1. Utangulizi
The Milestone MPT-II is a compact and portable 58mm thermal printer designed for various business applications, including retail, restaurants, and mobile logistics. It offers high-speed, clear printing and features Bluetooth connectivity for seamless integration with Android and iOS devices. Its lightweight design and long-lasting battery make it ideal for on-the-go printing needs.
2. Sifa Muhimu
- Uchapishaji wa Bluetooth: Supports Android and iOS devices for wireless printing.
- Uwezo wa kubebeka: Light and compact design allows for printing anywhere, anytime.
- Low Operating Cost: Direct thermal printing eliminates the need for ink ribbons or cartridges, requiring only thermal paper.
- Maisha marefu ya Betri: Built-in 7.4V/2500mAh rechargeable lithium battery provides up to 4 hours of continuous printing.
- Kiolesura chenye Ufanisi: Equipped with both USB and Bluetooth connectivity.
- ESC/POS Compatible: Supports standard ESC/POS print commands for broad software compatibility.
3. Usanidi wa Awali
3.1 Unboxing na Yaliyomo
Carefully unpack the printer and verify all components are present:
- 1 x Milestone MPT-II Thermal Printer
- 1 x Kebo ya USB
- 1 x USB Adaptor
- 1 x Roll ya Karatasi
- 1 x Mwongozo wa Mtumiaji (hati hii)
3.2 Kuchaji Printer
- Connect the USB cable to the printer's charging port.
- Chomeka adapta ya USB kwenye soketi ya kawaida ya umeme.
- The charging indicator light will illuminate. Charge the printer fully before first use (approximately 2.5-3 hours for continuous printing).
3.3 Kupakia Karatasi ya Joto
- Open the paper compartment cover by gently pushing the latch.
- Insert the thermal paper roll with the printing side facing outwards (as shown in Figure 2). Ensure the roll is seated correctly.
- Vuta karatasi ndogo nje ya ukingo wa mwisho.
- Funga kifuniko cha sehemu ya karatasi kwa nguvu hadi kibonyeze mahali pake.
4. Maagizo ya Uendeshaji
4.1 Kuwasha / Kuzima
- Kuwasha: Bonyeza na ushikilie kitufe cha kuwasha/kuzima hadi mwanga wa kiashirio uangaze.
- Ili kuzima: Bonyeza na ushikilie kitufe cha kuwasha/kuzima hadi kiashiria kizima.
4.2 Muunganisho wa Bluetooth
The MPT-II printer supports Bluetooth connectivity for mobile devices.
- Hakikisha printa imewashwa na iko ndani ya eneo lako la kifaa cha mkononi.
- On your mobile device (Android/iOS), go to Bluetooth settings and turn Bluetooth on.
- Tafuta available devices. The printer will appear as "MPT-II".
- Select "MPT-II" to pair. If prompted for a password, enter 1234 or 0000.
- Once paired, the printer is ready for use with compatible applications.
4.3 Using with Applications
For mobile printing, you will need a compatible application. Milestone recommends downloading RAWBT Printer App or MYXPrint App from the Google Play Store. For iOS, search for compatible thermal printer apps in the App Store.
- Open your chosen printing application.
- Navigate to the printer settings within the app.
- Select the "MPT-II" printer from the list of available Bluetooth devices.
- You can now send print commands from the application.
Muunganisho wa USB 4.4 (kwa Kompyuta)
The printer can also be connected to a PC via USB. You may need to install a printer driver, which is typically available from the manufacturer's website or included on a CD with the product (if applicable).
5. Matengenezo
5.1 Kusafisha Printer
To ensure optimal performance and print quality, regularly clean the printer:
- Kichwa cha Kuchapisha: Tumia pamba nyepesi dampImechanganywa na pombe ya isopropili ili kufuta kwa upole kichwa cha kuchapisha chenye joto. Acha kikauke kabisa kabla ya matumizi.
- Njia ya Karatasi: Use a soft, dry cloth or a small brush to remove any paper dust or debris from the paper path.
- Nje: Futa sehemu ya nje ya kichapishi kwa laini, damp kitambaa. Epuka kutumia kemikali kali au visafishaji vya abrasive.
5.2 Utunzaji wa Betri
- Chaji betri kikamilifu kabla ya matumizi ya kwanza.
- Epuka kumaliza kabisa betri mara kwa mara.
- If storing the printer for an extended period, charge it to about 50% and recharge every few months to prevent battery degradation.
6. Utatuzi wa shida
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Printa haiwashi. | Betri iko chini au imeisha. | Charge the printer using the provided USB cable and adaptor. |
| Haiwezi kuunganisha kupitia Bluetooth. | Bluetooth is off on device; incorrect pairing password; printer not discoverable. | Ensure Bluetooth is enabled on your device. Re-attempt pairing with password 1234 or 0000. Restart both printer and device. |
| No print output or blank paper. | Paper loaded incorrectly; out of paper; print head dirty. | Check paper orientation (printing side out). Replace paper roll if empty. Clean the thermal print head (refer to Maintenance section). |
| Ubora duni wa uchapishaji (umefifia, mistari). | Print head dirty; low battery; poor quality thermal paper. | Clean the print head. Charge the printer fully. Use high-quality thermal paper. |
| Printer beeps continuously. | Paper alarm (out of paper or paper jam); low battery reminder. | Check and replace paper roll or clear jam. Charge the printer. |
7. Maelezo ya kiufundi
| Kipengele | Vipimo |
|---|---|
| Mbinu ya Uchapishaji | Uchapishaji wa mstari wa joto |
| Upana wa Uchapishaji | Paper width 58mm, effective width 58mm |
| Uzito wa Kuchapisha | 576 nukta/laini |
| Azimio | 8 dots/mm, 203 DPI |
| Kasi ya Uchapishaji | 70mm/s (Max Print speed Monochrome: 50 ppm) |
| Printer Core Life | 50KM (25% print density or less than 100 million pulses) |
| Printable Content | English, numbers, symbols, characters, pictures, 1D/2D barcode, multi-languages |
| Kiolesura cha Mawasiliano ya Data | USB / Bluetooth |
| Ugavi wa Nguvu | Machine charging 9V-1.5A |
| Betri | Built-in rechargeable 2600mAh lithium-ion battery (7.4V/2500mAh) |
| Continuous Printing Time | Saa 2.5-3 |
| Seti ya Maagizo | ESC / POS inalingana |
| Kukata Karatasi | Manually tear |
| Utangamano wa Mfumo wa Uendeshaji | Android, iOS, Windows |
| Vipimo vya Bidhaa | 15D x 12W x Sentimita 6H |
| Uzito wa Kipengee | Gramu 310 |
| Vipengee vilivyojumuishwa | 1 x Thermal Printer, 1 x USB Cable, 1 x USB Adaptor, 1 x Paper Roll, 1 x User Manual |
8. Udhamini na Msaada
This product comes with a 10-day warranty as per the purchase terms. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer support. Refer to your purchase documentation for specific contact details.
Mtengenezaji: Milestone
Mwagizaji: SB RETAILS, SECTOR 28, PRADHIKARAN, PUNE-44, +918888881631
