Marmitek Stream T2 Pro Additional HDMI Transmitter User Manual

Bidhaa Imeishaview

The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.

Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.

Maagizo ya Kuweka

Follow these steps to set up your Marmitek Stream T2 Pro transmitter:

Muunganisho wa Nishati: Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
Muunganisho wa HDMI: Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
Kuoanisha na Mpokeaji: Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
Uteuzi wa Chanzo: Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
Uteuzi wa Onyesho: On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.

Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.

Kuendesha Kifaa

Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:

Muunganisho wa Kiotomatiki: The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
Wireless Display Modes:
- Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
- AirPlay: For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
- DLNA: Compatible with various devices and media servers for streaming multimedia content.
Kiashiria cha LED: The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.

Matengenezo

To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:

Kusafisha: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
Hifadhi: Wakati haitumiki kwa muda mrefu, hifadhi kifaa mahali pa baridi, kavu mbali na jua moja kwa moja na joto kali.
Uingizaji hewa: Ensure the ventilation holes on the device are not blocked to prevent overheating.
Kushughulikia: Shikilia kifaa kwa uangalifu. Epuka kuiangusha au kuiweka kwenye athari kali.

Kutatua matatizo

If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:

Tatizo	Sababu inayowezekana	Suluhisho
Hakuna ishara inayoonyeshwa.	Incorrect HDMI input selected on source or display. Kisambazaji hakijawashwa. Haijaunganishwa na kipokeaji. Out of range or obstructions.	Verify HDMI input selection on both source and display. Ensure the transmitter is properly powered via USB. Perform pairing procedure as per S2 Pro manual. Reduce distance between transmitter and receiver, remove obstructions.
Intermittent signal or poor quality.	Kuingilia kati kutoka kwa vifaa vingine visivyo na waya. Weak signal due to distance or obstructions. Source device resolution incompatibility.	Move the device away from other wireless devices (e.g., Wi-Fi routers, cordless phones). Ensure clear line of sight and reduce distance. Check if source device resolution is supported (up to 1080p/60Hz).
Cannot connect via AirPlay/Miracast.	Device not on the same network (for AirPlay/DLNA). Feature not enabled on source device.	Ensure both the source device and the Stream S2 Pro receiver are connected to the same Wi-Fi network. Enable screen mirroring/wireless display feature on your source device.

Vipimo vya Kiufundi

Kipengele	Maelezo
Chapa	Marmitek
Nambari ya Mfano	8392
Aina ya Bidhaa	Additional HDMI Transmitter
Azimio la Max	HD1080p/60 Hz
Rangi zisizo na waya	Hadi mita 20
Teknolojia ya Uunganisho	USB, HDMI
Aina ya kiunganishi	HDMI
Mawasiliano ya Wireless	Miracast, AirPlay, DLNA
Vipengele Maalum	Inabebeka
Vifaa Sambamba	Laptops, various source devices with HDMI output
Uzito wa Kipengee	Gramu 200
Nguvu ya Pato	5 Watts
Huduma za Mtandao Zinazotumika	Browser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.)

Udhamini na Msaada

Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek webtovuti au hati yako ya ununuzi kwa sheria na masharti ya udhamini wa kina.

For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's webtovuti au katika ufungaji wa bidhaa asili.

	Mwongozo wa Kuweka Kisambazaji cha HDMI cha Waya cha Marmitek Stream S2 Pro na Kipokeaji Jifunze jinsi ya kusakinisha na kusanidi kisambazaji na kipokeaji cha Marmitek Stream S2 Pro Wireless HDMI kwa ajili ya uakisi wa skrini bila mshono kupitia AirPlay na Miracast. Inajumuisha vipimo vya kiufundi na maagizo ya usalama.
	Marmitek Tiririsha S1 Pro Wireless HDMI Cable - Mwongozo wa Mtumiaji Mwongozo wa kina wa kebo ya HDMI isiyo na waya ya Marmitek Stream S1 Pro, inayofunika seti ya maudhui, miunganisho, maagizo ya usalama, usakinishaji, viashirio vya hali ya LED, uwasilishaji wa kuanzia na vipimo vya kiufundi. Huwasha utumaji pasiwaya kutoka kwa Kompyuta/kompyuta hadi kwenye skrini.
	Marmitek Split 712 HDMI 2.1 Splitter: 8K60hz, 4K120hz, HDR, VRR, ALLM Mwongozo wa mtumiaji na vipimo vya kiufundi vya kigawanyiko cha Marmitek Split 712 HDMI 2.1. Jifunze kuhusu vipengele vyake ikiwa ni pamoja na usaidizi wa 8K60hz/4K120hz, HDR, VRR, ALLM, modi za EDID (Otomatiki, Nakili, Scaler), usakinishaji na muunganisho.
	Marmitek MegaView Mwongozo wa Mtumiaji wa 90 HDMI Extender Mwongozo wa mtumiaji wa Mega ya MarmitekView 90, kiendelezi cha HDMI kinachotuma mawimbi kupitia kebo moja ya Ethaneti ya CAT5e/6 hadi mita 120. Inajumuisha usanidi, vipimo, na utatuzi.
	Marmitek TV Anywhere Wireless HD: Mwongozo wa Mtumiaji wa Kiendelezi cha HDMI Isiyotumia Waya Mwongozo kamili wa mtumiaji wa Marmitek TV Anywhere Wireless HD, unaoelezea kiendelezi cha HDMI isiyotumia waya, usanidi, vipengele kama vile kurejesha IR na utiririshaji wa simu mahiri, na utatuzi wa matatizo. Inasaidia Full HD 1080p.
	Marmitek Unganisha Mwongozo wa Mtumiaji wa AE34 Mwongozo wa kina wa mtumiaji wa Marmitek Connect AE34, unaoeleza kwa kina maelezo yake, usakinishaji, matumizi na utatuzi wa matatizo. Jifunze jinsi ya kuunganisha vifaa vya sauti na kutoa sauti kutoka kwa vyanzo vya AV.

Marmitek 8392