HALO LCR 2-Inch Regressed Canless LED Downlight Instruction Manual

1. Bidhaa Imeishaview

The HALO LCR 2-inch Regressed Canless LED Downlight offers a sleek, recessed lighting solution without the need for traditional can housings. This versatile LED downlight is suitable for both indoor and covered outdoor spaces, featuring selectable color temperatures and dimmable functionality.

Sifa Muhimu:

• Canless design for easy installation.
• 6 selectable color temperatures (2700K-6500K).
• Dimmable down to 5% with most dimmers (0-10V and phase-cut).
• IC-rated for direct contact with insulation.
• Wet location listed for use in showers and covered outdoor areas.
• ENERGY STAR certified with a 50,000-hour lifespan.

2. Maagizo Muhimu ya Usalama

Read all instructions carefully before installation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• ONYO: Hatari ya mshtuko wa umeme. Kata umeme kwenye fyuzi au kivunja mzunguko kabla ya usakinishaji au ukarabati.
• Installation must be performed by a qualified electrician in accordance with national and local electrical codes.
• Do not install in areas with direct exposure to water spray unless specifically rated for such conditions.
• Hakikisha viunganisho vyote vya umeme ni salama na vimewekwa maboksi ipasavyo.
• Usibadilishe kifaa au vipengele vyake.
• Kifaa hiki hakikusudiwa kutumiwa na njia za dharura.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:

• HALO LCR 2-inch Regressed Canless LED Downlight
• Dereva wa mbali / Sanduku la Makutano
• Installation Hardware (e.g., spring clips, wire connectors)

4. Kuweka na Kuweka

The HALO LCR downlight is designed for easy installation in drywall or suspended ceilings without the need for a recessed housing or J-box.

Tools Required (suggested):

• Hole Saw (2.75 inches / 7 cm diameter)
• bisibisi
• Waya Strippers
• Mkanda wa Kupima
• Miwani ya Usalama

Ufungaji wa Hatua kwa Hatua:

1. Zima nguvu: Ensure power to the installation area is disconnected at the circuit breaker.
2. Cut ceiling hole: Use a 2.75-inch (7 cm) hole saw to cut a circular opening in the ceiling at the desired location.
3. Wire the junction box: Open the remote driver/junction box. Connect the building's electrical supply wires (hot, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Secure the junction box to a ceiling joist or other structural element if required by local codes, or simply place it through the ceiling hole.
4. Chagua Joto la Rangi (CCT): Before inserting the light fixture, locate the CCT selection switch on the remote driver/junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, 5000K, or 6500K).
5. Connect fixture to driver: Plug the connector from the downlight fixture into the corresponding receptacle on the remote driver/junction box.
6. Insert fixture: Gently push the spring clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling hole. The spring clips will secure the fixture in place.
7. Rejesha nguvu: Washa tena nguvu kwenye kikatiza mzunguko.

5. Maagizo ya Uendeshaji

Uchaguzi wa Joto la Rangi (CCT)

The HALO LCR downlight features a selectable color temperature switch located on the remote driver/junction box. This switch allows you to choose from six different color temperatures: 2700K (Soft White), 3000K, 3500K, 4000K, 5000K, and 6500K (Daylight). Make your selection before the final installation of the fixture into the ceiling.

Kufifia

This downlight is compatible with most standard dimmers, supporting both 0-10V and phase-cut dimming systems. It can be dimmed smoothly down to 5% of its full brightness. Ensure your dimmer switch is compatible with LED lighting for optimal performance.

6. Matunzo na Matengenezo

The HALO LCR LED Downlight is designed for long-term, maintenance-free operation with a rated lifespan of 50,000 hours, eliminating the need for bulb changes.

• To clean the fixture, ensure power is off and wipe gently with a soft, dry or slightly damp kitambaa. Usitumie visafishaji vya abrasive au vimumunyisho.
• Kagua kifaa mara kwa mara kwa dalili zozote za uharibifu au miunganisho iliyolegea.

7. Mwongozo wa Utatuzi

If the downlight is not functioning correctly, refer to the following common issues and solutions:

If issues persist, contact HALO customer support.

8. Maelezo ya Bidhaa

9. Udhamini na Msaada

The HALO LCR 2-inch Regressed Canless LED Downlight is backed by a Udhamini mdogo wa mwaka 5. Udhamini huu unashughulikia kasoro katika nyenzo na utengenezaji chini ya matumizi ya kawaida.

Usaidizi wa Wateja

For technical assistance, warranty claims, or further information, please contact HALO customer service. HALO products are designed, tested, and supported in the USA.

Visit the official HALO store for more products and information: HALO Store