Mwongozo wa Maelekezo wa Hita ya Konvekta ya Kuta ya Stelpro Ultra-Quiet (ASHC2002W)

1. Utangulizi na Zaidiview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Taarifa za Usalama

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Soma maagizo yote kabla ya kusakinisha au kutumia hita hii.
• Hakikisha usambazaji wa umeme umekatika kwenye kivunja mzunguko mkuu kabla ya usakinishaji au matengenezo.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• Hita hii imeundwa kwa matumizi ya ndani tu.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vijenzi vyote vipo na havijaharibika wakati wa kufungua kifurushi:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Vifaa vya Ufungaji (screws, nanga)
• Mwongozo wa Maagizo

4. Vipimo

Picha ya 4.1: Vipimo vya Bidhaa

5. Ufungaji

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Kuweka Hita

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Salama mabano ya kupachika kwenye ukuta kwa kutumia skrubu zilizotolewa.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Wiring za Umeme

1. Hakikisha umeme umezimwa kwenye kivunja mzunguko mkuu.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Linda miunganisho yote na uhakikishe kuwa hakuna waya tupu zilizo wazi.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Rejesha nguvu kwenye kivunja mzunguko mkuu.

6. Maagizo ya Uendeshaji

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Kuweka Joto

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• The heater will automatically maintain the set temperature.

6.2 Njia za Uendeshaji

• Hali ya Kiotomatiki: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Hali ya Usalama: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Matengenezo

Utunzaji wa kawaida huhakikisha utendakazi bora na maisha marefu ya hita yako.

• Kusafisha: Ensure the heater is turned off and cool before cleaning. Use a soft, damp kitambaa cha kuifuta sehemu ya nje. Usitumie visafishaji au viyeyusho vya kukwaruza.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Ukaguzi wa Mwaka: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Utatuzi wa shida

Ikiwa hita yako haifanyi kazi vizuri, wasiliana na masuala yafuatayo ya kawaida kabla ya kuwasiliana na usaidizi:

• Hita haiwashi: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• Joto la kutosha: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Kelele zisizo za kawaida: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Udhamini na Msaada

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• Udhamini Mdogo wa Miaka 5 on the overall unit.
• Udhamini wa Maisha kwenye kipengele cha kupokanzwa.
• Udhamini wa Miaka 3 on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webtovuti.