Miongozo+

Chini 000-14489-001

Lowrance Active Imaging 3-In-1 Transducer

Model: 000-14489-001 Instruction Manual

1. Utangulizi

This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001). This transducer is designed to enhance your marine electronics system by providing detailed sonar imaging capabilities. Please read this manual thoroughly before installation and use.

2. Taarifa za Usalama

Zingatia tahadhari zifuatazo za usalama ili kuzuia majeraha na uharibifu wa kifaa:

  • Always disconnect power to the marine electronics system before installing or servicing the transducer.
  • Ensure all connections are secure and waterproof to prevent electrical shorts or corrosion.
  • Mount the transducer in a location where it will not interfere with boat operation or pose a hazard to swimmers.
  • Avoid exposing the transducer to extreme temperatures or harsh chemicals.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:

  • Lowrance Active Imaging 3-In-1 Transducer
  • Transom Mount Bracket
  • Vifaa vya Kupachika (skrubu, mashine za kuosha, njugu)
  • Kiolezo cha Usakinishaji (ikiwa kimejumuishwa)

4. Kuweka na Kuweka

The Lowrance Active Imaging 3-In-1 Transducer is designed for transom mounting. Proper placement is crucial for optimal performance.

4.1 Mahali pa Kuweka

Select a location on the transom that is:

  • Free from obstructions (e.g., propellers, strakes, other transducers).
  • In an area of smooth water flow, minimizing turbulence.
  • Accessible for installation and maintenance.

4.2 Ufungaji wa Kimwili

  1. Position the transom mount bracket on the selected location. Ensure the bottom of the transducer will be slightly below the hull line when deployed.
  2. Weka alama kwenye mashimo ya kuchimba kwa kutumia bracket kama kiolezo.
  3. Drill pilot holes. Apply marine sealant to prevent water intrusion.
  4. Secure the transom mount bracket to the boat using the provided mounting hardware.
  5. Attach the transducer to the bracket. Adjust the angle so the transducer face is parallel to the waterline.
Lowrance Active Imaging 3-In-1 Transducer with transom mount, angled view

Kielelezo cha 1: Mwenye pembe view of the Lowrance Active Imaging 3-In-1 Transducer with its transom mount bracket.

Lowrance Active Imaging 3-In-1 Transducer, side view

Kielelezo cha 2: Upande view of the transducer, illustrating its profile and mounting position.

Lowrance Active Imaging 3-In-1 Transducer, bottom view

Kielelezo cha 3: Chini view of the transducer, showing the sonar elements.

4.3 Muunganisho wa Umeme

Route the transducer cable to your compatible Lowrance display unit (e.g., HDS LIVE, HDS Carbon, Elite Ti2). The transducer features a 9-Pin connection. Ensure the connector is fully seated and the locking collar is tightened to create a waterproof seal.

5. Maagizo ya Uendeshaji

The Active Imaging 3-In-1 Transducer combines multiple sonar technologies to provide a comprehensive view ya mazingira ya chini ya maji.

5.1 Sonar Frequencies and Modes

  • Med/High CHIRP: Provides traditional sonar views for fish arches and bottom tracking.
  • SideScan: Offers wide, high-resolution views of structure and fish to the sides of your boat.
  • DownScan: Delivers picture-like views of structure and fish directly below your boat.

Refer to your Lowrance display unit's manual for detailed instructions on selecting and optimizing these sonar modes.

6. Matengenezo

Regular maintenance ensures optimal performance and longevity of your transducer.

  • Kusafisha: Periodically clean the transducer face with mild soap and water to remove marine growth, dirt, or oil. Avoid abrasive cleaners or solvents.
  • Ukaguzi: Regularly inspect the transducer cable for cuts, kinks, or damage. Check the mounting bracket for looseness or corrosion.
  • Majira ya baridi: If operating in freezing conditions, ensure the transducer is not exposed to ice formation, which can cause damage.

