Mwongozo wa Mtumiaji wa Kichanganuzi cha RFID cha Chainway C72 cha Waya cha Android

Utangulizi

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Chainway C72 Wireless Android RFID Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Figure 1: Chainway C72 RFID Scanner with pistol grip, held in hand, displaying the Android 11 interface.

Bidhaa Imeishaview

The Chainway C72 is a robust and versatile handheld device designed for efficient inventory management and data capture. It integrates an Impinj E710 RFID Tag Reader and a Zebra SE4710 2D/1D/QR Barcode Reader, operating on Android 11. Its features include:

Impinj E710 RFID Tag Msomaji: Supports UHF GS1 EPC GEN2 standard, 865MHz to 928MHz, for rapid and accurate RFID tag kusoma.
Zebra SE4710 Barcode Reader: Capable of scanning 1D, 2D, and QR codes, including small, poorly printed, or plastic-covered barcodes.
Mfumo Endeshi wa Android 11: Provides a user-friendly interface and access to productivity applications via Google Play Store.
Muunganisho: Built-in Wi-Fi, Bluetooth 5.0, and GPS for seamless data synchronization and location tracking.
Uimara: IP65 rated, designed to withstand temperatures from -20°C to +50°C, features Corning Gorilla Glass, and can endure 4.9 ft drops.
Betri: 8000 mAh battery providing up to 12 hours of use with fast charge capability.
Kichakataji: Cortex A53 Octa Core 2.3GHz for optimized performance.

Chainway C72 showing broad connectivity range features

Figure 2: Key features of the Chainway C72, highlighting broad connectivity (Bluetooth 5.0, GPS, Wi-Fi 2.4G/5G), Zebra SE4710 scanner, 13 MP camera, 1200+ tags/sec RFID read rate, 4dBi support, and 25-meter RFID range.

Sanidi

1. Unboxing na Ukaguzi wa Awali

Carefully remove all components from the packaging. Verify that all items listed in the packing slip are present and inspect the device for any visible damage. If any items are missing or damaged, contact customer support immediately.

2. Ufungaji na Kuchaji Betri

Tafuta sehemu ya betri kwenye kifaa.
Insert the 8000 mAh battery, ensuring proper alignment of the contacts.
Funga sehemu ya betri kwa usalama.
Connect the provided charging cable to the device's charging port and plug the adapter into a power outlet.
Allow the device to fully charge before first use. The charging indicator will show the battery status.

Chainway C72 showing extended battery life features

Figure 3: The Chainway C72 features an 8000 mAh battery, providing up to 12 hours of use and supporting fast charging.

3. Initial Power On and Android Setup

Press and hold the power button until the device vibrates and the screen turns on.
Follow the on-screen prompts to complete the initial Android 11 setup, including language selection, Wi-Fi connection, and Google account login (optional).
Ensure the device is connected to a stable Wi-Fi network for updates and application downloads.

Maagizo ya Uendeshaji

1. Urambazaji wa Msingi

The Chainway C72 operates like a standard Android smartphone. Use touch gestures (tap, swipe, pinch) to navigate the interface. The physical buttons include:

Kitufe cha Nguvu: Huwasha/kuzima kifaa, hufunga/kufungua skrini.
Vifungo vya Sauti: Hurekebisha sauti ya sauti.
Scan Button (Orange): Activates the barcode or RFID scanner.

Upande view of Chainway C72 showing scan button

Kielelezo 4: Upande view of the Chainway C72, highlighting the orange scan button and other physical controls.

2. RFID Scanning (Impinj E710)

Open the RFID scanning application on the device.
Point the RFID antenna (located at the top of the pistol grip attachment) towards the RFID tags.
Press and hold the orange Scan button to initiate RFID tag reading. The device will emit a sound or vibration upon successful tag kugundua.
Release the Scan button to stop reading.
Iliyochanganuliwa tag data will be displayed in the application.

Chainway C72 demonstrating RFID scanning with waves

Figure 5: The Chainway C72 actively scanning RFID tags using its Impinj E710 UHF RFID scanner, depicted with radiating waves.

3. Barcode Scanning (Zebra SE4710)

Open the barcode scanning application or position the cursor in a text field where barcode data should be entered.
Aim the barcode scanner window (located near the top of the device) at the barcode.
Press the orange Scan button. A red aiming laser will appear.
Ensure the entire barcode is within the aiming pattern. The device will beep or vibrate upon successful scan.
The scanned barcode data will be automatically entered or displayed.

Matengenezo

1. Kusafisha Kifaa

Zima kifaa kabla ya kusafisha.
Tumia kitambaa laini kisicho na pamba kidogo dampiliyotiwa na maji au suluhisho laini la kusafisha ili kuifuta nje.
For the screen and scanner window, use a screen-specific cleaner and a microfiber cloth.
Do not use abrasive cleaners, solvents, or immerse the device in liquid.

2. Utunzaji wa Betri

Charge the battery regularly, avoiding complete discharge.
Hifadhi kifaa mahali pa baridi, kavu wakati haitumiki kwa muda mrefu.
If the battery performance significantly degrades, consider replacing it with an official Chainway battery.

3. Sasisho za Programu

Regularly check for and install software updates to ensure optimal performance, security, and access to new features. Updates can typically be found in the device's Settings menu under "System" or "About phone".

