SCULPFUN S30 Ultra 33000mW Laser Engraving Machine User Manual

1. Utangulizi

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Ultra 33000mW Laser Engraving Machine. This high-power laser engraver is designed for precision engraving and cutting of various materials, including wood, metal, and acrylic. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.

Figure 1.1: SCULPFUN S30 Ultra 33000mW Laser Engraving Machine with example engravings.

2. Tahadhari za Usalama

WARNING: Laser radiation can cause eye and skin damage. Always follow safety guidelines.

Due to the powerful laser, never operate the engraving machine unsupervised. Pause operation if you must leave the area.
Always install the laser protective cover before operating the machine. If the cover is not installed, wear appropriate laser safety goggles.
Do not touch the laser beam with your hands or any body part, as this can cause severe burns.
Avoid strong impacts to the machine, which could damage components or misalign the laser.
Children under the age of 14 are prohibited from using this product. Children over 14 require adult supervision during operation.
Do not direct the laser beam at any specular (mirror-like) reflective objects, as this can cause injury to the operator or damage the laser.
Ensure adequate ventilation in the work area to dissipate fumes and particles generated during engraving and cutting.

Safety features of SCULPFUN S30 Ultra including emergency stop, power switch, and key lock.

Figure 2.1: Safety features including Emergency Stop Switch and Key Lock for enhanced user protection.

3. Bidhaa za Bidhaa

Powerful 33W Laser Output: Utilizes upgraded 6*6W diodes for superior cutting and engraving capabilities, capable of cutting 20mm lightweight wood, 15mm paulownia wood, or 0.05mm stainless steel in a single pass.
Eneo Kubwa la Kuchonga: Features a generous 600x600mm engraving area, accommodating large-scale projects.
32-bit Air-Assisted Motherboard: Equipped with an advanced motherboard supporting Bluetooth wireless connection and intelligent control of the air assist function via LightBurn's M8 button.
Industrial-Grade Cutting Accuracy: Achieves 0.005mm high-precision engraving with an upgraded V2.0 X-axis linear slide rail, minimizing moiré patterns.
Replaceable Protective Lens: Innovative design allows for easy replacement of the laser lens, significantly extending the laser's lifespan. A free lens is included.
Enhanced 42-bit Stepping Motor: Provides robust power for high-speed movement, with a torque of 4.2 Kg·cm, ensuring stability even with heavier loads.
Built-in High-Pressure Air-Assisted Nozzle: Generates powerful airflow to improve cutting efficiency by over 5 times and ensures clean cutting surfaces.
Solid and Durable Frame: Constructed from high-strength aluminum alloy, capable of withstanding up to 50KG, ensuring long-term precision and durability.

Illustration of the 33W laser module with its powerful quad-laser technology, showing diodes, focus, and a metal colorization chart.

Figure 3.1: Demonstrating the 33W laser power, cutting capabilities, and metal colorization feature.

Diagram showing the automatic controlled air assist (M8) feature with Air ON and Air OFF states.

Figure 3.2: Automatic Controlled Air Assist (M8) in action, improving cutting quality.

4. Kuweka

Unpack all components carefully and verify against the packing list. Assemble the machine according to the detailed instructions provided in the separate assembly guide (not included in this manual). Ensure all connections are secure and the machine is placed on a stable, level surface in a well-ventilated area.

Mkutano wa Frame: Connect the aluminum alloy frame components securely.
Usakinishaji wa Moduli ya Leza: Mount the laser module onto the X-axis carriage.
Air Assist Connection: Connect the air hose from the air pump to the laser module's nozzle.
Viunganisho vya Umeme: Connect the power adapter to the machine and a suitable power outlet (100-240V AC, 50/60Hz).
Ufungaji wa Programu: Install the recommended operating software (LightBurn or LaserGRBL) on your computer.
Initial Focus Adjustment: Use the fixed-focus column to set the correct laser focus for your material.

