SCULPFUN S9 Laser Engraver Machine User Manual

Taarifa Muhimu za Usalama

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Always read and understand all instructions before use.

Ulinzi wa Macho: Always wear the provided laser safety glasses when the machine is in operation. The laser filter cover on the S9 filters 98% of ultraviolet light, but direct exposure can still cause severe eye damage.
Hatari ya Moto: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Ensure a fire extinguisher is readily available.
Uingizaji hewa: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting.
Usalama wa Nyenzo: Only engrave or cut materials specified as safe. Some materials can produce toxic fumes or catch fire easily.
Ulinzi wa uso wa kazi: Use the A4 steel pad provided to protect your work surface from laser damage and to isolate potential fire risks.
Kuacha Dharura: Familiarize yourself with the location of the emergency power switch on the S9 machine for immediate shutdown.

SCULPFUN S9 laser module with eye protection cover

The laser module features a protective cover to help filter harmful light, enhancing eye safety during operation.

SCULPFUN S9 machine with a safety metal pad underneath

A safety metal pad is included to protect your table from laser penetration and reduce fire risks.

Bidhaa Imeishaview

The SCULPFUN S9 is a high-performance laser engraver and cutter designed for precision work on a variety of materials. It features advanced laser beam shaping technology, an all-metal structure for stability, and a user-friendly fixed-focus design.

SCULPFUN S9 Laser Engraver Machine with various engraved and cut sampchini

The SCULPFUN S9 machine, showcasing its robust design and examples of its engraving and cutting capabilities on different materials.

Sifa Muhimu

Laser Beam Shaping Technology: Utilizes a 5.5W diode laser with an ultra-fine 0.06mm laser focus, providing a 90W CO2 laser effect for strong cutting penetration and fine engraving.
Usahihi wa Juu: Achieves an engraving precision of 0.01mm, allowing for incredibly detailed work.
Fixed-Focus Design: Features a combination of a fixed-focus lens and a sliding design for quick and easy focusing by simply moving the laser and tightening screws.
Robust All-Metal Structure: Ensures extreme sturdiness and enhances engraving accuracy, designed for quick assembly within 10-20 minutes.
Eneo Kubwa la Kuchonga: Offers a generous 410mm x 420mm working area to accommodate various project sizes.
Utangamano mpana: Supports popular engraving software such as LaserGRBL, LightBurn, Benbox, Grbl Controller, and LiteFire, compatible with Windows and MAC systems, and various file formats (JPG, PNG, DXNF, SVG, G-Code, BC, BMP).

Close-up of the SCULPFUN S9 laser module highlighting laser beam shaping technology

Kina view of the laser module, emphasizing its advanced laser beam shaping technology for superior performance.

Comparison of S9 laser beam with an ordinary square laser beam

Visual comparison illustrating the thinner, more effective energy range of the S9 laser compared to an ordinary square laser.

Iliyokuzwa view showing ultra-thin engraving line precision of 0.08mm

A magnified image demonstrating the ultra-thin, high-precision engraving line capability of the S9, as fine as 0.08mm.

Mkutano na Usanidi

The SCULPFUN S9 is designed for quick and straightforward assembly. Follow these general steps to set up your machine:

Fungua Vipengee: Ondoa kwa uangalifu sehemu zote kutoka kwenye kifungashio na uthibitishe dhidi ya orodha ya vifungashio.
Kukusanya Fremu: Unganisha mtaalamu wa aluminifiles to form the main frame of the engraver. The design allows for rapid assembly, typically within 10-20 minutes.
Sakinisha Moduli ya Leza: Mount the laser module onto the gantry. Ensure it is securely fastened.
Unganisha Kebo: Attach all necessary power and data cables according to the provided diagrams.
Washa: Connect the power adapter and turn on the machine using the main power switch.

Diagram showing quick assembly steps for the SCULPFUN S9 laser engraver

Visual guide illustrating the simple, step-by-step assembly process for the SCULPFUN S9.

Kuzingatia Laser

The S9 features a fixed-focus laser combined with a sliding design for easy focusing. To set the focus:

Place the material to be engraved or cut on the work surface.
Move the laser module down until the fixed-focus spacer (usually a small metal cylinder) touches the material surface.
Tighten the screws on the laser module to secure it in this position.
Remove the fixed-focus spacer. The laser is now correctly focused for your material.

Operating the SCULPFUN S9

Utangamano wa Programu

The SCULPFUN S9 is compatible with a wide range of sophisticated engraving software, offering flexibility for your projects:

LaserGRBL
LightBurn (supports MAC system)
Benbox
Grbl Controller
LiteFire

It supports PWM engraving mode and various file formats including JPG, PNG, DXF, SVG, G-Code, BC, and BMP.

Screenshots showing software compatibility for SCULPFUN S9, including LaserGRBL and LightBurn

The SCULPFUN S9 offers broad compatibility with popular laser engraving software, enhancing user flexibility.

Nyenzo Zinazosaidiwa

The S9 can engrave and cut a diverse range of materials:

Nyenzo za Kuchonga: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, black stone.
Nyenzo za kukata: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, certain plastic boards.

Examples of various materials engraved and cut by the SCULPFUN S9, including wood, leather, acrylic, steel, and fabric

A visual display of the SCULPFUN S9's versatility, showing successful engraving and cutting on a wide array of materials.

Demonstration of SCULPFUN S9 cutting 15mm wood, 10mm plywood, and 10mm acrylic

Images demonstrating the S9's impressive cutting capabilities on thick materials like 15mm wood, 10mm plywood, and 10mm acrylic.

