GAOMON Full Size Velvet Button Tufted Bed Frame with Headboard

Utangulizi

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your GAOMON Full Size Velvet Button Tufted Bed Frame, Model SBH01DF. Please read this manual thoroughly before assembly and retain it for future reference.

Image: The GAOMON Full Size Velvet Button Tufted Bed Frame, featuring a grey velvet headboard and footboard with button tufting, supported by a gold-finished metal frame, shown in a bedroom setting.

Taarifa za Usalama

• Hakikisha sehemu zote zipo na hazijaharibiwa kabla ya kuanza mkusanyiko.
• Kusanya fremu ya kitanda kwenye uso laini na safi ili kuzuia mikwaruzo.
• Usikaze skrubu sana wakati wa kuunganisha ili kuepuka kuondoa nyuzi.
• Regularly check all connections to ensure they remain tight and secure.
• Usizidi uzani wa juu zaidi wa pauni 800.
• Weka sehemu ndogo mbali na watoto wakati wa mkusanyiko.

Orodha ya Sehemu

Kabla ya kuunganisha, hakikisha kwamba vipengele vyote vilivyoorodheshwa hapa chini vimejumuishwa kwenye kifurushi chako:

• A. Paneli ya Kichwa cha Mguu (1)
• B. Footboard Panel (1)
• C. Reli za pembeni (2)
• D. Boriti ya Usaidizi wa Kituo (1)
• E. Metal Slats (approx. 12-14)
• F. Support Legs (4-6, including center leg)
• G. Hardware Pack (Screws, Washers, Allen Wrench) (1)

Picha: Kina view of the bed frame's structural components, including strong support slats, sound-absorbing sponge for noise reduction, robust bed legs, and floor protection feet.

Kuweka na Kukusanya

Fuata hatua hizi kwa ajili ya mkusanyiko mzuri. Inashauriwa kuwa na watu wawili kwa ajili ya mkusanyiko.

1. Fungua Vipengee: Ondoa kwa uangalifu sehemu zote kutoka kwenye kifungashio na uziweke kwenye uso safi na laini. Tambua kila sehemu kwa kutumia orodha ya sehemu.
2. Ambatisha Reli za Upande kwenye Kichwa cha Mabango: Connect the side rails (C) to the headboard panel (A) using the provided screws and Allen wrench from the hardware pack (G). Ensure connections are secure but do not fully tighten yet.
3. Ambatisha Reli za Upande kwenye Ubao wa Mguu: Connect the other end of the side rails (C) to the footboard panel (B). Again, secure with screws but do not fully tighten.
4. Sakinisha Boriti ya Usaidizi wa Kituo: Attach the center support beam (D) to the designated brackets on the headboard and footboard. Ensure it is centered and level.
5. Weka Vipande vya Chuma: Position the metal slats (E) across the side rails, ensuring they are evenly spaced and securely fastened to the frame. The design provides sufficient support without a box spring.
6. Weka Miguu ya Usaidizi: Attach any additional support legs (F) to the center beam or other designated areas as per the included diagram.
7. Uimarishaji wa Mwisho: Once all components are in place and aligned, systematically tighten all screws and bolts until secure. Do not overtighten.

Image: Diagram illustrating the full dimensions of the bed frame (78.3"L x 53.9"W x 46"H) and its maximum weight capacity of 800 lbs.

Maagizo ya Uendeshaji

The GAOMON bed frame is designed for use with a mattress directly on its steel slat support system, eliminating the need for a box spring.

• Uwekaji wa godoro: Carefully place your full-size mattress onto the assembled slat system. Ensure the mattress is centered and fully supported by the frame.
• Usambazaji wa Uzito: Distribute weight evenly across the bed frame. The maximum weight capacity is 800 lbs, including the mattress and occupants.
• Hifadhi ya Chini ya Kitanda: The frame provides approximately 12.6 inches of clearance for under-bed storage. Utilize this space for bins or boxes as needed.

Image: The GAOMON bed frame positioned in a bedroom, showcasing its design and the available space underneath for storage baskets.

Picha: View showing the under-bed clearance of 12.6 inches, suitable for storage containers, with the overall frame height of 17.7 inches from the floor to the top of the side rail.

Matengenezo

• Kusafisha sura: Futa nyuso za chuma kwa kutumia kifaa laini, damp kitambaa. Epuka cleaners abrasive.
• Cleaning the Velvet Headboard/Footboard: For light cleaning, use a soft brush or vacuum with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
• Ukaguzi wa maunzi: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent noise.

Picha: Karibu view of the grey velvet button-tufted headboard, highlighting the fabric texture and button details, demonstrating the quality of the upholstery.

Kutatua matatizo

Vipimo

• Mfano: SBH01DF
• Ukubwa: Imejaa
• Vipimo vya Bidhaa (L x W x H): 78.3" x 53.9" x 46"
• Nyenzo: High-quality metal frame, Velvet upholstery
• Rangi: Kijivu
• Uwezo wa Uzito: Pauni 800
• Uzito wa Kipengee: Pauni 80
• Vipengele Maalum: No Box Spring Needed, Squeak Resistant design
• Mkutano Unaohitajika: Ndiyo
• Headboard Thickness: 1.4 inches (soft package)
• Kibali cha Chini ya Vitanda: inchi 12.6

Image: Close-up showing the soft package thickness of the headboard, measured at 1.4 inches, indicating comfortable padding and construction detail.

Udhamini na Msaada

GAOMON products are manufactured with quality and durability in mind. While specific warranty terms may vary, GAOMON typically offers support for manufacturing defects. For detailed warranty information or to report missing/damaged parts, please contact GAOMON customer service.

Usaidizi kwa Wateja: For assistance, please refer to the contact information provided with your purchase or visit the official GAOMON website. Please have your model number (SBH01DF) and purchase details ready when contacting support.