Components showing the modular design for easy upgrades, including laser head, power adapter, and cables.

Figure 4.1: The S30 Ultra series maintains a consistent structure for easy upgrades, requiring only laser head replacement for power upgrades.

5. Maagizo ya Uendeshaji

The SCULPFUN S30 Ultra supports various operating software, including LightBurn (with M8 air assist function) and LaserGRBL. It is compatible with both Windows and MAC systems. Supported file formats include NC, BMP, JPG, PNG, DXF, and other picture formats. Data transmission can be done via USB connection or Bluetooth wireless connection.

Uzinduzi wa Programu: Open your preferred laser control software (e.g., LightBurn).
Unganisha Mashine: Establish a connection between your computer and the engraver via USB or Bluetooth.
Load Design: Import your desired design file (e.g., NC, JPG, PNG).
Uwekaji Nyenzo: Place the material to be engraved or cut on the working area. Ensure it is flat and secured.
Mipangilio ya Kigezo: Adjust laser power, speed, and passes according to the material type and desired outcome. Refer to the software's documentation for detailed parameter settings.
Air Assist Control: If using LightBurn, utilize the M8 button to intelligently control the air assist for optimal cutting and to prevent material yellowing/blackening.
Anza Operesheni: Initiate the engraving or cutting process from the software. Monitor the machine closely during operation.
Kuacha Dharura: In case of any emergency, immediately press the red emergency stop switch on the machine.

Screenshot showing LightBurn and LaserGRBL software interfaces, highlighting compatibility with Windows and Mac.

Figure 5.1: The SCULPFUN S30 Ultra supports popular software like LightBurn and LaserGRBL for versatile operation.

6. Matengenezo

Matengenezo ya mara kwa mara huhakikisha uimara na utendaji bora wa mchongaji wako wa leza.

Laser Lens Replacement: The S30 Ultra features a replaceable lens. If the lens becomes damaged or its performance degrades after long-term use, replace it with a new one to restore cutting power. One free lens is included with your purchase, and additional lenses can be obtained from SCULPFUN.
Kusafisha Nozzle: Regularly clean the high-pressure air-assisted nozzle to prevent blockages and maintain efficient airflow. A nozzle cleaning tool is provided.
Kusafisha reli: Keep the linear slide rails clean and free of dust and debris to ensure smooth and precise movement of the laser module.
Usafishaji wa jumla: Periodically clean the entire machine, especially the working area, to remove any residue from engraving and cutting.

Close-up of the cylinder seat and included maintenance tools: laser repair tool and nozzle clean tool.

Figure 6.1: Essential maintenance tools for your SCULPFUN S30 Ultra.

7. Utatuzi wa shida

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive instruction manual or contact SCULPFUN support.

Tatizo	Sababu inayowezekana	Suluhisho
Laser haitoi mwangaza au matokeo dhaifu	Incorrect focus, dirty lens, low power setting, loose connection.	Adjust focus, clean or replace lens, increase power setting in software, check all cables.
Mashine haiunganishi kwenye kompyuta	USB cable issue, Bluetooth not paired, driver not installed, software not recognizing port.	Try a different USB port/cable, re-pair Bluetooth, reinstall drivers, restart software/computer.
Ubora wa kuchonga/kukata ni duni	Incorrect speed/power, material issues, dirty lens, misaligned laser.	Adjust speed/power settings, ensure material is suitable and clean, clean lens, check for mechanical alignment issues.
Air assist not working	Air hose kinked/blocked, pump not powered, software setting incorrect.	Check air hose for obstructions, ensure air pump is connected and powered, verify M8 setting in LightBurn.