Hatua za Msingi za Uendeshaji

Tayarisha Muundo Wako: Create or import your design using your chosen engraving software. Adjust settings such as power, speed, and passes according to your material and desired outcome.
Nyenzo ya Mahali: Securely place your material on the work surface, ensuring it is flat and within the engraving area. Use the A4 steel pad underneath.
Set Focus: Follow the fixed-focus procedure described in the Setup section to ensure optimal laser focus.
Unganisha Mashine: Connect the engraver to your computer via USB.
Anza Operesheni: Initiate the engraving or cutting process from your software.
Fuatilia Maendeleo: Stay near the machine and monitor the process for any issues, especially fire hazards.
Zima umeme: Once the process is complete, turn off the machine and disconnect it from the power source.

Matengenezo na Utunzaji

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.

Safi Lenzi ya Laser: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
Inspect Belts and Rails: Check the tension of the timing belts and ensure the guide rails are clean and free of debris. Lubricate rails if necessary, using appropriate lubricant.
Usafishaji wa jumla: Keep the machine free of dust and material residue. Use compressed air to clean hard-to-reach areas.
Sasisho za Firmware: Angalia mtengenezaji website for any available firmware updates to ensure your machine runs with the latest improvements.

Kutatua Masuala ya Kawaida

Sehemu hii inatoa suluhisho kwa matatizo ya kawaida unayoweza kukutana nayo.

Tatizo	Sababu na Suluhisho linalowezekana
Mashine haiwashi	Check if the power adapter is securely connected to both the machine and the power outlet. Ensure the main power switch on the machine is in the 'ON' position. Thibitisha kuwa umeme unafanya kazi.
Laser haitoi mwangaza au matokeo dhaifu	Check laser focus; re-focus if necessary. Safisha lensi ya laser. Verify laser power settings in your software. Ensure the laser module cable is securely connected.
Ubora duni wa kuchonga/kukata	Incorrect focus: Re-focus the laser. Incorrect speed/power settings: Adjust settings in software based on material. Material issues: Ensure material is flat and suitable for laser processing. Dirty lens: Clean the laser lens.
Machine not responding to software	Check USB cable connection between machine and computer. Ensure correct COM port is selected in your software. Restart the software and the machine. Install/update necessary drivers for the machine.
Kelele isiyo ya kawaida wakati wa operesheni	Angalia kama kuna skrubu au vipengele vilivyolegea. Inspect belts for wear or misalignment. Clean and lubricate guide rails.

Vipimo vya Kiufundi

Kipengele	Maelezo
Mfano	S9
Nguvu ya Laser	5.5W Diode Laser (90W CO2 laser effect)
Laser Wavelength	455 ± 5 sq m
Eneo la Kuchonga	mm 410 x 420 mm
Usahihi wa Kuchonga	0.01 mm
Max Kukata Unene	15mm wood, 10mm acrylic
Vipimo vya Bidhaa (L x W x H)	41 x 42 x 0.1 cm
Uzito wa Bidhaa	4.62 kg
Hali ya Uendeshaji	Mwongozo
Mtengenezaji	Inncen

Udhamini na Usaidizi wa Wateja

The SCULPFUN S9 Laser Engraver Machine comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's webtovuti kwa sheria na masharti maalum ya udhamini.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (S9) handy when contacting support.

	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa kina wa mtumiaji wa mashine za kuchonga za leza za SCULPFUN S6 na S9 mfululizo, kufunika usakinishaji wa programu (LaserGRBL na LightBurn), unganisho, utayarishaji, mipangilio ya kuchonga, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9 Mwongozo wa mtumiaji wa Mashine ya Kuchonga ya Laser ya SCULPFUN S6/S9, inayofunika usakinishaji wa programu (LaserGRBL, LightBurn), muunganisho, utayarishaji wa kuchonga, uendeshaji, mapendekezo ya nyenzo, utatuzi wa matatizo na matengenezo.
	Maelekezo na Mwongozo wa Mkutano wa Mchongaji wa Laser SCULPFUN S30 Maagizo ya kina ya kusanyiko kwa Mchongaji wa Laser wa SCULPFUN S30. Jifunze jinsi ya kuunda mchonga leza yako hatua kwa hatua, ikijumuisha kukandamiza ukanda na vidokezo vya kulenga. Inajumuisha programu na maelezo ya usaidizi.
	Mwongozo wa Mtumiaji wa Mashine ya Kuchonga Laser ya SCULPFUN S6/S6 Pro Mwongozo wa mtumiaji wa mashine ya kuchonga leza ya SCULPFUN S6/S6 Pro, kuweka maelezo kwa kina, uendeshaji, miongozo ya usalama, usanidi wa programu (LaserGRBL, LightBurn), mapendekezo ya vigezo vya nyenzo, utatuzi wa masuala ya kawaida na vidokezo vya urekebishaji.
	Maagizo ya Mkutano wa SCULPFUN S9 Laser Mchoraver Mwongozo wa kina wa kuunganisha mchonga leza wa SCULPFUN S9, maelezo ya sehemu, hatua, na kanuni za kuzingatia. Inajumuisha mapendekezo ya programu na maelezo ya usaidizi.
	SCULPFUN H4 Honeycomb Panel Assembly Guide Detailed assembly instructions and parts list for the SCULPFUN H4 Honeycomb Panel, designed for laser cutting and engraving.

SCULPFUN S9