Mwongozo wa Maelekezo ya Kidhibiti Arcade cha Retro-Bit BIG6 2.4 GHz Bila Waya

Utangulizi

The Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller is designed for an enhanced gaming experience across multiple platforms, including Sega Genesis/Mega Drive consoles, PC, Mac, and other USB-enabled devices. This manual provides detailed instructions for the setup, operation, and maintenance of your controller.

Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:

• Retro-Bit BIG6 Wireless Controller
• SEGA Genesis Wireless Receiver
• Mpokeaji wa Waya wa USB
• USB-C Charge Cable (3.3ft / 1m)

Image: The Retro-Bit BIG6 Wireless Arcade Controller, including the controller itself, the Sega Genesis receiver, the USB receiver, and the product packaging.

Bidhaa Imeishaview

The BIG6 controller features a classic 6-button layout with modern enhancements for versatile gaming.

Mpangilio wa Kidhibiti

• Pedi ya Mwelekeo (D-Pad): For movement and navigation.
• Action Buttons (A, B, C, X, Y, Z): Six primary action buttons.
• Kitufe cha Kuanza: For pausing games or confirming selections.
• Kitufe cha Nyumbani: For system-level functions (e.g., on Switch or PC).
• Chagua Kitufe: For additional in-game or system functions.
• Shoulder Buttons (L, R): Located on the top edge for modern gaming controls.

Picha: Mbele view of the Retro-Bit BIG6 Wireless Arcade Controller, showing the D-Pad, six action buttons (A, B, C, X, Y, Z), Start button, and Sega Genesis logo.

Picha: Juu view of the Retro-Bit BIG6 Wireless Arcade Controller, highlighting the L and R shoulder buttons.

Kuchaji Bandari

The controller features a USB-C port for charging its internal battery.

Picha: Nyuma view of the Retro-Bit BIG6 Wireless Arcade Controller, displaying the central USB-C charging port and the L and R shoulder buttons.

Sanidi

1. Kuchaji Kidhibiti

1. Connect the supplied USB-C charge cable to the controller's USB-C port.
2. Unganisha ncha nyingine ya kebo kwenye chanzo cha nishati cha USB (kwa mfano, mlango wa USB wa kompyuta, adapta ya ukutani ya USB).
3. The LED indicator on the controller will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2-3 hours.

2. Connecting to SEGA Genesis/Mega Drive Console

1. Insert the SEGA Genesis Wireless Receiver into a controller port on your Genesis/Mega Drive console.
2. Ensure the console is powered on. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid.

3. Connecting to PC, Mac, or USB-Enabled Devices

1. Insert the USB Wireless Receiver into an available USB port on your PC, Mac, or other compatible device.
2. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid. The operating system should automatically detect the controller.

Maagizo ya Uendeshaji

Washa/Zima

• Washa: Press and hold the Home button for approximately 3 seconds.
• Zima umeme: The controller will automatically power off after a period of inactivity to conserve battery. To manually power off, press and hold the Home button for approximately 5-7 seconds until the LED indicator turns off.

Matumizi ya Msingi

Once connected, the controller functions as a standard gamepad. Button assignments may vary depending on the game or system. Refer to your game's instructions for specific control schemes.

Matengenezo

• Kusafisha: Tumia kitambaa laini na kavu kusafisha kidhibiti. Epuka kutumia kemikali kali au vifaa vya abrasive.
• Hifadhi: Hifadhi kidhibiti mahali pa baridi, pakavu mbali na jua moja kwa moja na joto kali.
• Utunzaji wa Betri: Ili kuongeza muda wa matumizi ya betri, epuka kutoa chaji kamili ya kidhibiti mara kwa mara. Chaji kidhibiti mara kwa mara, hata kama hakitumiki kwa muda mrefu.

Kutatua matatizo

Kidhibiti Hakiunganishi/Hakioanishi

• Hakikisha kuwa kidhibiti kimechajiwa.
• Verify that the correct receiver (Genesis or USB) is securely plugged into the target device.
• Make sure the controller and receiver are within close proximity (recommended within 10 feet).
• If pairing issues persist, locate the small reset pinhole on the back of the controller. Use a thin object (like a paperclip) to press the button inside the pinhole for a few seconds, then attempt to re-pair.

Buttons Unresponsive or Incorrectly Mapped

• Hakikisha kuwa kidhibiti kimechajiwa kikamilifu na kimeunganishwa ipasavyo.
• For PC/Mac, check the device's controller settings or calibration tools to ensure proper recognition and mapping.
• Some games may require specific controller configurations. Consult the game's manual.

Maisha Mafupi ya Betri

• Hakikisha kidhibiti kimechajiwa kikamilifu kabla ya matumizi.
• Utendaji wa betri unaweza kudhoofika baada ya muda kutokana na mizunguko ya kuchaji inayojirudia.
• Operating in environments with extreme temperatures can affect battery performance.

Vipimo

Udhamini na Msaada

For warranty information, technical support, or further assistance, please visit the official Retro-Bit webtovuti au wasiliana na idara yao ya huduma kwa wateja. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.

Retro-Bit Official Webtovuti: www.retro-bit.com