1. Utangulizi
Thank you for choosing the HMS LOOP08 Electric Treadmill. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new treadmill. Please read this manual thoroughly before using the product and keep it for future reference.
The HMS LOOP08 is designed for home use, offering a compact and intuitive fitness solution. Its modern design integrates a digital display directly into the running surface, eliminating bulky frames and armrests for a sleek profile.
2. Taarifa za Usalama
Before operating the treadmill, please observe the following safety precautions:
- Daima wasiliana na daktari kabla ya kuanza programu yoyote mpya ya mazoezi.
- Place the treadmill on a flat, stable surface with adequate clearance around it (at least 2 meters behind and 0.6 meters on each side).
- Ensure the power cord is not pinched or damaged and is connected to a grounded outlet.
- Usiruhusu watoto au wanyama vipenzi karibu na kinu cha kukanyaga kikiwa kinafanya kazi.
- Vaa viatu na nguo za riadha zinazofaa.
- Usikanyage au kuzima kinu cha kukanyaga wakati mkanda unasonga.
- Ukihisi kuzimia, kizunguzungu, au kupata maumivu, acha kufanya mazoezi mara moja.
- The maximum user weight capacity for this treadmill is 100 kg. Do not exceed this limit.
- Always use the handrail for stability, especially when starting or stopping the treadmill.
3. Ni nini kwenye Sanduku
Fungua kwa uangalifu vipengele vyote na uhakikishe umepokea vitu vifuatavyo:
- HMS LOOP08 Electric Treadmill Unit
- Handrail
- Transport wheels (integrated)
- Kamba ya nguvu
- Mwongozo wa Mtumiaji (hati hii)
4. Kuweka na Kukusanya
The HMS LOOP08 treadmill is designed for minimal assembly. Follow these steps to set up your treadmill:
- Ondoa treadmill kutoka kwa ufungaji wake na kuiweka kwenye uso wa gorofa, imara.
- Unfold the treadmill to its operational position. The compact design allows for easy unfolding.
- Raise the integrated handrail. The handrail features a telescopic mechanism that locks it into the correct position and prevents uncontrolled lowering. Ensure it is securely locked before use.
- Connect the power cord to the treadmill's power input and then to a grounded electrical outlet.
- Ensure all connections are secure and the treadmill is stable before proceeding.

Figure 1: HMS LOOP08 Treadmill in operational position with handrail extended.

Kielelezo cha 2: Nyingine view of the HMS LOOP08 Treadmill, highlighting its compact design.

Kielelezo 3: Juu view of the HMS LOOP08 Treadmill, showing the running surface and integrated display.
5. Maagizo ya Uendeshaji
The LOOP08 features an intuitive operating system:
- Washa: Plug in the treadmill. The integrated digital display will illuminate.
- Anza Mafunzo: Simply step onto the running belt to activate the treadmill. It will begin moving at a low speed.
- Udhibiti wa Kasi:
- Kwa kuongezeka speed, move towards the front of the treadmill, closer to the display.
- Kwa kupungua speed, move towards the rear of the treadmill.
- Maelezo ya Kuonyesha: The integrated display shows real-time data including:
- Umbali umefunikwa
- Muda wa mafunzo
- Idadi ya hatua
- Kasi ya sasa
- Calories burned (estimated)
- Stopping the Treadmill: To stop, simply step off the treadmill. The belt will gradually slow down and stop.
Kumbuka: The treadmill operates quietly with a noise level of approximately 65dB.
6. Vipengele
The HMS LOOP08 Electric Treadmill incorporates several advanced features for an enhanced user experience:
- Intelligent Training Start System: The treadmill activates automatically when you step onto the running belt.
- Modern Speed Control Mechanism: Speed adjusts intuitively based on your position on the running surface.
- Mfumo wa kunyonya kwa mshtuko: Designed to absorb impacts during running, reducing strain on joints.
- Integrated Digital Display: A thin running surface with an embedded display shows key workout metrics without a bulky console.
- Muundo wa Kushikamana na Kubebeka: When stored vertically, the treadmill occupies only 0.06m2. It is lightweight and features transport wheels for easy relocation.
- Telescopic Handrail: Provides additional safety and comfort, especially during faster speeds, and locks securely into place.
- Operesheni ya utulivu: Operates at a low noise level of approximately 65dB.
7. Matengenezo
Regular maintenance ensures the longevity and optimal performance of your treadmill:
- Kusafisha: Futa sehemu za kinu kwa kutumia tangazoamp kitambaa baada ya kila matumizi. Usitumie visafishaji au viyeyusho vya kukwaruza.
- Kupaka Ukanda: The running belt may require periodic lubrication. Refer to the specific instructions provided with your treadmill's lubrication kit (if included) or consult the manufacturer's guidelines for recommended lubrication frequency and type.
- Mvutano wa ukanda na usawazishaji: Periodically check the running belt for proper tension and alignment. If the belt slips or drifts to one side, adjust it according to the instructions in the troubleshooting section or consult customer support.
- Hifadhi: When not in use, the treadmill can be folded and stored vertically to save space. Ensure it is stored in a dry, clean environment.
8. Utatuzi wa shida
Ukikumbana na matatizo na kinu chako, rejelea matatizo na masuluhisho yafuatayo:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Kinu cha kukanyaga hakiwashi. | Power cord not connected; outlet issue; circuit breaker tripped. | Ensure power cord is securely plugged into treadmill and a working, grounded outlet. Check household circuit breaker. |
| Ukanda wa kukimbia huteleza au kusitasita. | Mkanda umelegea sana; mkanda unahitaji kulainishwa. | Adjust belt tension (refer to specific instructions for adjustment screws, usually at the rear of the treadmill). Lubricate the belt if necessary. |
| Belt drifts to one side. | Tatizo la upangaji wa mikanda. | Adjust belt alignment screws (usually at the rear of the treadmill) until the belt is centered. Run the treadmill at a low speed to check alignment. |
| Kelele isiyo ya kawaida wakati wa operesheni. | Loose components; belt friction; motor issue. | Check for any loose screws or parts. Lubricate the belt if friction is suspected. If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact HMS customer support.
9. Vipimo
Detailed technical specifications for the HMS LOOP08 Electric Treadmill:
| Kipengele | Vipimo |
|---|---|
| Mfano | LOOP08 |
| Rangi | Kijivu |
| Nguvu ya Magari (HP) | 0.5 HP |
| Kiwango cha kasi | 1 - 8 km / h |
| Running Belt Dimensions (L x W) | 1200 mm x 460 mm |
| Aina ya Kuonyesha | LED (Imeunganishwa) |
| Displayed Metrics | Time, Distance, Steps, Speed, Calories |
| Kiwango cha Kelele | Takriban. 65dB |
| Uzito wa Juu wa Mtumiaji | 100 kg |
| Vipimo Vilivyofunuliwa (L x W x H) | Approx. 160 cm x 70 cm x 120 cm (estimated) |
| Folded Storage Area | 0.06 m2 (when stored vertically) |
| Uzito wa Bidhaa | 31 kg |
| Chanzo cha Nguvu | Umeme wa Cord |
| Nyenzo | Plastic, Metal, Aluminum Frame |
10. Udhamini na Msaada
HMS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your local HMS distributor or visit the official HMS website. Please have your product model number (LOOP08) and purchase details ready when contacting support.
For further assistance, you may visit the HMS official webtovuti: www.hms-sport.com