Kutatua matatizo

Tatizo	Sababu inayowezekana	Suluhisho
Kifaa hakiwashi.	Betri ya chini au iliyoisha.	Charge the device for at least 30 minutes. Ensure the charger is properly connected.
RFID/Barcode scanner not working.	Application error; Scanner module disabled; Damaged module.	Restart the scanning application. Restart the device. Check device settings to ensure scanner is enabled. If problem persists, contact support.
Poor RFID read performance.	Interference; Tag orientation; Distance.	Ensure no metallic objects are obstructing the antenna. Adjust the angle and distance to the tags. Reduce environmental interference.
Kifaa kina kasi ya chini au hakifanyi kazi.	Too many applications running; Low memory.	Close unnecessary applications. Clear cache. Restart the device.
Matatizo ya muunganisho wa Wi-Fi.	Nenosiri si sahihi; Nje ya eneo; Tatizo la kipanga njia.	Verify Wi-Fi password. Move closer to the access point. Restart the Wi-Fi router.

Vipimo

Mfano: C72
Mfumo wa Uendeshaji: Android 11
Kisomaji cha RFID: Impinj E710 (UHF GS1 EPC GEN2, 865MHz-928MHz)
Kichanganuzi cha Msimbo Pau: Zebra SE4710 (2D/1D/QR)
Kichakataji: Cortex A53 Octa Core 2.3GHz
Betri: 8000 mAh (up to 12 hours use, fast charge)
Muunganisho: Wi-Fi (2.4G/5G), Bluetooth 5.0, GPS
Uimara: IP65 rated, Corning Gorilla Glass, 4.9 ft drop resistance, operating temperature -20°C to +50°C
Vifaa Vinavyolingana: Kompyuta kibao, Smartphone
Mtengenezaji: Chainway
UPC: 611393757138

Chainway C72 showing fast and responsive processor details

Figure 6: The Chainway C72 is powered by a Cortex A53 Octa Core 2.3GHz processor, optimized for heavy workloads and demanding applications, and is Android 11 ready.

Chainway C72 showing ultra rugged durability features

Figure 7: The Chainway C72 boasts ultra-rugged durability with IP65 rating, operational range from -20°C to +50°C, Corning Gorilla Glass, and 4.9 ft drop resistance.

Udhamini na Msaada

For warranty information, please refer to the warranty card included with your product or visit the official Chainway website. For technical support, software updates, or service inquiries, please contact your vendor or Chainway customer service directly.

Mtengenezaji: Chainway

Mfano: C72

ASIN: B0CCPR58B3

UPC: 611393757138

	Mwongozo wa Mtumiaji wa Kompyuta Kibao ya Viwanda ya Chainway P80 - Vipengele, Vipimo, na Uendeshaji Mwongozo kamili wa mtumiaji wa kompyuta kibao ya viwandani ya Chainway P80. Jifunze kuhusu vipengele vyake ikiwa ni pamoja na UHF RFID, uchanganuzi wa msimbopau, NFC, utambuzi wa alama za vidole, usakinishaji, tahadhari za betri, utendaji kazi wa kifaa, na maelezo ya kina ya kiufundi.
	Moduli ya RFID ya Chainway CM710-8 8-Port RFID: Maelezo na Uzingatiaji Maelezo ya kina ya kiufundi, vipimo vya kiolesura, hali ya uendeshaji wa mazingira, utendakazi wa usomaji, na maelezo ya kufuata kanuni kwa ajili ya Moduli ya RFID ya Chainway CM710-8 8-Port RFID, iliyoundwa kwa ajili ya visomaji vya UHF RFID.
	Mwongozo wa Mtumiaji wa Kichanganuzi cha Chainway SR160 UHF Mwongozo wa kina wa mtumiaji wa Kichanganuzi cha Chainway SR160 UHF, kinachojumuisha vipengele vyake, utendakazi, muunganisho wa kifaa, vitendaji, usanidi wa vigezo na vipimo vingine. Mwongozo huu unafafanua jinsi ya kutumia kifaa kwa UHF RFID na programu za kuchanganua msimbopau wa 2D.
	Mwongozo wa Mtumiaji wa Kichanganuzi cha Chainway SR160 UHF Mwongozo wa mtumiaji wa Kichanganuzi cha Chainway SR160 UHF, ukifafanua vipengele vyake, utendakazi, muunganisho, usanidi wa vigezo na maelezo ya utiifu. Inajumuisha taarifa za FCC na CE/UKCA.
	Chainway R6 UHF Mwongozo wa Mtumiaji wa Sled Reader Mwongozo kamili wa mtumiaji wa Kisomaji cha Sled cha Chainway R6 UHF, unaohusu vipengele vya bidhaa, usakinishaji, uendeshaji, majaribio ya majaribio, usanidi, na vipimo vya kiufundi. Inajumuisha taarifa za kufuata sheria za FCC na EU.
	Chainway UR4 Mwongozo wa Mtumiaji wa Kisomaji cha UHF kisichobadilika Mwongozo wa mtumiaji wa Chainway UR4 Fixed UHF Reader, inayoelezea vipengele vyake, usakinishaji, usanidi wa vigezo na tag uwezo wa kusoma/kuandika. Inajumuisha maelezo ya kiufundi na maelezo ya kufuata.

Chainway C72