Miongozo+

ATOMSTACK F30

ATOMSTACK F30 Air Assist Pump Instruction Manual

Model: F30 | Brand: ATOMSTACK

1. Utangulizi

The ATOMSTACK F30 Air Assist Pump is an accessory designed to significantly improve the performance of compatible laser engraving and cutting machines. By providing a focused stream of air, it helps to clear smoke and debris from the laser's path, preventing energy attenuation and ensuring a cleaner, more precise cut or engraving. This system also aids in rapidly cooling the material's surface, minimizing burning and achieving smoother edges on your projects.

ATOMSTACK F30 Air Assist Pump and accessories

Figure 1: The ATOMSTACK F30 Air Assist Pump with its included accessories, showcasing its compact design and components.

2. Taarifa za Usalama

Please read and understand all safety instructions before operating the ATOMSTACK F30 Air Assist Pump. Failure to follow these instructions may result in injury or damage to the equipment.

  • Always ensure proper ventilation in your workspace when using the air assist pump with a laser engraver.
  • Keep the air assist pump and its components away from water or other liquids.
  • Do not attempt to disassemble or modify the pump. Refer all servicing to qualified personnel.
  • Weka mbali na watoto na kipenzi.
  • Hakikisha miunganisho yote ni salama kabla ya operesheni.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa bidhaa zote zilizoorodheshwa hapa chini zimejumuishwa kwenye kifurushi chako:

  • 1x Air pump (ATOMSTACK F30 Air Assist Pump)
  • 1x 2 meters of air pipe
  • 4x Kurekebisha screw
  • 4x Fixed cable tie
  • 1x wrench ya Hexagon
  • 4x Special dedicated filter glass
  • 3x Retrofit air hood

4. Kuweka

Follow these steps to install and set up your ATOMSTACK F30 Air Assist Pump with your compatible laser engraver. The process is designed for ease of use, requiring minimal additional accessories.

  1. Prepare the Laser Module: Loosen the screws on your laser module and carefully remove the original protective cover.
  2. Remove Original Wind Hood: If present, loosen screws and remove the original wind hood from the laser module.
  3. Install New Wind Hood: Install one of the provided suitable modified wind hoods onto the laser module. Secure it with the fixing screws.
  4. Insert Filter Glass: Install a dedicated replacement filter glass into the designated slot on the new wind hood.
  5. Connect Air Pipe to Laser Module: Connect one end of the 2-meter air pipe to the air inlet on the modified wind hood.
  6. Connect Air Pipe to Pump: Connect the other end of the air pipe to the air outlet on the ATOMSTACK F30 Air Assist Pump.
  7. Muunganisho wa Nishati: Plug the power adapter into the air pump's power input, then connect it to a suitable power outlet.
Step-by-step installation guide for ATOMSTACK F30 Air Assist

Figure 2: Visual guide illustrating the quick installation process for the air assist pump, using an A10 Pro as an example.

Video 1: A detailed demonstration of the ATOMSTACK F30 Air Assist system, including its components and installation process. This video also highlights the benefits of using air assist for laser cutting and engraving.

5. Maagizo ya Uendeshaji

The ATOMSTACK F30 Air Assist Pump is designed for simple operation, providing adjustable airflow to optimize your laser engraving and cutting tasks.

5.1. Power On and Airflow Adjustment

Once connected, turn on the air assist pump using the integrated knob. This knob serves as both the power switch and the airflow adjustment control. Rotate the knob to adjust the airflow from 10 L/min to 30 L/min, depending on your material and desired cutting/engraving effect.

ATOMSTACK F30 Air Assist Pump with 2-in-1 knob for switch and adjustment, and power input

Kielelezo 3: Karibu view of the ATOMSTACK F30 Air Assist Pump's control panel, showing the 2-in-1 knob for power and airflow adjustment, and the power input port.

5.2. Faida Wakati wa Uendeshaji

The adjustable airflow helps to:

  • Remove Smoke and Dust: Effectively clears smoke and dust generated during cutting/engraving, preventing energy attenuation and ensuring consistent laser performance.
  • Reduce Surface Temperature: Powerful airflow quickly reduces the surface temperature of the material, preventing excessive burning and scorch marks.
  • Achieve Cleaner Edges: Contributes to cleaner and smoother cutting edges, enhancing the overall quality of your finished work.
Comparison of laser cutting with and without air assist, showing cleaner cuts with air assist

Figure 4: A visual comparison demonstrating the improved cutting effect when using the air assist, resulting in cleaner edges and reduced burning compared to cutting without air assist.

5.3. Low Noise Operation

Even when the airflow is adjusted to its maximum setting, the ATOMSTACK F30 Air Assist Pump operates at a noise level of less than 60dB. This is comparable to the volume of a household electric fan, ensuring a quiet working environment.

Noise level measurement of ATOMSTACK F30 Air Assist Pump showing low decibel reading

Figure 5: The ATOMSTACK F30 Air Assist Pump operating with a sound level meter displaying a low decibel reading, indicating its quiet performance.

