MONKEY LOOP WS-10

Mwongozo wa Maelekezo ya Mfumo wa Gitaa Isiyotumia Waya ya Monkey Loop WS-10

Utangulizi

This manual provides detailed instructions for the setup, operation, and maintenance of your Monkey Loop WS-10 Wireless Guitar System. This system is designed to offer musicians a cable-free solution for their instruments, maintaining sound quality and signal integrity.

Bidhaa Imeishaview

The Monkey Loop WS-10 system consists of a transmitter and a receiver unit. Both units are compact, lightweight, and feature a rotatable design for compatibility with various instruments.

Text description: An image showing the Monkey Loop WS-10 wireless guitar system, featuring both the transmitter and receiver units side-by-side, highlighting their compact design and the 'Monkey Loop WS-10' branding.

Monkey Loop WS-10 Transmitter and Receiver units

Sifa Muhimu:

Maagizo ya Kuweka

1. Kutoza Vitengo

Before initial use, fully charge both the transmitter and receiver units. Use the included dual USB charging cable to connect both units to a USB power source (e.g., computer USB port, USB wall adapter).

Text description: An image showing the transmitter and receiver units connected to a dual USB charging cable, with a charging LED indicator visible on each unit, illustrating the charging process.

Monkey Loop WS-10 Transmitter and Receiver charging via dual USB cable

The charging indicator light will illuminate during charging and turn off or change color when fully charged (refer to the specific LED behavior in the operating section).

2. Kuunganisha Transmitter

Plug the transmitter unit into your instrument's 6.35mm output jack. The rotatable plug allows for optimal positioning on various guitar and bass body types.

Text description: An image illustrating the rotatable design of the Monkey Loop WS-10 unit, showing how the 6.35mm jack can pivot to different angles for flexible connection to an instrument, ensuring compatibility.

Monkey Loop WS-10 rotatable plug design

3. Kuunganisha Mpokeaji

Chomeka kifaa cha kupokea kwenye jeki ya kuingiza data ya kifaa chako amplifier, audio interface, or other audio device.

Text description: An image showing the Monkey Loop WS-10 receiver connected to an amplifier, with a guitar connected to the transmitter, demonstrating a typical wireless setup for an instrument.

Monkey Loop WS-10 receiver connected to an ampmaisha zaidi

Maagizo ya Uendeshaji

1. Kuwasha/Kuzima

Press and hold the power button on both the transmitter and receiver units to turn them on. Repeat the action to power them off.

2. Kuoanisha

The units are typically pre-paired from the factory. If they do not connect automatically, ensure both units are powered on and within range. If issues persist, consult the troubleshooting section.

3. Matumizi

Once both units are powered on and paired, your instrument's signal will be transmitted wirelessly to your audio device. The system offers a maximum transmission range of 50 meters (approximately 164 feet) in an open environment.

Text description: An image displaying the Monkey Loop WS-10 transmitter and receiver units side-by-side, highlighting their compact form factor and indicating their roles as transmitter and receiver.

Monkey Loop WS-10 Transmitter and Receiver units

4. Multi-Unit Operation

Up to 99 sets of Monkey Loop WS-10 systems can be used simultaneously in the same environment without interference, provided they are on different channels (if channel selection is available, refer to advanced settings, otherwise, they should auto-select).

Matengenezo

Kutatua matatizo

No Sound or Intermittent Signal:
  • Ensure both transmitter and receiver are fully charged and powered on.
  • Verify that both units are within the operational range (up to 50 meters).
  • Check for potential sources of interference (e.g., Wi-Fi routers, other wireless devices).
  • Confirm that the transmitter is securely plugged into the instrument and the receiver into the audio input.
  • Test with a standard cable to rule out issues with the instrument or ampmaisha zaidi.
Poor Sound Quality or Noise:
  • Ondoka mbali na vyanzo vinavyoweza kusababisha kuingiliwa kwa umeme.
  • Ensure the units are not too close to other electronic devices.
  • Check the instrument's output and amplifier's input for proper function.
  • The UHF system is designed for clarity; if noise persists, it might indicate environmental interference or a faulty unit.
Vitengo Visivyooanisha:
  • Power off and then power on both units.
  • Ensure they are close to each other during the pairing process.
  • If there's a reset function (not explicitly mentioned, but common), perform a factory reset.