8. Vipimo

Muundo wa Bidhaa: SCULPFUN S30 Ultra-33W
Nguvu ya Pato la Laser: 33W (light energy)
Mkazo wa Laser: 0.08x0.08 mm
Laser Wavelength: 455 ± 5nm
Mbinu ya Kuzingatia: Fixed focus column + sliding device
Usahihi wa Kuchora: 0.005 mm
Engraving Area Size: 600x600 mm
Machine Electric Power: Takriban 156W
Air Pump Type: Main board controlled, 24V, 30L/min flow rate
Air Hose Inner Diameter: 7.5 mm
Ubao wa mama: 32-bit air-assisted, supports Bluetooth wireless connection
Programu ya Uendeshaji: LightBurn (with M8 air assist), LaserGRBL, Benbox, GrblController, LiteFire
Imeungwa mkono File Miundo: NC, BMP, JPG, PNG, DXF, and other picture formats
Usambazaji wa Data: USB connection or Bluetooth wireless connection
Ingizo la Nguvu: 100-240V AC, 50/60Hz
Pato la Nguvu: 24V 7A
Vipimo vya Bidhaa: Inchi 34.06 x 9.72 x 9.25
Uzito wa Kifurushi: 9.9kg
Vyeti: CE, FCC, RoHS, FDA, ICE

Diagram illustrating the 0.005mm high-precision linear slide rail X-axis for industrial-grade engraving accuracy.

Figure 8.1: High-precision linear slide rail for superior engraving detail.

Comparison of working space, highlighting the 600x600mm large engraving area of the S30 Ultra.

Figure 8.2: Expanded working area of the S30 Ultra compared to standard models.

9. Udhamini na Msaada

For warranty information, please refer to the documentation included with your product or contact SCULPFUN customer service directly. SCULPFUN provides support for product inquiries, technical assistance, and replacement parts such as laser lenses.

For further assistance, please visit the official SCULPFUN webtovuti au wasiliana na njia zao za usaidizi kwa wateja.

10. Video Rasmi za Bidhaa

No official product videos from the seller were found that met the criteria for inclusion in this manual.

	Maelekezo na Mwongozo wa Mkutano wa Mchongaji wa Laser SCULPFUN S30 Maagizo ya kina ya kusanyiko kwa Mchongaji wa Laser wa SCULPFUN S30. Jifunze jinsi ya kuunda mchonga leza yako hatua kwa hatua, ikijumuisha kukandamiza ukanda na vidokezo vya kulenga. Inajumuisha programu na maelezo ya usaidizi.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa kina wa mtumiaji wa mashine za kuchonga za leza za SCULPFUN S6 na S9 mfululizo, kufunika usakinishaji wa programu (LaserGRBL na LightBurn), unganisho, utayarishaji, mipangilio ya kuchonga, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	Mwongozo wa Ufungaji wa Moduli ya Laser ya SCULPFUN IR-2 2W 1064nm Maagizo ya kina ya usakinishaji wa moduli ya leza ya SCULPFUN IR-2 2W 1064nm, kufunika vifungashio, kuunganisha, na kupachika kwa miundo mbalimbali ya kuchonga leza ya SCULPFUN ikijumuisha SF-A9, S10, S6, S9, S30, na S30 Ultra.
	SCULPFUN G9 Slide Extension Kit: Installation and Operation Guide Comprehensive guide for installing and operating the SCULPFUN G9 laser engraver's slide extension kit. Covers software setup, accessory installation, parameter configuration, and engraving steps for enhanced functionality.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9, inayofunika usakinishaji wa programu (LaserGRBL, LightBurn), muunganisho, utayarishaji wa kuchonga, uendeshaji, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	Mwongozo wa Mtumiaji wa Mchoraji wa Laser wa SCULPFUN V5 UV Mwongozo kamili wa mtumiaji wa Kichoraji cha Laser cha SCULPFUN V5 UV, kinachoelezea usalama, usanidi, uendeshaji, programu (SGD Laser, LightBurn), matengenezo, na utatuzi wa matatizo kwa ajili ya uchongaji sahihi.

SCULPFUN SCULPFUN S30 Ultra 33W laser engraver

SCULPFUN S30 Ultra 33000mW Laser Engraving Machine