1. Utangulizi
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Taarifa za Usalama
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- Kata umeme kwenye kivunja mzunguko au kisanduku cha fuse kabla ya kusakinisha au kukarabati.
- Hakikisha ujazo wa usambazajitage is compatible with the fixture's requirements (120V AC).
- Do not operate the fixture with damaged wiring or components.
- Epuka mfiduo wa moja kwa moja wa macho kwenye chanzo cha mwanga unapoangaziwa.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- Usibadilishe kifaa. Marekebisho yoyote yanaweza kubatilisha udhamini na kusababisha hatari za usalama.
3. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
Picha ya 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Vipimo
| Vipimo | Maelezo |
|---|---|
| Nambari ya Mfano | PTF150-NW-G1-Y-FL-8-BZ |
| Chapa | Signify (Philips) |
| Wattage | 150 Watts |
| Pato la Lumen | 18600 Lumens |
| Joto la Rangi | 4000K Nyeupe baridi |
| Ufanisi | 124 lumens kwa watt |
| Voltage | Volti 120 (AC) |
| Aina ya Kuweka | Yoke Mount (Surface Mount) |
| Maliza | Shaba |
| Nyenzo | Die-cast aluminum housing, tempered glass lens |
| Ukadiriaji wa Ulinzi wa Ingress (IP). | IP65 (fixture), IP66 (connector) |
| Uzito wa Kipengee | Pauni 4 |
| Vipimo (Takriban.) | Upana wa inchi 16.93 x Upana wa inchi 11.41 x Upana wa inchi 2.36 (Upana wa inchi 430 x Upana wa inchi 289.8 x Upana wa inchi 59.9) |
5. Kuweka na Kuweka
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Maandalizi: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- Mahali pa Kupachika: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Kuweka alama na kuchimba visima: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Salama Mpangilio: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Muunganisho wa Umeme:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Rejesha Nguvu: Mara tu usakinishaji utakapokamilika na miunganisho yote iko salama, rejesha nguvu kwenye kivunja mzunguko.
Picha ya 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Maagizo ya Uendeshaji
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Washa/Zima: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Uendeshaji Otomatiki: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Matengenezo
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Kusafisha: Periodically clean the lens and housing with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Ukaguzi: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Uingizwaji wa Sehemu: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Utatuzi wa shida
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Nuru haiwashi. | Hakuna nguvu kwa fixture. Uunganisho wa waya uliolegea. Faulty circuit breaker/fuse. | Angalia usambazaji wa nguvu. Verify all wiring connections are secure (consult a qualified electrician). Weka upya kivunja mzunguko au ubadilishe fuse. |
| Mwanga humeta au ni hafifu. | Inconsistent power supply. Wiring huru. Uharibifu wa vifaa. | Hakikisha nguvu imara. Angalia miunganisho ya waya. If damage is suspected, discontinue use and contact support. |
| Maji ndani ya kifaa. | Improperly sealed connections. Damaged housing/lens. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Ikiwa hatua za utatuzi wa matatizo hazitatui tatizo, wasiliana na huduma kwa wateja.
9. Udhamini na Msaada
For warranty information and technical support, please refer to the official Signify (Philips) webtovuti au wasiliana na idara yao ya huduma kwa wateja. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.
Mtengenezaji: Sahihisha
Nambari ya Mfano: PTF150-NW-G1-Y-FL-8-BZ
Maelezo ya Mawasiliano: Please visit the official Signify webtovuti kwa maelezo ya sasa ya mawasiliano na nyenzo za usaidizi.