Vipimo

KipengeleMaelezo
ChapaKITANZI CHA NYANI
Nambari ya Mfano10194525 (WS-10)
Teknolojia ya WirelessUHF
Maisha ya BetriTakriban masaa 5-6
InachajiUSB (dual USB charging cable included)
Aina ya MaambukiziHadi mita 50 (mazingira ya wazi)
Vipimo (takriban.)120 x 29 x 18 mm
UtangamanoMost electric guitars, basses, and 6.35mm audio devices

Text description: An image detailing the physical dimensions of the Monkey Loop WS-10 unit, showing measurements for length, width, and thickness in millimeters for precise understanding of its size.

Monkey Loop WS-10 dimensions diagram

Udhamini na Msaada

Information regarding specific warranty terms and support contacts is not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for detailed warranty information and customer support options.

Nyaraka Zinazohusiana - WS-10

Kablaview MONKEY LOOP Mwongozo wa Mtumiaji wa Simama ya Gitaa 15 Mkuu
Mwongozo wa kina wa mtumiaji wa stendi ya gitaa ya MONKEY LOOP Prime 15. Jifunze kuhusu vipengele vyake, matengenezo, na maagizo ya kusanidi kwa vyombo mbalimbali vya kamba. Imetengenezwa kwa aloi ya alumini ya kudumu na plastiki ya ABS.
Kablaview Mwongozo wa Mtumiaji wa Pedali ya Kirekebishaji cha Gitaa cha Monkey Loop ML-TU1
Mwongozo kamili wa mtumiaji wa kanyagio cha kirekebisha sauti cha Monkey Loop ML-TU1, kinachoshughulikia vipimo vyake, vidhibiti vya uendeshaji, na maagizo ya kina ya matumizi kwa ajili ya urekebishaji sahihi wa ala.
Kablaview Tumbili Loop ML-DT1 Gitaa Athari kwa Pedali Mwongozo wa Mtumiaji
Mwongozo wa mtumiaji wa kanyagio cha athari za gitaa la Monkey Loop ML-DT1, maelezo ya kina na utendakazi wa vipengele.
Kablaview Mwongozo wa Mtumiaji wa Monkey Loop ML-Edrum 10
Mwongozo kamili wa mtumiaji wa kifaa cha ngoma cha kielektroniki cha Monkey Loop ML-Edrum 10, unaohusu usanidi, utendaji, na maelekezo ya usanidi.
Kablaview Mwongozo wa Mmiliki wa Mfumo wa Gitaa Usio na waya wa LEKATO WS-80
Gundua mwongozo wa wamiliki wa Mfumo wa Gitaa Usio na waya wa LEKATO WS-80. Jifunze jinsi ya kusanidi, kutumia, na kutatua kisambazaji na kipokeaji hiki kisichotumia waya cha 2.4GHz ISM kwa gitaa za umeme, inayoangazia zaidi ya saa 8 za maisha ya betri na plagi ya kuzungushwa ya digrii 220. Boresha usanidi wako wa gita kwa suluhisho hili la kuaminika na linalobebeka la pasiwaya.
Kablaview Mwongozo wa Mtumiaji wa Mfumo wa Sauti Usio na Waya wa Califone WS
Mwongozo wa mtumiaji wa Mfumo wa Sauti Usio na Waya wa Califone WS, ukitoa maelezo ya kina juu ya maagizo ya usalama, yaliyomo kwenye kifurushi, kitambulisho cha sehemu, usanidi, usakinishaji, utendakazi wa kimsingi, utatuzi, vipimo vya kiufundi na udhamini.