Miongozo+

CADA C61081W

Kreni Nzito ya Simu ya CADA C61081W yenye Mota na Mwongozo wa Mtumiaji wa Udhibiti wa Mbali

Mfano: C61081W

1. Utangulizi

This manual provides detailed instructions for the assembly, operation, and maintenance of your CADA C61081W Mobile Heavy Duty Crane. Please read this manual thoroughly before beginning assembly or operation to ensure proper use and to maximize the product's lifespan. This model is a complex building block set designed for enthusiasts, featuring motorized functions and remote control capabilities.

2. Taarifa za Usalama

ONYO: HATARI YA KUCHOMA - Sehemu ndogo. Sio kwa watoto chini ya miaka 3.

  • Keep all small parts out of reach of young children.
  • Ensure all electrical components (motors, battery box, remote control) are handled carefully and kept dry.
  • Do not attempt to modify the product or its components, as this may lead to malfunction or injury.
  • Use only recommended batteries for the remote control and power functions.
  • The material is Acrylonitrile Butadiene Styrene (ABS) and is non-toxic.

3. Yaliyomo kwenye Kifurushi

Verify that all components are present before starting assembly. The CADA C61081W set includes approximately 1831 pieces, along with motors and a remote control unit.

CADA C61081W Mobile Heavy Duty Crane with box and components

Kielelezo cha 3.1: Zaidiview of the CADA C61081W set, showing the assembled crane, its packaging, remote control, and various motor components.

  • Building blocks (approx. 1831 pieces)
  • Motors for various functions
  • Kitengo cha udhibiti wa kijijini
  • Battery box (for motors)
  • USB charging cable (for battery box)
  • Mwongozo wa maagizo (hati hii)

4. Kuweka na Kukusanya

Follow the included step-by-step building instructions carefully. Assembly typically involves:

  1. Ujenzi wa Chasi: Begin by assembling the main chassis of the crane truck.
  2. Cabin and Outriggers: Construct the driver's cabin and the extendable outriggers for stability.
  3. Crane Boom Assembly: Build the multi-section crane boom, incorporating the necessary gears and mechanisms for lifting and extension.
  4. Motor and Wiring Installation: Integrate the motors into the designated positions as per the building guide. Carefully route and connect the wiring to the battery box.
  5. Powering the Battery Box: Ensure the battery box is charged using the provided USB cable.
  6. Uoanishaji wa Kidhibiti cha Mbali: Turn on the battery box and the remote control. They should automatically pair. Refer to the remote control section for detailed pairing instructions if needed.
Assembled CADA C61081W crane truck with remote control

Kielelezo cha 4.1: The fully assembled CADA C61081W crane, ready for operation with the remote control.

5. Maagizo ya Uendeshaji

The CADA C61081W crane is operated using the included remote control. Familiarize yourself with the remote control layout and functions.

5.1 Kazi za Udhibiti wa Mbali

Diagram of the CADA remote control showing power, feature, driving, and steering controls

Kielelezo cha 5.1: Remote control layout with labeled functions: Power switch, Feature switch, Driving controls, and Steering controls. It also shows the manual feature control toggle and RC feature control switch.

  • Kubadilisha Nguvu: Huwasha/kuzima kidhibiti cha mbali.
  • Feature Switch: Toggles between different crane functions (e.g., boom lift, boom extension, winch).
  • Vidhibiti vya Kuendesha: Used to move the crane truck forward and backward.
  • Steering Controls: Used to steer the crane truck left and right.
  • Manual Feature Control Toggle: A physical switch on the crane itself to enable/disable remote control of certain features.
  • RC Feature Control Switch: A switch on the remote control to activate specific motorized functions.

5.2 Crane Operations

5.2.1 Uendeshaji

The crane truck features steering knobs for precise control. Use the steering controls on the remote to maneuver the vehicle.

Close-up of the crane truck showing steering knobs

Kielelezo cha 5.2: Detail of the steering knobs on the crane truck, indicating rotational movement for steering.

5.2.2 Boom Lift Control (50° Range)

To raise or lower the crane boom, activate the appropriate feature on the remote control and use the designated controls. The boom has a lift range of approximately 50 degrees.

Diagram showing the crane boom lifting mechanism and 50 degree range

Kielelezo cha 5.3: Illustration of the boom lift control, showing the toggle B switch and spear wheel for adjusting the boom angle up to 50 degrees.

5.2.3 Boom Extension Control (34 cm)

Extend or retract the crane boom using the remote control. The boom can extend by approximately 34 cm.

