ToolkitRC M4AC 30W 2.5A Compact AC Balance Charger User Manual

1. Utangulizi

Thank you for choosing the ToolkitRC M4AC 30W 2.5A Compact AC Balance Charger. This manual provides essential information for the safe and efficient operation of your charger. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The M4AC is a compact and powerful balance charger designed for lithium batteries, featuring an intuitive IPS display and precise balancing capabilities.

2. Taarifa za Usalama

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the charger or batteries.

• Daima endesha chaja katika eneo lenye hewa ya kutosha, mbali na vifaa vinavyoweza kuwaka.
• Do not expose the charger to moisture, rain, or extreme temperatures.
• Ensure the correct battery type and cell count are selected before charging. Incorrect settings can lead to battery damage or fire.
• Usiwahi kuacha chaja bila kutunzwa wakati inafanya kazi.
• Keep out of reach of children. Recommended age for use is 14 years and up.
• Do not attempt to disassemble or modify the charger. This will void the warranty and may cause malfunction.
• Tenganisha chaja kutoka kwa chanzo cha nishati wakati haitumiki.

3. Bidhaa Imeishaview

The ToolkitRC M4AC charger is designed for ease of use with a clear display and essential ports.

Kielelezo cha 3.1: Mbele view of the M4AC charger. The screen shows charging status, including voltage, current, and battery capacity. Below the screen is a button labeled 'TYPE / CURR' for navigation and selection.

Kielelezo cha 3.2: Output side of the M4AC charger. This view highlights the yellow XT60 output connector on the right and the multi-pin balance port on the left, labeled for 2-4S batteries.

Kielelezo cha 3.3: Nyuma view of the M4AC charger. This shows the standard two-prong AC power input port, where the power cable connects to supply electricity to the charger.

3.1. Vipengele

• Onyesho la IPS: High-resolution screen for displaying charging parameters.
• TYPE / CURR Button: Used for navigating menus and adjusting current settings.
• XT60 Output Port: Main power output connector for charging batteries.
• Balance Port (2-4S): For connecting battery balance leads to ensure even cell voltage wakati wa malipo.
• Mlango wa Kuingiza Data wa AC: For connecting the charger to a standard AC power outlet.

4. Kuweka

Follow these steps to set up your ToolkitRC M4AC charger for the first time.

1. Fungua Chaja: Carefully remove the charger and any included accessories from its packaging.
2. Unganisha Nguvu: Plug the AC power cable into the AC input port on the rear of the charger (Figure 3.3). Then, plug the other end of the power cable into a suitable AC power outlet (100-240V AC). The charger display should illuminate.
3. Skrini ya Awali: The display will show the main interface, ready for battery connection.

5. Maagizo ya Uendeshaji

This section details how to charge and balance your lithium batteries using the M4AC charger.

5.1. Connecting a Battery

1. Identify Battery Type: Ensure your battery is a lithium type (LiPo, LiFe, LiHV) and within the 2-4S cell count range supported by the charger.
2. Connect Balance Lead: First, connect the battery's balance lead to the charger's balance port (Figure 3.2). Ensure the connector is inserted correctly, aligning the pins.
3. Connect Main Power Lead: Next, connect the battery's main power lead (XT60 connector) to the charger's XT60 output port (Figure 3.2).
4. Utambuzi wa Kiotomatiki: The charger will automatically detect the battery's cell count and type. The display will show the detected voltage and cell count.

5.2. Kurekebisha Mkondo wa Kuchaji

1. Once the battery is connected and detected, the screen will show the default charging current.
2. Press the 'TYPE / CURR' button to cycle through available charging current options. Select a current appropriate for your battery's capacity (typically 1C, e.g., for a 2200mAh battery, charge at 2.2A).
3. Press and hold the 'TYPE / CURR' button to confirm the selection and start charging.

5.3. Kufuatilia Maendeleo ya Kuchaji

During charging, the IPS display provides real-time information:

• Jumla ya Voltage: Jukumu la jumlatage ya kifurushi cha betri.
• Kiini Voltages: Seli ya mtu binafsi ujazotages for balancing.
• Inachaji ya Sasa: The current being delivered to the battery.
• Capacity Charged: The amount of mAh (milliampere-hours) delivered to the battery.
• Asilimia ya Kuchajitage: An estimated percentage of charge completion.

5.4. Completing the Charge

The charger will automatically stop charging when the battery reaches its full voltage. An audible alert may sound, and the display will indicate 'Charge Complete'.

1. Once charging is complete, first disconnect the main power lead (XT60) from the charger.
2. Then, disconnect the balance lead from the charger.
3. Remove the charged battery.

6. Matengenezo

Matengenezo sahihi yanahakikisha uimara na uendeshaji wa chaja yako.

• Kusafisha: Tumia kitambaa laini na kikavu kusafisha sehemu ya nje ya chaja. Usitumie viyeyusho au visafishaji vya kukwaruza.
• Hifadhi: Hifadhi chaja mahali penye ubaridi, pakavu mbali na jua moja kwa moja na joto kali.
• Ukaguzi: Periodically inspect the power cable and connectors for any signs of damage or wear. Do not use if damaged.

7. Utatuzi wa shida

If you encounter issues with your M4AC charger, refer to the following common problems and solutions.

8. Vipimo

Key technical specifications for the ToolkitRC M4AC charger.

9. Udhamini na Msaada

For warranty information, technical support, or service inquiries, please contact ToolkitRC directly or refer to their official webtovuti. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai ya udhamini.

Mtengenezaji: ToolkitRC

Webtovuti: www.toolkitrc.com (Tafadhali thibitisha rasmi website for the most accurate support information.)