6. Matengenezo

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK F30 Air Assist Pump.

  • Kusafisha: Periodically wipe down the exterior of the pump with a soft, dry cloth. Ensure no dust or debris accumulates around the air intake/outlet.
  • Kubadilisha Kichujio: The package includes dedicated replacement filter glass. Replace the filter glass when it appears dirty or if you notice a decrease in airflow efficiency.
  • Air Pipe Inspection: Regularly check the air pipe for any kinks, blockages, or damage. Ensure it is securely connected to both the pump and the laser module.

7. Utatuzi wa shida

If you encounter issues with your ATOMSTACK F30 Air Assist Pump, refer to the following common problems and solutions:

TatizoSababu inayowezekanaSuluhisho
Hakuna mtiririko wa hewa au mtiririko dhaifu wa hewaPower not connected; Air pipe kinked/blocked; Filter clogged; Airflow knob set too low.Check power connection; Straighten air pipe or clear blockage; Replace filter glass; Adjust airflow knob to a higher setting.
Pump ni keleleNormal operation noise; Pump not on a stable surface.Ensure pump is on a flat, stable surface to minimize vibration; Noise level is typically below 60dB.
Laser cutting/engraving quality is poor despite air assistIncorrect airflow setting; Laser module issues; Material not suitable.Adjust airflow to optimal level for material; Consult laser engraver manual for laser-specific troubleshooting; Ensure material is compatible with laser processing.

Tatizo likiendelea baada ya kujaribu suluhu hizi, tafadhali wasiliana na usaidizi kwa wateja kwa usaidizi zaidi.

8. Vipimo

KipengeleMaelezo
Nambari ya MfanoF30
Mtiririko wa hewa10-30 L/min (Adjustable)
Kiwango cha KeleleChini ya 60dB
UtangamanoATOMSTACK X7 PRO/S10 PRO/A10 PRO/A5 PRO/A5 M50 Pro/A5 M50/A5 30W/20W and other ATOMSTACK laser engraver models.
Uzito wa KipengeePauni 2.42
Vipimo vya KifurushiInchi 8.8 x 6.3 x 4.3
MtengenezajiKUSHUKA
Tarehe ya Kwanza InapatikanaFebruari 3, 2023

9. Udhamini na Msaada

The ATOMSTACK F30 Air Assist Pump comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official ATOMSTACK webtovuti.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or ATOMSTACK customer service through their official channels. Ensure you have your product model number and purchase details ready when contacting support.

Nyaraka Zinazohusiana - F30

Kablaview Mwongozo wa Mtumiaji wa Kifaa cha Kusaidia Hewa cha ATOMSTACK
Mwongozo wa mtumiaji wa Kiti cha Usaidizi wa Hewa cha ATOMSTACK, ukitoa usakinishaji, matumizi na tahadhari kwa mashine za kuchonga leza za ATOMSTACK.
Kablaview Mwongozo wa Usakinishaji wa Moduli ya Laser ya ATOMSTACK R30 V2
Sakinisha Moduli ya Leza ya ATOMSTACK R30 V2 kwa mwongozo huu kamili. Jifunze kuhusu usalama, vipengele, usakinishaji wa hatua kwa hatua kwa modeli mbalimbali za ATOMSTACK, na vidokezo vya uendeshaji.
Kablaview Mwongozo wa Mtumiaji wa ATOMSTACK P1 - Mchongaji wa Laser
Mwongozo wa kina wa mtumiaji wa mchonga leza wa ATOMSTACK P1, unaofunika tahadhari za usalama, orodha ya upakiaji, vipengele vya kifaa, uendeshaji, rasilimali za programu, Maswali Yanayoulizwa Mara kwa Mara na matengenezo.
Kablaview Mwongozo wa Mtumiaji wa Kichoraji cha Laser cha ATOMSTACK A5/A10/A20 PRO V2
Mwongozo kamili wa mtumiaji wa wachoraji wa leza wa ATOMSTACK A5, A10, na A20 PRO V2, unaohusu usalama, maagizo ya usanidi, usanidi wa programu (LightBurn, LaserGRBL), uendeshaji, matengenezo, na utatuzi wa matatizo.
Kablaview Mwongozo wa Ufungaji wa Mchoro wa Laser wa ATOMSTACK P7
Mwongozo wa kina wa usakinishaji wa Mchongaji wa Laser wa ATOMSTACK P7, unaoelezea tahadhari za usalama, hatua za kuunganisha na miongozo ya matumizi ya bidhaa. Jifunze jinsi ya kusanidi na kuendesha mashine yako ya kuchonga laser.
Kablaview Mwongozo wa Mtumiaji wa Mchongaji wa Laser wa ATOMSTACK ACE A5/A10/A20 PRO V2
Mwongozo wa kina wa mtumiaji wa Mchonga Laser wa ATOMSTACK ACE A5/A10/A20 PRO V2, unaoeleza kwa kina usalama, usakinishaji, uendeshaji, matengenezo, na utatuzi wa matatizo. Inajumuisha maudhui ya lugha nyingi na maelezo ya nyongeza.