Diagram showing the crane boom extension mechanism and 34 cm extension

Kielelezo cha 5.4: Illustration of the boom extension control, detailing the toggle B switch and spear wheel for extending the boom by 34 cm.

Note: Specific controls for winch operation (hook up/down) are typically integrated with the feature switch. Refer to the detailed building instructions for precise control mapping.

6. Matengenezo

  • Kusafisha: Use a soft, dry cloth to clean the model. Avoid water or harsh chemicals.
  • Hifadhi: Store the model in a cool, dry place away from direct sunlight to prevent material degradation.
  • Utunzaji wa Betri: If not in use for an extended period, remove batteries from the remote control and ensure the battery box is fully charged before storage.
  • Ukaguzi wa vipengele: Periodically inspect all connections and gears for wear or damage. Replace any broken parts promptly.

7. Utatuzi wa shida

Tatizo Sababu inayowezekana Suluhisho
Crane does not respond to remote control.
  • Remote control or battery box is off.
  • Low batteries in remote control or battery box.
  • Haijaunganishwa ipasavyo.
  • Hakikisha kuwa vifaa vyote viwili vimewashwa.
  • Replace remote control batteries or charge battery box.
  • Re-pair the remote control and battery box according to the initial setup instructions.
Motor functions are weak or slow.
  • Low battery in the battery box.
  • Obstruction in gears or moving parts.
  • Recharge the battery box.
  • Kagua na ondoa vizuizi vyovyote.
Parts are loose or falling off.
  • Mkusanyiko usio sahihi.
  • Kuvaa na kupasuka.
  • Refer to the building instructions to re-assemble the affected section.
  • Replace damaged parts if necessary.

8. Vipimo

  • Nambari ya Mfano: C61081W
  • Chapa: CADA
  • Nyenzo: Acrylonitrile Butadiene Styrene (ABS)
  • Idadi ya vipande: Takriban 1831
  • Udhibiti: Remote Control (2.4GHz)
  • Chanzo cha Nguvu: Rechargeable battery box (for motors), standard batteries (for remote control, not included)
  • Vipengele Maalum: Motorized boom lift (50°), motorized boom extension (34 cm), steering, driving. Non-toxic materials.

9. Udhamini na Msaada

For warranty information, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or replacement parts, please contact CADA customer service through their official channels. You may find additional resources and product information on the manufacturer's webtovuti.

Kwa maelezo zaidi, unaweza kutembelea: CADA Official Webtovuti

Nyaraka Zinazohusiana - C61081W

Kablaview Maagizo ya Kuunganisha Lori la Kreni Linalofanya Kazi la CaDA C61081
Maagizo ya kina ya usanidi wa Lori la Kreni Linalofanya Kazi la CaDA C61081, seti ya jengo la vipande 1831 kwa umri wa miaka 8+.
Kablaview Maagizo ya Seti ya Jengo Salama la Mitambo ya CaDA Master
Maagizo ya kina ya kuunganisha seti ya jengo la CaDA Master Mechanical Safe. Jifunze jinsi ya kuunda na kuelewa mechanics ya muundo huu tata.
Kablaview CaDA C61081 Functional Crane Truck Building Instructions
Detailed building instructions for the CaDA C61081 Functional Crane Truck model. This manual guides users through the assembly process of this construction toy.
Kablaview Maagizo ya Ujenzi wa Kivumbuzi Kinachofanya Kazi cha CaDA C61082
Mwongozo huu kamili wa maelekezo unawaongoza wajenzi katika mkusanyiko wa Kichimbaji Kazi cha CaDA C61082, kifaa cha ujenzi chenye maelezo ya kina cha vipande 1702. Gundua mchakato wa kujenga nakala halisi ya kichimbaji kwa mwongozo huu wa hatua kwa hatua kutoka CaDA.
Kablaview Vizuizi vya Ujenzi wa Magari vya CaDA Adventure C61006W RC - Maelezo Zaidiview
Gundua CaDA Adventure C61006W, seti ya kina ya magari ya kidhibiti cha mbali ya vipande 1941. Mfano huu una vifaa vya hali ya juu kama vile injini huru, usimamishaji halisi, na udhibiti wa redio wa 2.4GHz. Pata maagizo ya ujenzi katika doubleeagle.cc.
Kablaview Maagizo ya Ujenzi wa Vimbunga vya Kasi ya CaDA C55052
Mwongozo wa hatua kwa hatua wa mkusanyiko wa gari la kuchezea la ujenzi wa CaDA C55052 Velocity Hurricane. Maelekezo ya kina na orodha ya vipuri vya kutengeneza modeli.