
- SmallRig Carbon Fiber Tripod x 1
- Storage Package (Carrying Bag) x 1
- Mwongozo wa Mtumiaji x 1

Figure 1: Package Contents and Basic Specifications
Bidhaa Imeishaview
Familiarize yourself with the main components of your SmallRig AP-20 tripod.

Figure 2: SmallRig AP-20 Carbon Fiber Tripod

Mchoro 3: Sifa Muhimu na Vipengele

Figure 4: Ball Head Details
Sanidi
1. Kufungua Tripodi
- Release the leg locks on each leg.
- Extend the legs to your desired height. The 4-section legs feature quick release flip-locks for easy adjustment.
- Adjust the leg angles using the quick-adjustment buckles. The tripod offers three adjustable angles: 23°, 55°, and 85°.
- Ensure all leg locks and angle adjustments are securely fastened before use.

Mchoro 5: 3-Stage Support Angles
2. Kuambatanisha Kamera Yako
- Ensure the quick release plate is detached from the ball head.
- Securely attach your camera to the quick release plate using the 1/4"-20 screw.
- Slide the quick release plate with your camera into the ball head receiver until it clicks into place. Tighten any locking mechanisms on the ball head to secure the plate.
Maagizo ya Uendeshaji
1. Adjusting Tripod Height and Angle
The tripod's 4-section telescopic legs can be adjusted from a minimum height of 20 inches (51 cm) to a maximum height of 62.2 inches (158 cm) using the flip-locks. The leg angle adjustment buckles allow for quick changes between 23°, 55°, and 85° to adapt to various terrains and shooting requirements.

Figure 6: Height Adjustments
2. Kutumia Kichwa cha Mpira
The detachable ball head provides flexible camera positioning. Use the damping adjustment knob to control the tension of the ball joint, allowing for smooth 360° swivel and 90° tilt movements. The 360° horizontal scale on the ball head base assists in precise panoramic alignment.
3. Monopod Functionality
One of the tripod legs can be detached and combined with the center column and ball head to form a monopod. This is ideal for situations requiring quick mobility or when space is limited. To convert:
- Unscrew the leg with the foam grip from the tripod spider.
- Unscrew the ball head from the center column.
- Attach the ball head to the top of the detached leg.
- The monopod can extend up to 64.2 inches (163 cm).
4. Reversible Center Column for Low-Angle Shots
For extreme low-angle photography, the center column can be inverted:
- Unscrew the hook at the bottom of the center column.
- Remove the center column from the tripod spider.
- Reinsert the center column upside down into the tripod spider and tighten it.
- Attach your camera to the inverted column for ground-level perspectives.

Figure 7: Inverted Center Column Setup
5. Accessory Expansion
The tripod bracket includes 1/4"-20 threaded holes, allowing for the attachment of external accessories such as magic arms, mobile phone holders, or monitors.
Matengenezo
- Kusafisha: Futa tripod kwa kitambaa laini na kikavu baada ya kila matumizi. Kwa uchafu unaoendelea, tumia d kidogoamp kitambaa na sabuni laini, kisha kausha vizuri. Epuka kemikali kali.
- Hifadhi: Hifadhi tripod kwenye mfuko wake wa kubebea mahali pakavu na penye baridi mbali na jua moja kwa moja na halijoto kali.
- Upakaji mafuta: Moving parts are generally self-lubricating. Do not apply oil or grease unless specifically instructed by SmallRig support.
- Ukaguzi: Periodically check all screws, locks, and joints for tightness and wear. Tighten any loose screws with the provided hex key.
Kutatua matatizo
- Tripodi huhisi kutokuwa imara: Ensure all leg sections are fully extended and all flip-locks are securely closed. Verify that the leg angle adjustment buckles are engaged. Check that the quick release plate and camera are firmly attached to the ball head.
- Legs are difficult to extend/retract: Check for any debris or dirt in the leg sections. Clean as per maintenance instructions. If the issue persists, the leg tension screws may need minor adjustment (refer to manufacturer support if unsure).
- Ball head movement is not smooth: Hakikisha damping adjustment knob is not overtightened. Clean the ball head area to remove any dust or grit.
- Camera wobbles on ball head: Confirm the quick release plate is properly seated and locked. Ensure the camera is securely mounted to the quick release plate.
Vipimo
| Kipengele | Maelezo |
|---|---|
| Nambari ya Mfano | AP-20 (15787) |
| Nyenzo | Nyuzi za Carbon |
| Urefu wa Juu | Inchi 62.2 (sentimita 158) |
| Monopod Height | Inchi 64.2 (sentimita 163) |
| Urefu wa chini | Inchi 20 (sentimita 51) |
| Urefu Uliokunjwa | Inchi 15.8 (sentimita 40) |
| Uzito wa Kipengee | Pauni 2.6 (kilo 1.2) |
| Uwezo wa Upakiaji | Pauni 26.5 (kilo 12) |
| Sehemu za Mguu | 4 |
| Aina ya Kichwa cha Tripod | Ball Head (360° Swivel, 90° Tilt) |
| Quick Release Plate Compatibility | Arca-Uswisi inaendana |
Udhamini na Msaada
For warranty information, product registration, or technical support, please visit the official SmallRig webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai ya udhamini.
Rasmi wa SmallRig Webtovuti: www.smallrig.com