7. Utatuzi wa shida

If you experience issues with your transducer, consider the following common problems and solutions:

TatizoSababu inayowezekanaSuluhisho
No Sonar ReadingLoose connection, power issue, transducer not submerged.Check cable connections, verify power to display unit, ensure transducer is in water.
Poor or Intermittent ImagingAir bubbles, marine growth, incorrect mounting angle, electrical interference.Clean transducer face, adjust mounting angle, check for sources of electrical noise, reposition transducer if necessary.
SideScan/DownScan Not WorkingIncorrect display unit settings, damaged transducer element.Verify sonar settings on your display unit. If problem persists, contact support.

For persistent issues, consult your Lowrance display unit's manual or contact Lowrance customer support.

8. Vipimo

  • Mfano: 000-14489-001
  • Aina: Active Imaging 3-In-1 Transducer
  • Masafa: Med/High CHIRP, SideScan, DownScan
  • Muunganisho: 9-Pini
  • Aina ya Kupachika: Mlima wa Transom
  • Vipimo: Takriban inchi 8 x 6 x 4 (cm 20.3 x 15.2 x 10.2)
  • Uzito: Takriban pauni 3.66 (kilo 1.66)
  • Vitengo Vinavyolingana: HDS LIVE, HDS Carbon, Elite Ti2 series

9. Udhamini na Msaada

This Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001) is covered by a Udhamini mdogo wa siku 90 kuanzia tarehe ya ununuzi. Udhamini huu unashughulikia kasoro katika nyenzo na utengenezaji chini ya matumizi ya kawaida.

For warranty claims, technical support, or further assistance, please refer to the official Lowrance webtovuti au wasiliana na idara yao ya huduma kwa wateja. Weka uthibitisho wako wa ununuzi kwa uthibitisho wa udhamini.

Nyaraka Zinazohusiana - 000-14489-001

Kablaview Maswali Yanayoulizwa Mara kwa Mara ya Lowrance Elite-7: Upigaji Picha Mseto wa Uwili, Vibadilishaji sauti, na Mitandao
Gundua Maswali Yanayoulizwa Mara kwa Mara ya Lowrance Elite-7, inayohusu teknolojia ya sonar ya Hybrid Dual Imaging (HDI), uwezo wa mitandao, uoanifu wa transducer, na ulinganisho na miundo mingine ya Lowrance. Pata maelezo kuhusu vipengele vya HDI, muunganisho wa NMEA2000 na vifuasi vinavyopatikana.
Kablaview Kiolezo cha Ufungaji na Upachikaji cha Lowrance Eagle 4x
Mwongozo wa usakinishaji na kiolezo cha kupachika cha Lowrance Eagle 4x fishfinder, ikijumuisha vipimo vya kiufundi, vifaa vilivyojumuishwa, na maagizo ya kupachika.
Kablaview Mwongozo wa Ufungaji wa Transducer ya Lowrance Tripleshot HD: Usanidi na Maelezo
Mwongozo huu unatoa maagizo ya kina ya kusakinisha Transducer ya Lowrance Tripleshot HD, inayofunika uwekaji wa transom, kuunganisha, kuweka nyaya, na maelezo ya kiufundi ya kina kwa utendakazi bora wa sonar baharini.
Kablaview Mwongozo wa Usakinishaji wa Lowrance Eagle 7 na 9
Installation guide for the Lowrance Eagle 7 and 9 series fishfinders, covering gimbal and panel mounting, wiring, dimensions, and technical specifications.
Kablaview Mwongozo wa Opereta wa Msururu wa Tai wa Lowrance
Mwongozo wa kina wa waendeshaji kwa ajili ya watafuta samaki wa Msururu wa Tai wa Lowrance, unaoshughulikia utendakazi msingi, ubinafsishaji, chati, urambazaji, sonar, uchoraji wa ramani ya muundo, kengele, zana, matengenezo na vitendaji vya kiigaji.
Kablaview Mwongozo wa Ufungaji wa Lowrance ActiveTarget 2
Mwongozo wa usakinishaji wa mfumo wa sonar wa moja kwa moja wa Lowrance ActiveTarget 2, unaoelezea usanidi, uunganisho wa nyaya na vipimo vya kiufundi.