Utangulizi
The Carbest 6/12V Battery Charger is a sophisticated, micro-processor controlled device designed for efficient and safe charging of various vehicle batteries. It features an intuitive LCD display for optimal data presentation and supports a 5-stage charging program, including controlled trickle charging. This manual provides essential information for the safe and effective operation of your Carbest battery charger.
Maagizo ya Usalama
Please read all safety instructions carefully before using the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Usalama wa Umeme: Ensure the charger is connected to a grounded outlet. Do not expose the charger to rain or wet conditions. Disconnect power before making or breaking connections to the battery.
- Upatanifu wa Betri: This charger is designed for 6V and 12V lead-acid batteries, including AGM, Gel, and Wet types. Do not attempt to charge non-rechargeable batteries or battery types not specified.
- Uingizaji hewa: Ensure adequate ventilation during charging, especially for wet batteries, as they can produce explosive gases. Do not charge in a confined area.
- Ulinzi wa Kibinafsi: Wear eye protection and gloves when working with batteries. Avoid touching battery acid.
- Uharibifu: Do not operate the charger if it has been dropped or damaged. Contact qualified service personnel for repair.
- Watoto: Keep the charger and its accessories out of reach of children.
Bidhaa Imeishaview
The Carbest battery charger features a robust design with an integrated LCD display and intuitive controls. Below is an image of the charger with its main components.

Image: Carbest 6/12V Battery Charger. The charger unit is blue and black, featuring an LCD screen and a red 'MODE' button. It is connected to red and black battery clamps.
Vipengele Muhimu:
- Charger Unit: The main body containing the micro-processor and charging circuitry.
- Onyesho la LCD: Provides real-time information on charging status, voltage, and selected mode.
- Kitufe cha Hali: Used to select different charging programs or view habari kwenye onyesho.
- Betri Clamps: Red (+) and Black (-) clamps kwa ajili ya kuunganisha kwenye vituo vya betri.
- Kamba ya Nguvu ya AC: For connecting the charger to a mains power outlet.
Sanidi
- Tayarisha Betri: Ensure the battery terminals are clean and free of corrosion. If charging a wet battery, check the fluid levels and top up with distilled water if necessary.
- Unganisha kwa Betri:
- Unganisha nyekundu (+) cl chanyaamp kwa terminal chanya ya betri.
- Unganisha nyeusi (-) cl hasiamp kwa terminal hasi ya betri.
- For vehicles, connect the negative clamp to the vehicle chassis away from the battery and fuel line if the battery is still in the vehicle and the negative terminal is grounded to the chassis. Consult your vehicle's manual.
- Unganisha kwa Nishati: Plug the AC power cord into a standard 220-240V AC/50Hz wall outlet. The charger will power on and the LCD display will illuminate.
- Ukaguzi wa Awali: The charger will perform an initial diagnostic check of the battery. The display will show the battery voltage.
Maagizo ya Uendeshaji
The Carbest charger utilizes a micro-processor controlled 5-stage charging program for optimal battery health.
- Automatic Mode Selection: Once connected, the charger will automatically detect whether it is a 6V or 12V battery and begin the appropriate charging cycle.
- Kuelewa Onyesho la LCD: The LCD display provides real-time information such as battery voltage, sasa ya kuchaji, na kuchaji stage. Refer to the display for progress.
- 5-Stage Charging Program:
- Desulphation: If detected, this stage uses pulse charging to break down lead sulphate that may have built up in neglected batteries.
- Anza Laini: Gently introduces current to the battery to ensure it can accept a charge.
- Malipo ya Wingi: Charges the battery to approximately 80% capacity at maximum current (4.0A).
- Malipo ya kunyonya: Charges the battery to 100% capacity at a decreasinmkondo wa g.
- Float/Trickle Charge: Maintains the battery at full charge by providing a small, constant current, preventing self-discharge. This is the controlled trickle charging function.
- Diagnostic and Revival Function: The charger includes a diagnostic function to assess battery health. For deeply discharged or sulfated batteries, the revival function attempts to restore battery capacity. This process is automatic.
- Kukamilika kwa Kuchaji: The LCD display will indicate when charging is complete, typically by showing "FULL" or a similar message, and transitioning to the float/trickle charge stage.
- Inatenganisha: First, unplug the charger from the AC power outlet. Then, disconnect the black (-) negative clamp, followed by the red (+) positive clamp.
Matengenezo
- Kusafisha: Clean the charger casing with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the clamps ni safi na hazina kutu.
- Hifadhi: Hifadhi chaja mahali pakavu na penye baridi wakati haitumiki. Weka nyaya zikiwa zimezungushwa vizuri ili kuzuia uharibifu.
- Ukaguzi wa Cable: Periodically inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Do not use if damaged.
Kutatua matatizo
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Chaja haiwashi. | No power from outlet; faulty connection; internal fault. | Check power outlet with another device. Ensure power cord is securely plugged in. Verify battery clamps are correctly connected. If problem persists, contact support. |
| Battery not charging or charging slowly. | Poor connection; deeply discharged battery; incorrect battery type; battery fault. | Hakikisha clamps are clean and have good contact. Allow more time for deeply discharged batteries. Confirm battery type is compatible. Battery may be faulty and unable to hold a charge. |
| LCD display shows an error message. | Reverse polarity; short circuit; battery fault. | Disconnect charger immediately. Check battery clamp connections for correct polarity (+ to + and - to -). Inspect cables for damage. If error persists, the battery may be faulty. |
Vipimo
| Nguvu ya Kuchaji | 4.0 Amphapa |
| Onyesho | Onyesho la LCD |
| Utangamano wa Betri | 6V / 12V (AGM, Gel, Wet) |
| Programu ya Kuchaji | Microprocessor controlled, 5-stage |
| Kazi za Ziada | Diagnostic and Revival Function, Controlled Trickle Charging |
| Darasa la Ulinzi | IP65 |
| Max. Battery Capacity | 120Ah |
| Uingizaji Voltage | 220-240V AC / 50Hz, max. 70W |
| Pato Voltage | max. 14.7V DC / 4.0 A |
| Vipimo (LxWxH) | 18 x 8 x 5 cm |
| Uzito | 0.5 kg |
Udhamini na Msaada
Kwa maelezo ya udhamini au usaidizi wa kiufundi, tafadhali wasiliana na mchuuzi wako au mtengenezaji moja kwa moja. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.
Manufacturer: Carbest
Nambari ya Mfano: 174287081





