1. Utangulizi
This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Bidhaa za Bidhaa
- Njia Nyingi za Kudhibiti: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
- Advanced Firmware: Utilizes the latest firmware version, offering rich control interface and sensor support.
- Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
- Robust Power Handling: Features a continuous current of 140A and an instantaneous current of 400A.
- Upana VoltagAina: Operates within a voltage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
- Muundo Kompakt: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.
3. Vipimo
| Kigezo | Thamani |
|---|---|
| Mfano | FSESC6.7 (Part Number: Dual-Mini-V6.7) |
| Firmware | Latest Version (Factory recommended: 5.2) |
| Inayoendelea Sasa | 140A |
| Mkondo wa Papo Hapo | 400A |
| Voltage Mbalimbali | 14V-60V (4-13S cells, safe for 4S to 12S) |
| BEC | 5V @ 1A |
| ERPM | 150000 |
| Control Interface Ports | USB, CAN, UART, SPI, IIC |
| Sensorer zinazotumika | ABI, HALL, AS5047, AS5048A |
| Input Set Support | PPM, ADC, NRF, UART |
| Njia za Kudhibiti | DC, BLDC, FOC (sinusoidal) |
| Regenerative Capacity | Ndiyo |
| Inaweza kupangwa | Ndiyo |
| Kipimo cha waya wa magari | 12AWG |
| Kipimo cha Kebo ya Nguvu | 14AWG (with XT90 connector) |
| Vipimo (L*W*H) | 79.8mm * 66.8mm * 17.8mm |
| Nyenzo | Metal (Heat Sink) |
Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.
4. Kuweka na Wiring
Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.
Kielelezo cha 4.1: Juu view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.
Kielelezo cha 4.2: Chini view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.
Kielelezo cha 4.3: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.
4.1. Uunganisho Juuview
The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.
Kielelezo cha 4.4: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.
Kielelezo cha 4.5: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.
4.2. Sehemu za Muunganisho
- Muunganisho wa Betri: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
- Viunganisho vya Magari: Connect the two motors to the designated motor wire outputs (12AWG).
- Muunganisho wa Mpokeaji: Connect your PPM receiver to the appropriate input port for control signals.
- Mlango wa USB: Use the USB port for configuration and firmware updates (if applicable).
- Basi la CAN: For multi-ESC setups or communication with other CAN-enabled devices.
- UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.
5. Maagizo ya Uendeshaji
The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.
5.1. Njia za Kudhibiti
The controller supports four primary control modes:
- Udhibiti wa Sasa: Regulates the motor current.
- Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
- Udhibiti wa Kasi: Maintains a desired motor RPM.
- Udhibiti wa Nafasi: Controls the motor to a specific angular position.
5.2. Firmware and Configuration
The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.
6. Matengenezo
To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:
- Weka Safi na Kavu: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
- Kagua Viunganisho: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
- Usimamizi wa Joto: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
- Epuka Uharibifu wa Kimwili: Protect the ESC from impacts or excessive vibrations.
7. Utatuzi wa shida
The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.
7.1. Kazi za Ulinzi
- Kiwango cha chini Voltage Ulinzi: Huwasha ikiwa vol ya betritage drops below a safe threshold, preventing over-discharge.
- Kiwango cha juutage Ulinzi: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
- Ulinzi wa Sasa hivi: Limits current flow to prevent damage from excessive load.
- Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
- MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.
7.2. General Troubleshooting Steps
- Hakuna Nguvu: Check battery connections, battery charge level, and main power switch.
- Mota Haijibu: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
- Operesheni ya mara kwa mara: Inspect all wiring for loose connections or damage. Check for signs of overheating.
- Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.
8. Taarifa za Udhamini
The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.
9. Msaada
For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.
Maelezo ya Mawasiliano: Please refer to the official FLIPSKY webtovuti au hati zako za ununuzi kwa maelezo ya sasa ya mawasiliano.
